greybus: APBridge: move APBridge request protocol to a common .h file
authorGreg Kroah-Hartman <gregkh@google.com>
Thu, 31 Dec 2015 19:14:33 +0000 (11:14 -0800)
committerGreg Kroah-Hartman <gregkh@google.com>
Tue, 12 Jan 2016 19:12:25 +0000 (11:12 -0800)
This moves all of the APBridge request protocol commands that are
currently used to a common .h file for everyone to be able to use them
in the future, where needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
drivers/staging/greybus/camera.c
drivers/staging/greybus/es2.c
drivers/staging/greybus/greybus_protocols.h

index ac9ade367e0a8afe91af77e2e2a250e5c55e9da6..783a435bbae6b12ce7a589b4d4da39a3c2698bbb 100644 (file)
@@ -73,9 +73,6 @@ struct gb_camera_stream_config {
  * Camera Protocol Operations
  */
 
-/* vendor request to control the CSI transmitter */
-#define REQUEST_CSI_TX_CONTROL 0x08
-
 struct ap_csi_config_request {
        __u8 csi_id;
        __u8 clock_mode;
@@ -169,13 +166,13 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
                csi_cfg.num_lanes = 4;
                csi_cfg.bus_freq = cpu_to_le32(960000000);
                ret = gb_hd_output(gcam->connection->hd, &csi_cfg,
-                                  sizeof(csi_cfg), REQUEST_CSI_TX_CONTROL,
-                                  false);
+                                  sizeof(csi_cfg),
+                                  GB_APB_REQUEST_CSI_TX_CONTROL, false);
        } else if (nstreams == 0) {
                csi_cfg.csi_id = 1;
                ret = gb_hd_output(gcam->connection->hd, &csi_cfg,
-                                  sizeof(csi_cfg), REQUEST_CSI_TX_CONTROL,
-                                  false);
+                                  sizeof(csi_cfg),
+                                  GB_APB_REQUEST_CSI_TX_CONTROL, false);
        }
 
        if (ret < 0)
index 1b5487fec903b8e7f04022cc11700c6b2351783f..e39bd58e3a5c246e1813a81bd38df468850d11b7 100644 (file)
@@ -44,25 +44,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
  */
 #define NUM_CPORT_OUT_URB      (8 * NUM_BULKS)
 
-/* vendor request APB1 log */
-#define REQUEST_LOG            0x02
-
-/* vendor request to map a cport to bulk in and bulk out endpoints */
-#define REQUEST_EP_MAPPING     0x03
-
-/* vendor request to get the number of cports available */
-#define REQUEST_CPORT_COUNT    0x04
-
-/* vendor request to reset a cport state */
-#define REQUEST_RESET_CPORT    0x05
-
-/* vendor request to time the latency of messages on a given cport */
-#define REQUEST_LATENCY_TAG_EN 0x06
-#define REQUEST_LATENCY_TAG_DIS        0x07
-
-/* vendor request to control the CSI transmitter */
-#define REQUEST_CSI_TX_CONTROL 0x08
-
 /*
  * @endpoint: bulk in endpoint for CPort data
  * @urb: array of urbs for the CPort in messages
@@ -191,7 +172,7 @@ static int map_cport_to_ep(struct es2_ap_dev *es2,
 
        retval = usb_control_msg(es2->usb_dev,
                                 usb_sndctrlpipe(es2->usb_dev, 0),
-                                REQUEST_EP_MAPPING,
+                                GB_APB_REQUEST_EP_MAPPING,
                                 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
                                 0x00, 0x00,
                                 (char *)cport_to_ep,
@@ -521,7 +502,7 @@ static int cport_reset(struct gb_host_device *hd, u16 cport_id)
        int retval;
 
        retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                                REQUEST_RESET_CPORT,
+                                GB_APB_REQUEST_RESET_CPORT,
                                 USB_DIR_OUT | USB_TYPE_VENDOR |
                                 USB_RECIP_INTERFACE, cport_id, 0,
                                 NULL, 0, ES2_TIMEOUT);
@@ -559,7 +540,7 @@ static int latency_tag_enable(struct gb_host_device *hd, u16 cport_id)
        }
 
        retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                                REQUEST_LATENCY_TAG_EN,
+                                GB_APB_REQUEST_LATENCY_TAG_EN,
                                 USB_DIR_OUT | USB_TYPE_VENDOR |
                                 USB_RECIP_INTERFACE, cport_id, 0, NULL,
                                 0, ES2_TIMEOUT);
@@ -582,7 +563,7 @@ static int latency_tag_disable(struct gb_host_device *hd, u16 cport_id)
        }
 
        retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                                REQUEST_LATENCY_TAG_DIS,
+                                GB_APB_REQUEST_LATENCY_TAG_DIS,
                                 USB_DIR_OUT | USB_TYPE_VENDOR |
                                 USB_RECIP_INTERFACE, cport_id, 0, NULL,
                                 0, ES2_TIMEOUT);
@@ -756,7 +737,7 @@ static void apb_log_get(struct es2_ap_dev *es2, char *buf)
        do {
                retval = usb_control_msg(es2->usb_dev,
                                        usb_rcvctrlpipe(es2->usb_dev, 0),
-                                       REQUEST_LOG,
+                                       GB_APB_REQUEST_LOG,
                                        USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
                                        0x00, 0x00,
                                        buf,
@@ -885,7 +866,7 @@ static int apb_get_cport_count(struct usb_device *udev)
                return -ENOMEM;
 
        retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-                                REQUEST_CPORT_COUNT,
+                                GB_APB_REQUEST_CPORT_COUNT,
                                 USB_DIR_IN | USB_TYPE_VENDOR |
                                 USB_RECIP_INTERFACE, 0, 0, cport_count,
                                 sizeof(*cport_count), ES2_TIMEOUT);
index 67f260beba63fa6de51acf7f68f80e62a1910da8..dfa3d29b78b34ac7a42a0706d44d1f298971b9d1 100644 (file)
@@ -154,6 +154,28 @@ struct gb_control_interface_version_response {
 } __packed;
 
 
+/* APBridge protocol */
+
+/* request APB1 log */
+#define GB_APB_REQUEST_LOG             0x02
+
+/* request to map a cport to bulk in and bulk out endpoints */
+#define GB_APB_REQUEST_EP_MAPPING      0x03
+
+/* request to get the number of cports available */
+#define GB_APB_REQUEST_CPORT_COUNT     0x04
+
+/* request to reset a cport state */
+#define GB_APB_REQUEST_RESET_CPORT     0x05
+
+/* request to time the latency of messages on a given cport */
+#define GB_APB_REQUEST_LATENCY_TAG_EN  0x06
+#define GB_APB_REQUEST_LATENCY_TAG_DIS 0x07
+
+/* request to control the CSI transmitter */
+#define GB_APB_REQUEST_CSI_TX_CONTROL  0x08
+
+
 /* Firmware Protocol */
 
 /* Version of the Greybus firmware protocol we support */