tg3: Add MDI-X reporting
authorMatt Carlson <mcarlson@broadcom.com>
Mon, 21 Nov 2011 15:01:20 +0000 (15:01 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 22 Nov 2011 21:01:34 +0000 (16:01 -0500)
This patch adds MDI-X state reporting.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/tg3.c
drivers/net/ethernet/broadcom/tg3.h

index 6a25e5860ba56f1d34b847761f6269c780102ff1..0acb279dcf5cd6ff77f2bd3151a88ecb3c675a93 100644 (file)
@@ -3932,6 +3932,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
        current_link_up = 0;
        current_speed = SPEED_INVALID;
        current_duplex = DUPLEX_INVALID;
+       tp->phy_flags &= ~TG3_PHYFLG_MDIX_STATE;
 
        if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) {
                err = tg3_phy_auxctl_read(tp,
@@ -4004,8 +4005,22 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
                }
 
                if (current_link_up == 1 &&
-                   tp->link_config.active_duplex == DUPLEX_FULL)
+                   tp->link_config.active_duplex == DUPLEX_FULL) {
+                       u32 reg, bit;
+
+                       if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
+                               reg = MII_TG3_FET_GEN_STAT;
+                               bit = MII_TG3_FET_GEN_STAT_MDIXSTAT;
+                       } else {
+                               reg = MII_TG3_EXT_STAT;
+                               bit = MII_TG3_EXT_STAT_MDIX;
+                       }
+
+                       if (!tg3_readphy(tp, reg, &val) && (val & bit))
+                               tp->phy_flags |= TG3_PHYFLG_MDIX_STATE;
+
                        tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
+               }
        }
 
 relink:
@@ -10290,9 +10305,16 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
        if (netif_running(dev)) {
                ethtool_cmd_speed_set(cmd, tp->link_config.active_speed);
                cmd->duplex = tp->link_config.active_duplex;
+               if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) {
+                       if (tp->phy_flags & TG3_PHYFLG_MDIX_STATE)
+                               cmd->eth_tp_mdix = ETH_TP_MDI_X;
+                       else
+                               cmd->eth_tp_mdix = ETH_TP_MDI;
+               }
        } else {
                ethtool_cmd_speed_set(cmd, SPEED_INVALID);
                cmd->duplex = DUPLEX_INVALID;
+               cmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
        }
        cmd->phy_address = tp->phy_addr;
        cmd->transceiver = XCVR_INTERNAL;
index 8e2f380f893a6a5635a4ca404fd252c0f441641f..9cc10a868dcdf82acb7d0b9284b0848d4e184e5f 100644 (file)
 #define  MII_TG3_EXT_CTRL_TBI          0x8000
 
 #define MII_TG3_EXT_STAT               0x11 /* Extended status register */
+#define  MII_TG3_EXT_STAT_MDIX         0x2000
 #define  MII_TG3_EXT_STAT_LPASS                0x0100
 
 #define MII_TG3_RXR_COUNTERS           0x14 /* Local/Remote Receiver Counts */
 #define  MII_TG3_FET_PTEST_FRC_TX_LINK 0x1000
 #define  MII_TG3_FET_PTEST_FRC_TX_LOCK 0x0800
 
+#define MII_TG3_FET_GEN_STAT           0x1c
+#define  MII_TG3_FET_GEN_STAT_MDIXSTAT 0x2000
+
 #define MII_TG3_FET_TEST               0x1f
 #define  MII_TG3_FET_SHADOW_EN         0x0080
 
@@ -3135,6 +3139,7 @@ struct tg3 {
 #define TG3_PHYFLG_SERDES_PREEMPHASIS  0x00010000
 #define TG3_PHYFLG_PARALLEL_DETECT     0x00020000
 #define TG3_PHYFLG_EEE_CAP             0x00040000
+#define TG3_PHYFLG_MDIX_STATE          0x00200000
 
        u32                             led_ctrl;
        u32                             phy_otp;