phy: add hix5hd2-sata-phy driver
authorJiancheng Xue <xuejiancheng@huawei.com>
Thu, 3 Jul 2014 14:28:38 +0000 (22:28 +0800)
committerKishon Vijay Abraham I <kishon@ti.com>
Tue, 22 Jul 2014 07:16:10 +0000 (12:46 +0530)
Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc.

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/Kconfig
drivers/phy/Makefile
drivers/phy/phy-hix5hd2-sata.c [new file with mode: 0644]

index 64b98d242ea625b7b29d2b08e0bb2c00e83ddec5..30c82fcbb4928c753392e67961ac2dda4a387cbb 100644 (file)
@@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA
          SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
          port to accept one SATA device.
 
+config PHY_HIX5HD2_SATA
+       tristate "HIX5HD2 SATA PHY Driver"
+       depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+       select GENERIC_PHY
+       select MFD_SYSCON
+       help
+         Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
 config PHY_SUN4I_USB
        tristate "Allwinner sunxi SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
index b4f1d57706015b0af572462627002d7727ec1bac..54f04d04e85d53bc6ec2b686163690561a4aba26 100644 (file)
@@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_USB2)                       += phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)                 += phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)      += phy-exynos5250-sata.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA)         += phy-hix5hd2-sata.o
 obj-$(CONFIG_PHY_SUN4I_USB)            += phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)         += phy-exynos-usb2.o
 phy-exynos-usb2-y                      += phy-samsung-usb2.o
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c
new file mode 100644 (file)
index 0000000..d442834
--- /dev/null
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SATA_PHY0_CTLL         0xa0
+#define MPLL_MULTIPLIER_SHIFT  1
+#define MPLL_MULTIPLIER_MASK   0xfe
+#define MPLL_MULTIPLIER_50M    0x3c
+#define MPLL_MULTIPLIER_100M   0x1e
+#define PHY_RESET              BIT(0)
+#define REF_SSP_EN             BIT(9)
+#define SSC_EN                 BIT(10)
+#define REF_USE_PAD            BIT(23)
+
+#define SATA_PORT_PHYCTL       0x174
+#define SPEED_MODE_MASK                0x6f0000
+#define HALF_RATE_SHIFT                16
+#define PHY_CONFIG_SHIFT       18
+#define GEN2_EN_SHIFT          21
+#define SPEED_CTRL             BIT(20)
+
+#define SATA_PORT_PHYCTL1      0x148
+#define AMPLITUDE_MASK         0x3ffffe
+#define AMPLITUDE_GEN3         0x68
+#define AMPLITUDE_GEN3_SHIFT   15
+#define AMPLITUDE_GEN2         0x56
+#define AMPLITUDE_GEN2_SHIFT   8
+#define AMPLITUDE_GEN1         0x56
+#define AMPLITUDE_GEN1_SHIFT   1
+
+#define SATA_PORT_PHYCTL2      0x14c
+#define PREEMPH_MASK           0x3ffff
+#define PREEMPH_GEN3           0x20
+#define PREEMPH_GEN3_SHIFT     12
+#define PREEMPH_GEN2           0x15
+#define PREEMPH_GEN2_SHIFT     6
+#define PREEMPH_GEN1           0x5
+#define PREEMPH_GEN1_SHIFT     0
+
+struct hix5hd2_priv {
+       void __iomem    *base;
+       struct regmap   *peri_ctrl;
+};
+
+enum phy_speed_mode {
+       SPEED_MODE_GEN1 = 0,
+       SPEED_MODE_GEN2 = 1,
+       SPEED_MODE_GEN3 = 2,
+};
+
+static int hix5hd2_sata_phy_init(struct phy *phy)
+{
+       struct hix5hd2_priv *priv = phy_get_drvdata(phy);
+       u32 val, data[2];
+       int ret;
+
+       if (priv->peri_ctrl) {
+               ret = of_property_read_u32_array(phy->dev.of_node,
+                                                "hisilicon,power-reg",
+                                                &data[0], 2);
+               if (ret) {
+                       dev_err(&phy->dev, "Fail read hisilicon,power-reg\n");
+                       return ret;
+               }
+
+               regmap_update_bits(priv->peri_ctrl, data[0],
+                                  BIT(data[1]), BIT(data[1]));
+       }
+
+       /* reset phy */
+       val = readl_relaxed(priv->base + SATA_PHY0_CTLL);
+       val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD);
+       val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT |
+              REF_SSP_EN | PHY_RESET;
+       writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+       msleep(20);
+       val &= ~PHY_RESET;
+       writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+
+       val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1);
+       val &= ~AMPLITUDE_MASK;
+       val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT |
+              AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT |
+              AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT;
+       writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1);
+
+       val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2);
+       val &= ~PREEMPH_MASK;
+       val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT |
+              PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT |
+              PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT;
+       writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2);
+
+       /* ensure PHYCTRL setting takes effect */
+       val = readl_relaxed(priv->base + SATA_PORT_PHYCTL);
+       val &= ~SPEED_MODE_MASK;
+       val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT |
+              SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT |
+              SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL;
+       writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+       msleep(20);
+       val &= ~SPEED_MODE_MASK;
+       val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT |
+              SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT |
+              SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL;
+       writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+       val &= ~(SPEED_MODE_MASK | SPEED_CTRL);
+       val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT |
+              SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT |
+              SPEED_MODE_GEN2 << GEN2_EN_SHIFT;
+       writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+       return 0;
+}
+
+static struct phy_ops hix5hd2_sata_phy_ops = {
+       .init           = hix5hd2_sata_phy_init,
+       .owner          = THIS_MODULE,
+};
+
+static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
+{
+       struct phy_provider *phy_provider;
+       struct device *dev = &pdev->dev;
+       struct resource *res;
+       struct phy *phy;
+       struct hix5hd2_priv *priv;
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       priv->base = devm_ioremap(dev, res->start, resource_size(res));
+       if (!priv->base)
+               return -ENOMEM;
+
+       priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+                                       "hisilicon,peripheral-syscon");
+       if (IS_ERR(priv->peri_ctrl))
+               priv->peri_ctrl = NULL;
+
+       phy = devm_phy_create(dev, &hix5hd2_sata_phy_ops, NULL);
+       if (IS_ERR(phy)) {
+               dev_err(dev, "failed to create PHY\n");
+               return PTR_ERR(phy);
+       }
+
+       phy_set_drvdata(phy, priv);
+       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+       if (IS_ERR(phy_provider))
+               return PTR_ERR(phy_provider);
+
+       return 0;
+}
+
+static const struct of_device_id hix5hd2_sata_phy_of_match[] = {
+       {.compatible = "hisilicon,hix5hd2-sata-phy",},
+       { },
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match);
+
+static struct platform_driver hix5hd2_sata_phy_driver = {
+       .probe  = hix5hd2_sata_phy_probe,
+       .driver = {
+               .name   = "hix5hd2-sata-phy",
+               .owner  = THIS_MODULE,
+               .of_match_table = hix5hd2_sata_phy_of_match,
+       }
+};
+module_platform_driver(hix5hd2_sata_phy_driver);
+
+MODULE_AUTHOR("Jiancheng Xue <xuejiancheng@huawei.com>");
+MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver");
+MODULE_ALIAS("platform:hix5hd2-sata-phy");
+MODULE_LICENSE("GPL v2");