Add hotplug support to mcp251x driver

Chip model can now be selected directly by matching the modalias name
(instead of filling the .model field in platform_data), and allows the
module to be auto-loaded. Previous behaviour is of course still supported.

Convert the two in-tree users to this feature (icontrol & zeus).
Tested on an Zeus platform (mcp2515).

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Christian Pellegrin <chripell@fsfe.org>
Cc: Edwin Peer <epeer@tmtservices.co.za>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 771137fc1a82c6a7e276b183940511f7eb3a9641..5ccb0ceff6c4160f153d795b1bbcfcf4e035facb 100644 (file)
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -73,7 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
 
 static struct mcp251x_platform_data mcp251x_info = {
        .oscillator_frequency = 16E6,
-       .model                = CAN_MCP251X_MCP2515,
        .board_specific_setup = NULL,
        .power_enable         = NULL,
        .transceiver_enable   = NULL
@@ -81,7 +80,7 @@ static struct mcp251x_platform_data mcp251x_info = {
 
 static struct spi_board_info mcp251x_board_info[] = {
        {
-               .modalias        = "mcp251x",
+               .modalias        = "mcp2515",
                .max_speed_hz    = 6500000,
                .bus_num         = 3,
                .chip_select     = 0,
@@ -90,7 +89,7 @@ static struct spi_board_info mcp251x_board_info[] = {
                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
        },
        {
-               .modalias        = "mcp251x",
+               .modalias        = "mcp2515",
                .max_speed_hz    = 6500000,
                .bus_num         = 3,
                .chip_select     = 1,
@@ -99,7 +98,7 @@ static struct spi_board_info mcp251x_board_info[] = {
                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
        },
        {
-               .modalias        = "mcp251x",
+               .modalias        = "mcp2515",
                .max_speed_hz    = 6500000,
                .bus_num         = 4,
                .chip_select     = 0,
@@ -108,7 +107,7 @@ static struct spi_board_info mcp251x_board_info[] = {
                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
        },
        {
-               .modalias        = "mcp251x",
+               .modalias        = "mcp2515",
                .max_speed_hz    = 6500000,
                .bus_num         = 4,
                .chip_select     = 1,

diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 39896d88358405821e61c5f6e98774d5f0ce3ee7..dbd256966379f9f66448021f7552374cdd301187 100644 (file)
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -414,15 +414,13 @@ static int zeus_mcp2515_transceiver_enable(int enable)
 
 static struct mcp251x_platform_data zeus_mcp2515_pdata = {
        .oscillator_frequency   = 16*1000*1000,
-       .model                  = CAN_MCP251X_MCP2515,
        .board_specific_setup   = zeus_mcp2515_setup,
-       .transceiver_enable     = zeus_mcp2515_transceiver_enable,
        .power_enable           = zeus_mcp2515_transceiver_enable,
 };
 
 static struct spi_board_info zeus_spi_board_info[] = {
        [0] = {
-               .modalias       = "mcp251x",
+               .modalias       = "mcp2515",
                .platform_data  = &zeus_mcp2515_pdata,
                .irq            = gpio_to_irq(ZEUS_CAN_GPIO),
                .max_speed_hz   = 1*1000*1000,

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index f8cc168ec76cd29db433bee4face5726c11bd43a..f521579f5adbe35735e13986dd920007fb5907ad 100644 (file)
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -922,12 +922,16 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
        struct net_device *net;
        struct mcp251x_priv *priv;
        struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+       int model = spi_get_device_id(spi)->driver_data;
        int ret = -ENODEV;
 
        if (!pdata)
                /* Platform data is required for osc freq */
                goto error_out;
 
+       if (model)
+               pdata->model = model;
+
        /* Allocate can/net device */
        net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
        if (!net) {
@@ -1117,6 +1121,15 @@ static int mcp251x_can_resume(struct spi_device *spi)
 #define mcp251x_can_resume NULL
 #endif
 
+static struct spi_device_id mcp251x_id_table[] = {
+       { "mcp251x",    0 /* Use pdata.model */ },
+       { "mcp2510",    CAN_MCP251X_MCP2510 },
+       { "mcp2515",    CAN_MCP251X_MCP2515 },
+       { },
+};
+
+MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
+
 static struct spi_driver mcp251x_can_driver = {
        .driver = {
                .name = DEVICE_NAME,
@@ -1124,6 +1137,7 @@ static struct spi_driver mcp251x_can_driver = {
                .owner = THIS_MODULE,
        },
 
+       .id_table = mcp251x_id_table,
        .probe = mcp251x_can_probe,
        .remove = __devexit_p(mcp251x_can_remove),
        .suspend = mcp251x_can_suspend,

diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
index 1448177d86d54a4fedc0b74f8f8813408982aa88..dba28268e651931d8b3094438158d15c10d3ca2c 100644 (file)
--- a/include/linux/can/platform/mcp251x.h
+++ b/include/linux/can/platform/mcp251x.h
@@ -26,8 +26,8 @@
 struct mcp251x_platform_data {
        unsigned long oscillator_frequency;
        int model;
-#define CAN_MCP251X_MCP2510 0
-#define CAN_MCP251X_MCP2515 1
+#define CAN_MCP251X_MCP2510 0x2510
+#define CAN_MCP251X_MCP2515 0x2515
        int (*board_specific_setup)(struct spi_device *spi);
        int (*transceiver_enable)(int enable);
        int (*power_enable) (int enable);