USB: storage: don't insert sane sense for SPC3+ when bad sense specified

commit c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream.

Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).

Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 344ec8631481ee41dce9e7242f9063580bae696d..13f2c051dbf26ec7fcad1e930cbaa805e3da768a 100644 (file)
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -251,8 +251,12 @@ static int slave_configure(struct scsi_device *sdev)
                if (!(us->fflags & US_FL_NEEDS_CAP16))
                        sdev->try_rc_10_first = 1;
 
-               /* assume SPC3 or latter devices support sense size > 18 */
-               if (sdev->scsi_level > SCSI_SPC_2)
+               /*
+                * assume SPC3 or latter devices support sense size > 18
+                * unless US_FL_BAD_SENSE quirk is specified.
+                */
+               if (sdev->scsi_level > SCSI_SPC_2 &&
+                   !(us->fflags & US_FL_BAD_SENSE))
                        us->fflags |= US_FL_SANE_SENSE;
 
                /*