ARM: socfpga: add bindings document for fpga bridge drivers

Add bindings documentation for Altera SOCFPGA bridges:
 * fpga2sdram
 * fpga2hps
 * hps2fpga
 * lwhps2fpga

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Matthew Gerlach <mgerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
new file mode 100644 (file)
index 0000000..817a8d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -0,0 +1,16 @@
+Altera FPGA To SDRAM Bridge Driver
+
+Required properties:
+- compatible           : Should contain "altr,socfpga-fpga2sdram-bridge"
+
+Optional properties:
+- bridge-enable                : 0 if driver should disable bridge at startup
+                         1 if driver should enable bridge at startup
+                         Default is to leave bridge in current state.
+
+Example:
+       fpga_bridge3: fpga-bridge@ffc25080 {
+               compatible = "altr,socfpga-fpga2sdram-bridge";
+               reg = <0xffc25080 0x4>;
+               bridge-enable = <0>;
+       };

diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
new file mode 100644 (file)
index 0000000..6406f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -0,0 +1,39 @@
+Altera FPGA/HPS Bridge Driver
+
+Required properties:
+- regs         : base address and size for AXI bridge module
+- compatible   : Should contain one of:
+                 "altr,socfpga-lwhps2fpga-bridge",
+                 "altr,socfpga-hps2fpga-bridge", or
+                 "altr,socfpga-fpga2hps-bridge"
+- resets       : Phandle and reset specifier for this bridge's reset
+- clocks       : Clocks used by this module.
+
+Optional properties:
+- bridge-enable        : 0 if driver should disable bridge at startup.
+                 1 if driver should enable bridge at startup.
+                 Default is to leave bridge in its current state.
+
+Example:
+       fpga_bridge0: fpga-bridge@ff400000 {
+               compatible = "altr,socfpga-lwhps2fpga-bridge";
+               reg = <0xff400000 0x100000>;
+               resets = <&rst LWHPS2FPGA_RESET>;
+               clocks = <&l4_main_clk>;
+               bridge-enable = <0>;
+       };
+
+       fpga_bridge1: fpga-bridge@ff500000 {
+               compatible = "altr,socfpga-hps2fpga-bridge";
+               reg = <0xff500000 0x10000>;
+               resets = <&rst HPS2FPGA_RESET>;
+               clocks = <&l4_main_clk>;
+               bridge-enable = <1>;
+       };
+
+       fpga_bridge2: fpga-bridge@ff600000 {
+               compatible = "altr,socfpga-fpga2hps-bridge";
+               reg = <0xff600000 0x100000>;
+               resets = <&rst FPGA2HPS_RESET>;
+               clocks = <&l4_main_clk>;
+       };