if USB_SUPPORT
+config USB_COMMON
+ tristate
+ default y
+ depends on USB || USB_GADGET
+
# Host-side USB depends on having a host controller
# NOTE: dummy_hcd is always an option, but it's ignored here ...
# NOTE: SL-811 option should be board-specific ...
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
obj-$(CONFIG_USB_OTG_UTILS) += otg/
obj-$(CONFIG_USB_GADGET) += gadget/
+
+obj-$(CONFIG_USB_COMMON) += usb-common.o
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
- char *speed, *type;
+ const char *speed;
int devnum = udev->devnum;
/* root hub ports have a slightly longer reset period
default:
goto fail;
}
-
- type = "";
- switch (udev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- case USB_SPEED_SUPER:
- speed = "super";
- break;
- case USB_SPEED_WIRELESS:
- speed = "variable";
- type = "Wireless ";
- break;
- default: speed = "?"; break;
- }
+
+ if (udev->speed == USB_SPEED_WIRELESS)
+ speed = "variable speed Wireless";
+ else
+ speed = usb_speed_string(udev->speed);
+
if (udev->speed != USB_SPEED_SUPER)
dev_info(&udev->dev,
- "%s %s speed %sUSB device number %d using %s\n",
- (udev->config) ? "reset" : "new", speed, type,
+ "%s %s USB device number %d using %s\n",
+ (udev->config) ? "reset" : "new", speed,
devnum, udev->bus->controller->driver->name);
/* Set up TT records, if needed */
/* link up all endpoints */
udc_setup_endpoints(dev);
- if (dev->gadget.speed == USB_SPEED_HIGH) {
- dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
- "high");
- } else if (dev->gadget.speed == USB_SPEED_FULL) {
- dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
- "full");
- }
+ dev_info(&dev->pdev->dev, "Connect: %s\n",
+ usb_speed_string(dev->gadget.speed));
/* init ep 0 */
activate_control_endpoints(dev);
spin_lock(&udc->lock);
}
- if (status & USBA_HIGH_SPEED) {
- DBG(DBG_BUS, "High-speed bus reset detected\n");
+ if (status & USBA_HIGH_SPEED)
udc->gadget.speed = USB_SPEED_HIGH;
- } else {
- DBG(DBG_BUS, "Full-speed bus reset detected\n");
+ else
udc->gadget.speed = USB_SPEED_FULL;
- }
+ DBG(DBG_BUS, "%s bus reset detected\n",
+ usb_speed_string(udc->gadget.speed));
ep0 = &usba_ep[0];
ep0->desc = &usba_ep0_desc;
result = 0;
}
- INFO(cdev, "%s speed config #%d: %s\n",
- ({ char *speed;
- switch (gadget->speed) {
- case USB_SPEED_LOW:
- speed = "low";
- break;
- case USB_SPEED_FULL:
- speed = "full";
- break;
- case USB_SPEED_HIGH:
- speed = "high";
- break;
- case USB_SPEED_SUPER:
- speed = "super";
- break;
- default:
- speed = "?";
- break;
- } ; speed; }), number, c ? c->label : "unconfigured");
+ INFO(cdev, "%s config #%d: %s\n",
+ usb_speed_string(gadget->speed),
+ number, c ? c->label : "unconfigured");
if (!c)
goto done;
fsg->config = new_config;
if ((rc = do_set_interface(fsg, 0)) != 0)
fsg->config = 0; // Reset on errors
- else {
- char *speed;
-
- switch (fsg->gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
- INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
- }
+ else
+ INFO(fsg, "%s config #%d\n",
+ usb_speed_string(fsg->gadget->speed),
+ fsg->config);
}
return rc;
}
}
}
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+ switch (speed & PORTSCX_PORT_SPEED_MASK) {
+ case PORTSCX_PORT_SPEED_HIGH:
+ return USB_SPEED_HIGH;
+ case PORTSCX_PORT_SPEED_FULL:
+ return USB_SPEED_FULL;
+ case PORTSCX_PORT_SPEED_LOW:
+ return USB_SPEED_LOW;
+ default:
+ return USB_SPEED_UNKNOWN;
+ }
+}
+
/* Process a port change interrupt */
static void port_change_irq(struct fsl_udc *udc)
{
- u32 speed;
-
if (udc->bus_reset)
udc->bus_reset = 0;
/* Bus resetting is finished */
- if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+ if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
