qlge: Add support for varied pcie function numbers.

Currently we support only PCIe NIC functions zero and one, and FCoE
functions as 3 and 4. Future configurations can mix these up in any
fashion.
This patch removes the 0-1 dependancy and allows usage of any of the 4
functions. We also find the alternate NIC function (if exist) and
determine our port number based on the comparison of the two functions:
Lower function number gets first port, higher function gets second port.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 258ef449ea882a638aff1785cc5e8eb19376bf35..5eb52ca089801f371866f8c5de4733eb2691232f 100644 (file)
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -65,6 +65,17 @@
 
 #define DB_PAGE_SIZE 4096
 
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+       MPI_TEST_FUNC_PORT_CFG = 0x1002,
+       MPI_TEST_NIC1_FUNC_SHIFT = 1,
+       MPI_TEST_NIC2_FUNC_SHIFT = 5,
+       MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+};
+
 /*
  * Processor Address Register (PROC_ADDR) bit definitions.
  */
@@ -1432,6 +1443,8 @@ struct ql_adapter {
        u32 chip_rev_id;
        u32 fw_rev_id;
        u32 func;               /* PCI function for this adapter */
+       u32 alt_func;           /* PCI function for alternate adapter */
+       u32 port;               /* Port number this adapter */
 
        spinlock_t adapter_lock;
        spinlock_t hw_lock;
@@ -1581,6 +1594,7 @@ void ql_mpi_idc_work(struct work_struct *work);
 void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
+int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
 
 #if 1

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index d6517eb5bc1de96772fbd833a8272a18468538c2..5055f5b37a73f2d455ed2c56324aeb4c8cd14e33 100644 (file)
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -680,7 +680,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
        /* Get flash offset for function and adjust
         * for dword access.
         */
-       if (!qdev->func)
+       if (!qdev->port)
                offset = FUNC0_FLASH_OFFSET / sizeof(u32);
        else
                offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -744,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
        /* Second function's parameters follow the first
         * function's.
         */
-       if (qdev->func)
+       if (qdev->port)
                offset = size;
 
        if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -3220,9 +3220,10 @@ static void ql_display_dev_info(struct net_device *ndev)
        struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
        QPRINTK(qdev, PROBE, INFO,
-               "Function #%d, NIC Roll %d, NIC Rev = %d, "
+               "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
                "XG Roll = %d, XG Rev = %d.\n",
                qdev->func,
+               qdev->port,
                qdev->chip_rev_id & 0x0000000f,
                qdev->chip_rev_id >> 4 & 0x0000000f,
                qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3677,12 +3678,53 @@ static struct nic_operations qla8000_nic_ops = {
        .port_initialize        = ql_8000_port_initialize,
 };
 
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
+{
+       int status = 0;
+       u32 temp;
+       u32 nic_func1, nic_func2;
+
+       status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+                       &temp);
+       if (status)
+               return status;
+
+       nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+                       MPI_TEST_NIC_FUNC_MASK);
+       nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+                       MPI_TEST_NIC_FUNC_MASK);
+
+       if (qdev->func == nic_func1)
+               qdev->alt_func = nic_func2;
+       else if (qdev->func == nic_func2)
+               qdev->alt_func = nic_func1;
+       else
+               status = -EIO;
+
+       return status;
+}
 
-static void ql_get_board_info(struct ql_adapter *qdev)
+static int ql_get_board_info(struct ql_adapter *qdev)
 {
+       int status;
        qdev->func =
            (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-       if (qdev->func) {
+       if (qdev->func > 3)
+               return -EIO;
+
+       status = ql_get_alt_pcie_func(qdev);
+       if (status)
+               return status;
+
+       qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+       if (qdev->port) {
                qdev->xg_sem_mask = SEM_XGMAC1_MASK;
                qdev->port_link_up = STS_PL1;
                qdev->port_init = STS_PI1;
@@ -3701,6 +3743,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
                qdev->nic_ops = &qla8012_nic_ops;
        else if (qdev->device_id == QLGE_DEVICE_ID_8000)
                qdev->nic_ops = &qla8000_nic_ops;
+       return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3795,7 +3838,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
        qdev->ndev = ndev;
        qdev->pdev = pdev;
-       ql_get_board_info(qdev);
+       err = ql_get_board_info(qdev);
+       if (err) {
+               dev_err(&pdev->dev, "Register access failed.\n");
+               err = -EIO;
+               goto err_out;
+       }
        qdev->msg_enable = netif_msg_init(debug, default_msg);
        spin_lock_init(&qdev->hw_lock);
        spin_lock_init(&qdev->stats_lock);