PCI: disable MSI by default on systems with Serverworks HT1000 chips
authorAndy Gospodarek <andy@greyhouse.net>
Fri, 11 May 2007 05:58:57 +0000 (22:58 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 31 May 2007 23:56:36 +0000 (16:56 -0700)
I've been seeing lots of messages like these:

eth0: No interrupt was generated using MSI, switching to INTx mode.  Please
report this failure to the PCI maintainer and include system chipset
information.

On several systems that use the following Severworks HT1000 (also sometimes
labeled as a Broadcom chipset as well) bridge chips.  It doesn't appear MSI
works well (if at all) on these systems.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/quirks.c
include/linux/pci_ids.h

index 1cff65fb9c43d742737508c4e4067d9d5beb36f4..49379821c9d4e8dc6dd28bd9c48b5d0012530cf7 100644 (file)
@@ -1637,6 +1637,7 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev)
        printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
 
index 4712e269d8d3cd836d4d084b7f06bb9272bcf1bc..c4a14c6e8542952d43070c0fe2657d87e4ad10ff 100644 (file)
 #define PCI_DEVICE_ID_SERVERWORKS_LE     0x0009
 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
 #define PCI_DEVICE_ID_SERVERWORKS_EPB    0x0103
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX  0x0104
 #define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE  0x0132
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4   0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5   0x0201