Add the "ti,gpio-always-on" property to the appropriate GPIO banks to
indicate which banks are always powered and will never lose logic state.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
reg = <0x48018000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x4801a000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x4801c000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x4801e000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x4900c000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x4900e000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x49010000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x49012000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
+ ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
reg = <0x48310000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
reg = <0x4a310000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
reg = <0x4ae10000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;