/* Get the speed */
- speed = (fsl_readl(&dr_regs->portsc1)
- & PORTSCX_PORT_SPEED_MASK);
- switch (speed) {
- case PORTSCX_PORT_SPEED_HIGH:
- udc->gadget.speed = USB_SPEED_HIGH;
- break;
- case PORTSCX_PORT_SPEED_FULL:
- udc->gadget.speed = USB_SPEED_FULL;
- break;
- case PORTSCX_PORT_SPEED_LOW:
- udc->gadget.speed = USB_SPEED_LOW;
- break;
- default:
- udc->gadget.speed = USB_SPEED_UNKNOWN;
- break;
- }
- }
+ udc->gadget.speed =
+ portscx_device_speed(fsl_readl(&dr_regs->portsc1));
/* Update USB state */
if (!udc->resume_state)
default:
s = "None"; break;
}
- s;} ), ( {
- char *s;
- switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
- case PORTSCX_PORT_SPEED_FULL:
- s = "Full Speed"; break;
- case PORTSCX_PORT_SPEED_LOW:
- s = "Low Speed"; break;
- case PORTSCX_PORT_SPEED_HIGH:
- s = "High Speed"; break;
- default:
- s = "Undefined"; break;
- }
- s;
- } ),
+ s;} ),
+ usb_speed_string(portscx_device_speed(tmp_reg)),
(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
"Normal PHY mode" : "Low power mode",
(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
if (result) {
gmidi_reset_config(dev);
} else {
- char *speed;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
-
dev->config = number;
- INFO(dev, "%s speed\n", speed);
+ INFO(dev, "%s speed\n", usb_speed_string(gadget->speed));
}
return result;
}
"BmAttributes: %d\n\n",
LPM_PTS(tmp_reg),
(tmp_reg & LPM_STS) ? 1 : 0,
- ({
- char *s;
- switch (LPM_PSPD(tmp_reg)) {
- case LPM_SPEED_FULL:
- s = "Full Speed"; break;
- case LPM_SPEED_LOW:
- s = "Low Speed"; break;
- case LPM_SPEED_HIGH:
- s = "High Speed"; break;
- default:
- s = "Unknown Speed"; break;
- }
- s;
- }),
+ usb_speed_string(lpm_device_speed(tmp_reg)),
(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
LPM_BA(tmp_reg));
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
+static inline enum usb_device_speed lpm_device_speed(u32 reg)
+{
+ switch (LPM_PSPD(reg)) {
+ case LPM_SPEED_HIGH:
+ return USB_SPEED_HIGH;
+ case LPM_SPEED_FULL:
+ return USB_SPEED_FULL;
+ case LPM_SPEED_LOW:
+ return USB_SPEED_LOW;
+ default:
+ return USB_SPEED_UNKNOWN;
+ }
+}
/* port change detect interrupt handler */
static void handle_port_change(struct langwell_udc *dev)
{
u32 portsc1, devlc;
- u32 speed;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
/* bus reset is finished */
if (!(portsc1 & PORTS_PR)) {
/* get the speed */
- speed = LPM_PSPD(devlc);
- switch (speed) {
- case LPM_SPEED_HIGH:
- dev->gadget.speed = USB_SPEED_HIGH;
- break;
- case LPM_SPEED_FULL:
- dev->gadget.speed = USB_SPEED_FULL;
- break;
- case LPM_SPEED_LOW:
- dev->gadget.speed = USB_SPEED_LOW;
- break;
- default:
- dev->gadget.speed = USB_SPEED_UNKNOWN;
- break;
- }
- dev_vdbg(&dev->pdev->dev,
- "speed = %d, dev->gadget.speed = %d\n",
- speed, dev->gadget.speed);
+ dev->gadget.speed = lpm_device_speed(devlc);
+ dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
+ dev->gadget.speed);
}
/* LPM L0 to L1 */
dev->gadget.speed = USB_SPEED_HIGH;
else
dev->gadget.speed = USB_SPEED_FULL;
- dev_dbg(dev->dev, "%s speed\n",
- (dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+ dev_dbg(dev->dev, "%s\n",
+ usb_speed_string(dev->gadget.speed));
}
ep = &dev->ep[0];
else
dev->gadget.speed = USB_SPEED_FULL;
net2280_led_speed (dev, dev->gadget.speed);
- DEBUG (dev, "%s speed\n",
- (dev->gadget.speed == USB_SPEED_HIGH)
- ? "high" : "full");
+ DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
}
ep = &dev->ep [0];
usb_gadget_vbus_draw(dev->gadget,
dev->gadget->is_otg ? 8 : 100);
} else {
- char *speed;
unsigned power;
power = 2 * config_desc.bMaxPower;
usb_gadget_vbus_draw(dev->gadget, power);
- switch (gadget->speed) {
