USB: xHCI: override bogus bulk wMaxPacketSize values
authorAlan Stern <stern@rowland.harvard.edu>
Wed, 8 May 2013 15:18:05 +0000 (11:18 -0400)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 15 May 2013 17:41:39 +0000 (13:41 -0400)
This patch shortens the logic in xhci_endpoint_init() by moving common
calculations involving max_packet and max_burst outside the switch
statement, rather than repeating the same code in multiple
case-specific statements.  It also replaces two usages of max_packet
which were clearly intended to be max_burst all along.

More importantly, it compensates for a common bug in high-speed bulk
endpoint descriptors.  In many devices there is a bulk endpoint having
a wMaxPacketSize value smaller than 512, which is forbidden by the USB
spec.  Some xHCI controllers can't handle this and refuse to accept
the endpoint.  This patch changes the max_packet value to 512, which
allows the controller to use the endpoint properly.

In practice the bogus maxpacket size doesn't matter, because none of
the transfers sent via these endpoints are longer than the maxpacket
value anyway.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Aurélien Leblond" <blablack@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci-mem.c

index 965b539bc47410721c9021f41eb7bf051dcc8feb..2cfc465925bd9c8f67ddd8778957d86f6561a43a 100644 (file)
@@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
        ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
 
        /* Set the max packet size and max burst */
+       max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+       max_burst = 0;
        switch (udev->speed) {
        case USB_SPEED_SUPER:
-               max_packet = usb_endpoint_maxp(&ep->desc);
-               ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
                /* dig out max burst from ep companion desc */
-               max_packet = ep->ss_ep_comp.bMaxBurst;
-               ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+               max_burst = ep->ss_ep_comp.bMaxBurst;
                break;
        case USB_SPEED_HIGH:
+               /* Some devices get this wrong */
+               if (usb_endpoint_xfer_bulk(&ep->desc))
+                       max_packet = 512;
                /* bits 11:12 specify the number of additional transaction
                 * opportunities per microframe (USB 2.0, section 9.6.6)
                 */
@@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
                                usb_endpoint_xfer_int(&ep->desc)) {
                        max_burst = (usb_endpoint_maxp(&ep->desc)
                                     & 0x1800) >> 11;
-                       ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
                }
-               /* Fall through */
+               break;
        case USB_SPEED_FULL:
        case USB_SPEED_LOW:
-               max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
-               ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
                break;
        default:
                BUG();
        }
+       ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+                       MAX_BURST(max_burst));
        max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
        ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));