[libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA

There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be
set on some conditions, which will lead to many SATA ODD error messages.
commit 55a61604cd1354e1783364e1c901034f2f474b7d is the workaround.
Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn
for SB800.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6dc462105688f2e3736544bf2f379af95b363c8c..7f701cbe14ab83400992c0dd9344705db8f54e68 100644 (file)
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -105,7 +105,7 @@ enum {
        board_ahci_ign_iferr    = 2,
        board_ahci_sb600        = 3,
        board_ahci_mv           = 4,
-       board_ahci_sb700        = 5,
+       board_ahci_sb700        = 5, /* for SB700 and SB800 */
        board_ahci_mcp65        = 6,
        board_ahci_nopmp        = 7,
 
@@ -439,7 +439,7 @@ static const struct ata_port_info ahci_port_info[] = {
                .udma_mask      = ATA_UDMA6,
                .port_ops       = &ahci_ops,
        },
-       /* board_ahci_sb700 */
+       /* board_ahci_sb700, for SB700 and SB800 */
        {
                AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL),
                .flags          = AHCI_FLAG_COMMON,
@@ -2612,6 +2612,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
            (pdev->revision == 0xa1 || pdev->revision == 0xa2))
                hpriv->flags |= AHCI_HFLAG_NO_MSI;
 
+       /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
+       if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
+               hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
+
        if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
                pci_intx(pdev, 1);