[ARM] Kirkwood: CPU idle driver
authorRabeeh Khoury <rabeeh@marvell.com>
Tue, 24 Mar 2009 14:10:15 +0000 (16:10 +0200)
committerNicolas Pitre <nico@cam.org>
Mon, 8 Jun 2009 17:04:41 +0000 (13:04 -0400)
The patch adds support for Kirkwood cpu idle.
Two idle states are defined:
1. Wait-for-interrupt (replacing default kirkwood wfi)
2. Wait-for-interrupt and DDR self refresh

Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
arch/arm/configs/kirkwood_defconfig
arch/arm/mach-kirkwood/Makefile
arch/arm/mach-kirkwood/cpuidle.c [new file with mode: 0644]
arch/arm/mach-kirkwood/include/mach/kirkwood.h

index dcf8153a947dc684114f75150fb3840246a06dec..bde56f4066881ee83d04aa6df56b10319f09bd15 100644 (file)
@@ -270,7 +270,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
index 8f03c9b9bdd99d9ff74a3c5365272601d381f018..f21f35d8386b6bb1263c17dbce7451396bf6decc 100644 (file)
@@ -5,3 +5,5 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)           += rd88f6281-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)          += sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)               += ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE)                 += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644 (file)
index 0000000..f68d33f
--- /dev/null
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES    2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+       .name =         "kirkwood_idle",
+       .owner =        THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+                              struct cpuidle_state *state)
+{
+       struct timeval before, after;
+       int idle_time;
+
+       local_irq_disable();
+       do_gettimeofday(&before);
+       if (state == &dev->states[0])
+               /* Wait for interrupt state */
+               cpu_do_idle();
+       else if (state == &dev->states[1]) {
+               /*
+                * Following write will put DDR in self refresh.
+                * Note that we have 256 cycles before DDR puts it
+                * self in self-refresh, so the wait-for-interrupt
+                * call afterwards won't get the DDR from self refresh
+                * mode.
+                */
+               writel(0x7, DDR_OPERATION_BASE);
+               cpu_do_idle();
+       }
+       do_gettimeofday(&after);
+       local_irq_enable();
+       idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+                       (after.tv_usec - before.tv_usec);
+       return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+       struct cpuidle_device *device;
+
+       cpuidle_register_driver(&kirkwood_idle_driver);
+
+       device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+       device->state_count = KIRKWOOD_MAX_STATES;
+
+       /* Wait for interrupt state */
+       device->states[0].enter = kirkwood_enter_idle;
+       device->states[0].exit_latency = 1;
+       device->states[0].target_residency = 10000;
+       device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+       strcpy(device->states[0].name, "WFI");
+       strcpy(device->states[0].desc, "Wait for interrupt");
+
+       /* Wait for interrupt and DDR self refresh state */
+       device->states[1].enter = kirkwood_enter_idle;
+       device->states[1].exit_latency = 10;
+       device->states[1].target_residency = 10000;
+       device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+       strcpy(device->states[1].name, "DDR SR");
+       strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+       if (cpuidle_register_device(device)) {
+               printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+               return -EIO;
+       }
+       return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
index b3e13958821dc7d275b8d36e6fea7e37852e6d06..f20ff64604855ddc8ba723cf460319bfdee5001e 100644 (file)
@@ -48,6 +48,7 @@
  */
 #define DDR_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE   (DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE     (DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE      (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE      (KIRKWOOD_REGS_VIRT_BASE | 0x10000)