ath9k: Set correct peak detect threshold

The value is different for PCOEM cards and AR955x/AR953x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 374aef1d900875ae38172da913ff0e82c53f9d0c..91130c0e31d376e23591de803741847775201419 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1203,7 +1203,12 @@ static void ar9003_hw_tx_iq_cal_reload(struct ath_hw *ah)
 static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 {
        int offset[8] = {0}, total = 0, test;
-       int agc_out, i;
+       int agc_out, i, peak_detect_threshold;
+
+       if (AR_SREV_9550(ah) || AR_SREV_9531(ah))
+               peak_detect_threshold = 8;
+       else
+               peak_detect_threshold = 0;
 
        /*
         * Turn off LNA/SW.
@@ -1244,13 +1249,15 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
                REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
                              AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
 
-       if (AR_SREV_9003_PCOEM(ah)) {
+       if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
                if (is_2g)
                        REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
-                                     AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, 0x0);
+                                     AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
+                                     peak_detect_threshold);
                else
                        REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
-                                     AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR, 0x0);
+                                     AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR,
+                                     peak_detect_threshold);
        }
 
        for (i = 6; i > 0; i--) {