# that for each of the symbols.
if NETDEVICES
-config COMPAT_NET_DEV_OPS
- default y
- bool "Enable older network device API compatibility"
- ---help---
- This option enables kernel compatibility with older network devices
- that do not use net_device_ops interface.
-
- If unsure, say Y.
-
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
/* max exchange id for FCoE LRO by ddp */
unsigned int fcoe_ddp_xid;
#endif
-
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- struct {
- int (*init)(struct net_device *dev);
- void (*uninit)(struct net_device *dev);
- int (*open)(struct net_device *dev);
- int (*stop)(struct net_device *dev);
- int (*hard_start_xmit) (struct sk_buff *skb,
- struct net_device *dev);
- u16 (*select_queue)(struct net_device *dev,
- struct sk_buff *skb);
- void (*change_rx_flags)(struct net_device *dev,
- int flags);
- void (*set_rx_mode)(struct net_device *dev);
- void (*set_multicast_list)(struct net_device *dev);
- int (*set_mac_address)(struct net_device *dev,
- void *addr);
- int (*validate_addr)(struct net_device *dev);
- int (*do_ioctl)(struct net_device *dev,
- struct ifreq *ifr, int cmd);
- int (*set_config)(struct net_device *dev,
- struct ifmap *map);
- int (*change_mtu)(struct net_device *dev, int new_mtu);
- int (*neigh_setup)(struct net_device *dev,
- struct neigh_parms *);
- void (*tx_timeout) (struct net_device *dev);
- struct net_device_stats* (*get_stats)(struct net_device *dev);
- void (*vlan_rx_register)(struct net_device *dev,
- struct vlan_group *grp);
- void (*vlan_rx_add_vid)(struct net_device *dev,
- unsigned short vid);
- void (*vlan_rx_kill_vid)(struct net_device *dev,
- unsigned short vid);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- void (*poll_controller)(struct net_device *dev);
-#endif
- };
-#endif
};
#define to_net_dev(d) container_of(d, struct net_device, dev)
static void fddi_setup(struct net_device *dev)
{
dev->header_ops = &fddi_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- dev->change_mtu = fddi_change_mtu,
-#endif
-
dev->type = ARPHRD_FDDI;
dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
static void hippi_setup(struct net_device *dev)
{
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- dev->change_mtu = hippi_change_mtu;
- dev->set_mac_address = hippi_mac_addr;
- dev->neigh_setup = hippi_neigh_setup_dev;
-#endif
dev->header_ops = &hippi_header_ops;
/*
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
dev->netdev_ops = &vlan_netdev_ops;
}
- netdev_resync_ops(dev);
if (is_vlan_dev(real_dev))
subclass = 1;
#include <linux/if_arp.h>
#include <linux/if_ltalk.h>
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-static int ltalk_change_mtu(struct net_device *dev, int mtu)
-{
- return -EINVAL;
-}
-#endif
-
static void ltalk_setup(struct net_device *dev)
{
/* Fill in the fields of the device structure with localtalk-generic values. */
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- dev->change_mtu = ltalk_change_mtu;
-#endif
-
dev->type = ARPHRD_LOCALTLK;
dev->hard_header_len = LTALK_HLEN;
dev->mtu = LTALK_MTU;
}
EXPORT_SYMBOL(netdev_fix_features);
-/* Some devices need to (re-)set their netdev_ops inside
- * ->init() or similar. If that happens, we have to setup
- * the compat pointers again.
- */
-void netdev_resync_ops(struct net_device *dev)
-{
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- const struct net_device_ops *ops = dev->netdev_ops;
-
- dev->init = ops->ndo_init;
- dev->uninit = ops->ndo_uninit;
- dev->open = ops->ndo_open;
- dev->change_rx_flags = ops->ndo_change_rx_flags;
- dev->set_rx_mode = ops->ndo_set_rx_mode;
- dev->set_multicast_list = ops->ndo_set_multicast_list;
- dev->set_mac_address = ops->ndo_set_mac_address;
- dev->validate_addr = ops->ndo_validate_addr;
- dev->do_ioctl = ops->ndo_do_ioctl;
- dev->set_config = ops->ndo_set_config;
- dev->change_mtu = ops->ndo_change_mtu;
- dev->neigh_setup = ops->ndo_neigh_setup;
- dev->tx_timeout = ops->ndo_tx_timeout;
- dev->get_stats = ops->ndo_get_stats;
- dev->vlan_rx_register = ops->ndo_vlan_rx_register;
- dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ops->ndo_poll_controller;
-#endif
-#endif
-}
-EXPORT_SYMBOL(netdev_resync_ops);
-
/**
* register_netdevice - register a network device
* @dev: device to register
dev->iflink = -1;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- /* Netdevice_ops API compatibility support.
- * This is temporary until all network devices are converted.
- */
- if (dev->netdev_ops) {
- netdev_resync_ops(dev);
- } else {
- char drivername[64];
- pr_info("%s (%s): not using net_device_ops yet\n",
- dev->name, netdev_drivername(dev, drivername, 64));
-
- /* This works only because net_device_ops and the
- compatibility structure are the same. */
- dev->netdev_ops = (void *) &(dev->init);
- }
-#endif
-
/* Init, if this function is available */
if (dev->netdev_ops->ndo_init) {
ret = dev->netdev_ops->ndo_init(dev);
void ether_setup(struct net_device *dev)
{
dev->header_ops = ð_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- dev->change_mtu = eth_change_mtu;
- dev->set_mac_address = eth_mac_addr;
- dev->validate_addr = eth_validate_addr;
-#endif
dev->type = ARPHRD_ETHER;
dev->hard_header_len = ETH_HLEN;
dev->mtu = ETH_DATA_LEN;