bnx2x: (NPAR) prevent HW access in D3 state

Changing speed setting in NPAR requires HW access, this patch
delays the access to D0 state when performed in D3.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 7897d114b29039ba14e867b06216b7de6f04cc8f..2ac4e3c597fac6e2960d4fbb8b2c080b193692df 100644 (file)
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1211,6 +1211,7 @@ struct bnx2x {
        /* DCBX Negotation results */
        struct dcbx_features                    dcbx_local_feat;
        u32                                     dcbx_error;
+       u32                                     pending_max;
 };
 
 /**

diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 93798129061bbacdfd0141cfe3ac29ca8ad1806d..a71b329405335b4a93c0b55e9fbb45808b7d39e9 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -996,6 +996,23 @@ void bnx2x_free_skbs(struct bnx2x *bp)
        bnx2x_free_rx_skbs(bp);
 }
 
+void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
+{
+       /* load old values */
+       u32 mf_cfg = bp->mf_config[BP_VN(bp)];
+
+       if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
+               /* leave all but MAX value */
+               mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
+
+               /* set new MAX value */
+               mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
+                               & FUNC_MF_CFG_MAX_BW_MASK;
+
+               bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
+       }
+}
+
 static void bnx2x_free_msix_irqs(struct bnx2x *bp)
 {
        int i, offset = 1;
@@ -1464,6 +1481,11 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
        bnx2x_set_eth_mac(bp, 1);
 
+       if (bp->pending_max) {
+               bnx2x_update_max_mf_config(bp, bp->pending_max);
+               bp->pending_max = 0;
+       }
+
        if (bp->port.pmf)
                bnx2x_initial_phy_init(bp, load_mode);
 

diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 326ba44b3ded771f7c8ea7c8ca3347813d2bd9bf..85ea7f26b51f19778e8137d224bd1a245ab9d643 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -341,6 +341,15 @@ void bnx2x_dcbx_init(struct bnx2x *bp);
  */
 int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
 
+/**
+ * Updates MAX part of MF configuration in HW
+ * (if required)
+ *
+ * @param bp
+ * @param value
+ */
+void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
+
 /* dev_close main block */
 int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode);
 

diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index ef2919987a100a687f492ea36b1ef38c29d8e9d4..7e92f9d0dcfdd49cb946bfd5ce112ae15b545af1 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -238,7 +238,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
        speed |= (cmd->speed_hi << 16);
 
        if (IS_MF_SI(bp)) {
-               u32 param = 0, part;
+               u32 part;
                u32 line_speed = bp->link_vars.line_speed;
 
                /* use 10G if no link detected */
@@ -251,24 +251,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                                       REQ_BC_VER_4_SET_MF_BW);
                        return -EINVAL;
                }
+
                part = (speed * 100) / line_speed;
+
                if (line_speed < speed || !part) {
                        BNX2X_DEV_INFO("Speed setting should be in a range "
                                       "from 1%% to 100%% "
                                       "of actual line speed\n");
                        return -EINVAL;
                }
-               /* load old values */
-               param = bp->mf_config[BP_VN(bp)];
 
-               /* leave only MIN value */
-               param &= FUNC_MF_CFG_MIN_BW_MASK;
-
-               /* set new MAX value */
-               param |= (part << FUNC_MF_CFG_MAX_BW_SHIFT)
-                                 & FUNC_MF_CFG_MAX_BW_MASK;
+               if (bp->state != BNX2X_STATE_OPEN)
+                       /* store value for following "load" */
+                       bp->pending_max = part;
+               else
+                       bnx2x_update_max_mf_config(bp, part);
 
-               bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, param);
                return 0;
        }