bnx2x: fix rx checksum validation for IPv6
authorMichal Schmidt <mschmidt@redhat.com>
Thu, 13 Sep 2012 12:59:44 +0000 (12:59 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 18 Sep 2012 20:13:46 +0000 (16:13 -0400)
Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance
regression for IPv6. Rx checksum offload does not work. IPv6 packets
are passed to the stack with CHECKSUM_NONE.

The hardware obviously cannot perform IP checksum validation for IPv6,
because there is no checksum in the IPv6 header. This should not prevent
us from setting CHECKSUM_UNNECESSARY.

Tested on BCM57711.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

index af20c6ee2cd9292dfa41c8693e6d8253dfe667e4..e8e97a7d1d06df9a209c741406af32c19a1313e2 100644 (file)
@@ -662,14 +662,16 @@ void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
                                 struct bnx2x_fastpath *fp,
                                 struct bnx2x_eth_q_stats *qstats)
 {
-       /* Do nothing if no IP/L4 csum validation was done */
-
+       /* Do nothing if no L4 csum validation was done.
+        * We do not check whether IP csum was validated. For IPv4 we assume
+        * that if the card got as far as validating the L4 csum, it also
+        * validated the IP csum. IPv6 has no IP csum.
+        */
        if (cqe->fast_path_cqe.status_flags &
-           (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
-            ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+           ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)
                return;
 
-       /* If both IP/L4 validation were done, check if an error was found. */
+       /* If L4 validation was done, check if an error was found. */
 
        if (cqe->fast_path_cqe.type_error_flags &
            (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |