PCI: Set PCIE maxpayload for card during hotplug insertion

The following patch sets the MaxPayload setting to match the parent
reading when inserting a PCIE card into a hotplug slot.  On our system,
the upstream bridge is set to 256, but when inserting a card, the card
setting defaults to 128.  As soon as I/O is performed to the card it
starts receiving errors since the payload size is too small.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c
index 80b461c985579da3905744c36aabfd215c9cac06..749fdf0703199cef927004c6fa8b803d28ae1368 100644 (file)
--- a/drivers/pci/hotplug/pcihp_slot.c
+++ b/drivers/pci/hotplug/pcihp_slot.c
@@ -158,6 +158,47 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
         */
 }
 
+/* Program PCIE MaxPayload setting on device: ensure parent maxpayload <= device */
+static int pci_set_payload(struct pci_dev *dev)
+{
+       int pos, ppos;
+       u16 pctl, psz;
+       u16 dctl, dsz, dcap, dmax;
+       struct pci_dev *parent;
+
+       parent = dev->bus->self;
+       pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+       if (!pos)
+               return 0;
+
+       /* Read Device MaxPayload capability and setting */
+       pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &dctl);
+       pci_read_config_word(dev, pos + PCI_EXP_DEVCAP, &dcap);
+       dsz = (dctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+       dmax = (dcap & PCI_EXP_DEVCAP_PAYLOAD);
+
+       /* Read Parent MaxPayload setting */
+       ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+       if (!ppos)
+               return 0;
+       pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
+       psz = (pctl &  PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+
+       /* If parent payload > device max payload -> error
+        * If parent payload > device payload -> set speed
+        * If parent payload <= device payload -> do nothing
+        */
+       if (psz > dmax)
+               return -1;
+       else if (psz > dsz) {
+               dev_info(&dev->dev, "Setting MaxPayload to %d\n", 128 << psz);
+               pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+                                     (dctl & ~PCI_EXP_DEVCTL_PAYLOAD) +
+                                     (psz << 5));
+       }
+       return 0;
+}
+
 void pci_configure_slot(struct pci_dev *dev)
 {
        struct pci_dev *cdev;
@@ -169,6 +210,10 @@ void pci_configure_slot(struct pci_dev *dev)
                        (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
                return;
 
+       ret = pci_set_payload(dev);
+       if (ret)
+               dev_warn(&dev->dev, "could not set device max payload\n");
+
        memset(&hpp, 0, sizeof(hpp));
        ret = pci_get_hp_params(dev, &hpp);
        if (ret)