OMAP3+: VC: cleanup PMIC register address configuration

- support both voltage register address and command register address
  for each VC channel
- add fields for voltage register address (volra) and command register
  address (cmdra) to struct omap_vc_channel
- use VC/VP register access read/modify/write helper
- remove volra_shift field (use __ffs(mask) for shift value)
- I2C addresses 10-bit, change size to u16

Signed-off-by: Kevin Hilman <khilman@ti.com>

diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index d5e792f20f16e6afda61364bed6194f0f89b0d86..22db6e6764d7541c6d2fad66d242ae39680aed76 100644 (file)
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -243,17 +243,24 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 
        /* get PMIC/board specific settings */
        vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr;
+       vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr;
+       vc->cmd_reg_addr = vdd->pmic_info->cmd_reg_addr;
 
        /* Configure the i2c slave address for this VC */
        voltdm->rmw(vc->smps_sa_mask,
                    vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
                    vc->common->smps_sa_reg);
 
-       /* Setup the VOLRA(pmic reg addr) in VC */
-       vc_val = voltdm->read(vc->common->smps_volra_reg);
-       vc_val &= ~vc->smps_volra_mask;
-       vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift;
-       voltdm->write(vc_val, vc->common->smps_volra_reg);
+       /*
+        * Configure the PMIC register addresses.
+        */
+       voltdm->rmw(vc->smps_volra_mask,
+                   vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+                   vc->common->smps_volra_reg);
+       if (vc->cmd_reg_addr)
+               voltdm->rmw(vc->smps_cmdra_mask,
+                           vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
+                           vc->common->smps_cmdra_reg);
 
        /* Configure the setup times */
        vc_val = voltdm->read(vdd->vfsm->voltsetup_reg);

diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 69ca900aff0b92b4ae9e36545d8d89bde88d75e4..43a0c5c2b07a50ab98c02602f1154f457153d8d1 100644 (file)
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -27,6 +27,7 @@ struct voltagedomain;
  * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
  * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
  * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
+ * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
  * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
  * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
  * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
@@ -44,6 +45,7 @@ struct omap_vc_common {
        u32 valid;
        u8 smps_sa_reg;
        u8 smps_volra_reg;
+       u8 smps_cmdra_reg;
        u8 bypass_val_reg;
        u8 data_shift;
        u8 slaveaddr_shift;
@@ -57,24 +59,26 @@ struct omap_vc_common {
 /**
  * struct omap_vc_channel - VC per-instance data
  * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command configuration register address
  * @common: pointer to VC common data for this platform
  * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
  * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
- *
- * XXX It is not necessary to have both a *_mask and a *_shift -
- *     remove one
+ * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
+ * @cmdval_reg: register for on/ret/off voltage level values for this channel
  */
 struct omap_vc_channel {
        /* channel state */
        u16 i2c_slave_addr;
+       u16 volt_reg_addr;
+       u16 cmd_reg_addr;
 
        /* register access data */
        const struct omap_vc_common *common;
        u32 smps_sa_mask;
        u32 smps_volra_mask;
+       u32 smps_cmdra_mask;
        u8 cmdval_reg;
-       u8 smps_volra_shift;
 };
 
 extern struct omap_vc_channel omap3_vc_mpu;

diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 86be50c263ace7425c3c37b209e767c5c3fc28d9..df8bd5ead7e43ad1ac620559cf8bfc6df481ddc5 100644 (file)
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -32,6 +32,7 @@
 static struct omap_vc_common omap3_vc_common = {
        .smps_sa_reg     = OMAP3_PRM_VC_SMPS_SA_OFFSET,
        .smps_volra_reg  = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+       .smps_cmdra_reg  = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
        .bypass_val_reg  = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
        .data_shift      = OMAP3430_DATA_SHIFT,
        .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
@@ -48,14 +49,14 @@ struct omap_vc_channel omap3_vc_mpu = {
        .common = &omap3_vc_common,
        .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
        .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
-       .smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
        .smps_volra_mask = OMAP3430_VOLRA0_MASK,
+       .smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
 };
 
 struct omap_vc_channel omap3_vc_core = {
        .common = &omap3_vc_common,
        .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
        .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
-       .smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
        .smps_volra_mask = OMAP3430_VOLRA1_MASK,
+       .smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
 };

diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index af922b440e9679a212ea39e719718e1bcc0aa128..5d104ff662b32c2fe75405e13cac5a6623209354 100644 (file)
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -33,6 +33,7 @@
 static const struct omap_vc_common omap4_vc_common = {
        .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
        .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+       .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
        .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
        .data_shift = OMAP4430_DATA_SHIFT,
        .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
@@ -50,23 +51,23 @@ struct omap_vc_channel omap4_vc_mpu = {
        .common = &omap4_vc_common,
        .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
        .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
-       .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
        .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
+       .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
 };
 
 struct omap_vc_channel omap4_vc_iva = {
        .common = &omap4_vc_common,
        .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
        .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
-       .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
        .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
+       .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
 };
 
 struct omap_vc_channel omap4_vc_core = {
        .common = &omap4_vc_common,
        .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
        .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
-       .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
        .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
+       .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
 };
 

diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 590384978279de4598e780dcbd32306f28a45ea5..3f49807a36e8af4991bb9db551cc0d7be607b675 100644 (file)
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -103,10 +103,10 @@ struct omap_volt_data {
  * @slew_rate: PMIC slew rate (in uv/us)
  * @step_size: PMIC voltage step size (in uv)
  * @i2c_slave_addr: I2C slave address of PMIC
- * @vsel_to_uv:        PMIC API to convert vsel value to actual voltage in uV.
- * @uv_to_vsel:        PMIC API to convert voltage in uV to vsel value.
  * @volt_reg_addr: voltage configuration register address
  * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @vsel_to_uv:        PMIC API to convert vsel value to actual voltage in uV.
+ * @uv_to_vsel:        PMIC API to convert voltage in uV to vsel value.
  */
 struct omap_volt_pmic_info {
        int slew_rate;
@@ -117,14 +117,14 @@ struct omap_volt_pmic_info {
        u32 off_volt;
        u16 volt_setup_time;
        u16 i2c_slave_addr;
+       u16 volt_reg_addr;
+       u16 cmd_reg_addr;
        u8 vp_erroroffset;
        u8 vp_vstepmin;
        u8 vp_vstepmax;
        u8 vp_vddmin;
        u8 vp_vddmax;
        u8 vp_timeout_us;
-       u8 volt_reg_addr;
-       u8 cmd_reg_addr;
        unsigned long (*vsel_to_uv) (const u8 vsel);
        u8 (*uv_to_vsel) (unsigned long uV);
 };