powerpc/virtex: Add Xilinx ML510 reference design support

Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0d83a6a0397d56e5777179c640483218cd9a82d9..90e3192611a4d52d5b19d2b8876912453fcdec84 100644 (file)
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -156,7 +156,7 @@ config YOSEMITE
 #        This option enables support for the IBM PPC440GX evaluation board.
 
 config XILINX_VIRTEX440_GENERIC_BOARD
-       bool "Generic Xilinx Virtex 440 board"
+       bool "Generic Xilinx Virtex 5 FXT board support"
        depends on 44x
        default n
        select XILINX_VIRTEX_5_FXT
@@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD
          Most Virtex 5 designs should use this unless it needs to do some
          special configuration at board probe time.
 
+config XILINX_ML510
+       bool "Xilinx ML510 extra support"
+       depends on XILINX_VIRTEX440_GENERIC_BOARD
+       select PPC_PCI_CHOICE
+       select XILINX_PCI if PCI
+       select PPC_INDIRECT_PCI if PCI
+       select PPC_I8259 if PCI
+       help
+         This option enables extra support for features on the Xilinx ML510
+         board.  The ML510 has a PCI bus with ALI south bridge.
+
 config PPC44x_SIMPLE
        bool "Simple PowerPC 44x board support"
        depends on 44x

diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 01f51daace13943c2714d6b00751d38666915c12..ee6185aeaa3b9b98e0382267d31484105d7d7237 100644 (file)
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY)     += ebony.o
 obj-$(CONFIG_SAM440EP)         += sam440ep.o
 obj-$(CONFIG_WARP)     += warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o

diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c
new file mode 100644 (file)
index 0000000..ba4a6e3
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex_ml510.c
@@ -0,0 +1,29 @@
+#include <asm/i8259.h>
+#include <linux/pci.h>
+#include "44x.h"
+
+/**
+ * ml510_ail_quirk
+ */
+static void __devinit ml510_ali_quirk(struct pci_dev *dev)
+{
+       /* Enable the IDE controller */
+       pci_write_config_byte(dev, 0x58, 0x4c);
+       /* Assign irq 14 to the primary ide channel */
+       pci_write_config_byte(dev, 0x44, 0x0d);
+       /* Assign irq 15 to the secondary ide channel */
+       pci_write_config_byte(dev, 0x75, 0x0f);
+       /* Set the ide controller in native mode */
+       pci_write_config_byte(dev, 0x09, 0xff);
+
+       /* INTB = disabled, INTA = disabled */
+       pci_write_config_byte(dev, 0x48, 0x00);
+       /* INTD = disabled, INTC = disabled */
+       pci_write_config_byte(dev, 0x4a, 0x00);
+       /* Audio = INT7, Modem = disabled. */
+       pci_write_config_byte(dev, 0x4b, 0x60);
+       /* USB = INT7 */
+       pci_write_config_byte(dev, 0x74, 0x06);
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk);
+

diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 90b57724a5e4dbcb1eca51e313221c694299dd27..3ee1fd37bbfc3b819107a8dd4d9b2496f59ecc84 100644 (file)
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -257,6 +257,11 @@ static void __init xilinx_i8259_setup_cascade(void)
        i8259_init(cascade_node, 0);
        set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade);
 
+       /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+       /* This looks like a dirty hack to me --gcl */
+       outb(0xc0, 0x4d0);
+       outb(0xc0, 0x4d1);
+
  out:
        of_node_put(cascade_node);
 }