- case USB_SPEED_FULL: speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_SPEED_HIGH: speed = "high"; break;
-#endif
- default: speed = "?"; break;
- }
-
dev->config = number;
- INFO(dev, "%s speed config #%d: %d mA, %s\n",
- speed, number, power, driver_desc);
+ INFO(dev, "%s config #%d: %d mA, %s\n",
+ usb_speed_string(gadget->speed),
+ number, power, driver_desc);
}
return result;
}
case S3C_DSTS_EnumSpd_FS:
case S3C_DSTS_EnumSpd_FS48:
hsotg->gadget.speed = USB_SPEED_FULL;
- dev_info(hsotg->dev, "new device is full-speed\n");
-
ep0_mps = EP0_MPS_LIMIT;
ep_mps = 64;
break;
case S3C_DSTS_EnumSpd_HS:
- dev_info(hsotg->dev, "new device is high-speed\n");
hsotg->gadget.speed = USB_SPEED_HIGH;
-
ep0_mps = EP0_MPS_LIMIT;
ep_mps = 512;
break;
case S3C_DSTS_EnumSpd_LS:
hsotg->gadget.speed = USB_SPEED_LOW;
- dev_info(hsotg->dev, "new device is low-speed\n");
-
/* note, we don't actually support LS in this driver at the
* moment, and the documentation seems to imply that it isn't
* supported by the PHYs on some of the devices.
*/
break;
}
+ dev_info(hsotg->dev, "new device is %s\n",
+ usb_speed_string(hsotg->gadget.speed));
/* we should now know the maximum packet size for an
* endpoint, so set the endpoints to a default value. */
struct device_attribute *attr, char *buf)
{
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
- struct usb_gadget *gadget = udc->gadget;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW:
- return snprintf(buf, PAGE_SIZE, "low-speed\n");
- case USB_SPEED_FULL:
- return snprintf(buf, PAGE_SIZE, "full-speed\n");
- case USB_SPEED_HIGH:
- return snprintf(buf, PAGE_SIZE, "high-speed\n");
- case USB_SPEED_WIRELESS:
- return snprintf(buf, PAGE_SIZE, "wireless\n");
- case USB_SPEED_SUPER:
- return snprintf(buf, PAGE_SIZE, "super-speed\n");
- case USB_SPEED_UNKNOWN: /* FALLTHROUGH */
- default:
- return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
- }
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ usb_speed_string(udc->gadget->speed));
}
static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
usb_set_intfdata(intf, dev);
dev_info(&intf->dev, "%s\n", info->name);
- dev_info(&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
- ({ char *tmp;
- switch (udev->speed) {
- case USB_SPEED_LOW:
- tmp = "low";
- break;
- case USB_SPEED_FULL:
- tmp = "full";
- break;
- case USB_SPEED_HIGH:
- tmp = "high";
- break;
- case USB_SPEED_SUPER:
- tmp = "super";
- break;
- default:
- tmp = "unknown";
- break;
- }; tmp; }),
+ dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n",
+ usb_speed_string(udev->speed),
info->ctrl_out ? " in/out" : "",
rtest, wtest,
irtest, iwtest,
--- /dev/null
+/*
+ * Provides code common for host and device side USB.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * If either host side (ie. CONFIG_USB=y) or device side USB stack
+ * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is
+ * compiled-in as well. Otherwise, if either of the two stacks is
+ * compiled as module, this file is compiled as module as well.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/ch9.h>
+
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+ static const char *const names[] = {
+ [USB_SPEED_UNKNOWN] = "UNKNOWN",
+ [USB_SPEED_LOW] = "low-speed",
+ [USB_SPEED_FULL] = "full-speed",
+ [USB_SPEED_HIGH] = "high-speed",
+ [USB_SPEED_WIRELESS] = "wireless",
+ [USB_SPEED_SUPER] = "super-speed",
+ };
+
+ if (speed < 0 || speed >= ARRAY_SIZE(names))
+ speed = USB_SPEED_UNKNOWN;
+ return names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
+
+MODULE_LICENSE("GPL");
USB_SPEED_SUPER, /* usb 3.0 */
};
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff