[MIPS] IP28 support

Add support for SGI IP28 machines (Indigo 2 with R10k CPUs)
This work is mainly based on Peter Fuersts work.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 00d6940d4ed7fac02c2fef0a68ff2933e14f9dc0..01740ef7782425262da5679efe3836bb06dcab97 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -127,6 +127,7 @@ config MACH_JAZZ
        select ARCH_MAY_HAVE_PC_FDC
        select CEVT_R4K
        select CSRC_R4K
+       select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
        select GENERIC_ISA_DMA
        select IRQ_CPU
        select I8253
@@ -401,6 +402,7 @@ config SGI_IP22
        select BOOT_ELF32
        select CEVT_R4K
        select CSRC_R4K
+       select DEFAULT_SGI_PARTITION
        select DMA_NONCOHERENT
        select HW_HAS_EISA
        select I8253
@@ -408,6 +410,12 @@ config SGI_IP22
        select IP22_CPU_SCACHE
        select IRQ_CPU
        select GENERIC_ISA_DMA_SUPPORT_BROKEN
+       select SGI_HAS_DS1286
+       select SGI_HAS_I8042
+       select SGI_HAS_INDYDOG
+       select SGI_HAS_SEEQ
+       select SGI_HAS_WD93
+       select SGI_HAS_ZILOG
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_R4X00
        select SYS_HAS_CPU_R5000
@@ -425,6 +433,7 @@ config SGI_IP27
        select ARC
        select ARC64
        select BOOT_ELF64
+       select DEFAULT_SGI_PARTITION
        select DMA_IP27
        select SYS_HAS_EARLY_PRINTK
        select HW_HAS_PCI
@@ -441,6 +450,36 @@ config SGI_IP27
          workstations.  To compile a Linux kernel that runs on these, say Y
          here.
 
+config SGI_IP28
+       bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       select ARC
+       select ARC64
+       select BOOT_ELF64
+       select CEVT_R4K
+       select CSRC_R4K
+       select DEFAULT_SGI_PARTITION
+       select DMA_NONCOHERENT
+       select GENERIC_ISA_DMA_SUPPORT_BROKEN
+       select IRQ_CPU
+       select HW_HAS_EISA
+       select I8253
+       select I8259
+       select SGI_HAS_DS1286
+       select SGI_HAS_I8042
+       select SGI_HAS_INDYDOG
+       select SGI_HAS_SEEQ
+       select SGI_HAS_WD93
+       select SGI_HAS_ZILOG
+       select SWAP_IO_SPACE
+       select SYS_HAS_CPU_R10000
+       select SYS_HAS_EARLY_PRINTK
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+      help
+        This is the SGI Indigo2 with R10000 processor.  To compile a Linux
+        kernel that runs on these, say Y here.
+
 config SGI_IP32
        bool "SGI IP32 (O2)"
        select ARC
@@ -567,6 +606,7 @@ config SNI_RM
        select BOOT_ELF32
        select CEVT_R4K
        select CSRC_R4K
+       select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
        select DMA_NONCOHERENT
        select GENERIC_ISA_DMA
        select HW_HAS_EISA
@@ -939,6 +979,27 @@ config EMMA2RH
 config SERIAL_RM9000
        bool
 
+config SGI_HAS_DS1286
+       bool
+
+config SGI_HAS_INDYDOG
+       bool
+
+config SGI_HAS_SEEQ
+       bool
+
+config SGI_HAS_WD93
+       bool
+
+config SGI_HAS_ZILOG
+       bool
+
+config SGI_HAS_I8042
+       bool
+
+config DEFAULT_SGI_PARTITION
+       bool
+
 config ARC32
        bool
 
@@ -948,7 +1009,7 @@ config BOOT_ELF32
 config MIPS_L1_CACHE_SHIFT
        int
        default "4" if MACH_DECSTATION
-       default "7" if SGI_IP27 || SNI_RM
+       default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
        default "4" if PMC_MSP4200_EVAL
        default "5"
 
@@ -957,7 +1018,7 @@ config HAVE_STD_PC_SERIAL_PORT
 
 config ARC_CONSOLE
        bool "ARC console support"
-       depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN)
+       depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
 
 config ARC_MEMORY
        bool
@@ -966,7 +1027,7 @@ config ARC_MEMORY
 
 config ARC_PROMLIB
        bool
-       depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32
+       depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
        default y
 
 config ARC64

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a49127af33c8d938e5fb3b91869c9316bcbca7f2..dd668f3a8394641b7da69390ed821758c5df076a 100644 (file)
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -478,6 +478,20 @@ OBJCOPYFLAGS                       := --change-addresses=0x57ffffff80000000
 endif
 endif
 
+#
+# SGI IP28 (Indigo2 R10k)
+#
+# Set the load address to >= 0xa800000020080000 if you want to leave space for
+# symmon, 0xa800000020004000 for production kernels ?  Note that the value must
+# be 16kb aligned or the handling of the current variable will break.
+# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
+#
+#core-$(CONFIG_SGI_IP28)               += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+core-$(CONFIG_SGI_IP28)                += arch/mips/sgi-ip22/
+cflags-$(CONFIG_SGI_IP28)      += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
+#cflags-$(CONFIG_SGI_IP28)     += -Iinclude/asm-mips/mach-ip28
+load-$(CONFIG_SGI_IP28)                += 0xa800000020004000
+
 #
 # SGI-IP32 (O2)
 #

diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index e3acb51b70b568abbb8effc1ee80bfbb50badb09..ef1564e40c8d694962a5297eee087c602f14bbbc 100644 (file)
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -3,9 +3,11 @@
 # under Linux.
 #
 
-obj-y  += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \
-          ip22-time.o ip22-nvram.o ip22-platform.o ip22-reset.o ip22-setup.o
+obj-y  += ip22-mc.o ip22-hpc.o ip22-int.o ip22-time.o ip22-nvram.o \
+          ip22-platform.o ip22-reset.o ip22-setup.o
 
+obj-$(CONFIG_SGI_IP22) += ip22-berr.o
+obj-$(CONFIG_SGI_IP28) += ip28-berr.o
 obj-$(CONFIG_EISA)     += ip22-eisa.o
 
-EXTRA_CFLAGS += -Werror
+# EXTRA_CFLAGS += -Werror

diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 01a805dcc67c3896dc32b88c1e6d17dedaabd9ad..3f35d6367becd05b34167c0bea147cca6e5fa5df 100644 (file)
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
  * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - Indigo2 changes
  * Copyright (C) 2003 Ladislav Michl  (ladis@linux-mips.org)
+ * Copyright (C) 2004 Peter Fuerst    (pf@net.alphadv.de) - IP28
  */
 
 #include <linux/init.h>
@@ -137,9 +138,12 @@ void __init sgimc_init(void)
        /* Step 2: Enable all parity checking in cpu control register
         *         zero.
         */
+       /* don't touch parity settings for IP28 */
+#ifndef CONFIG_SGI_IP28
        tmp = sgimc->cpuctrl0;
        tmp |= (SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM |
                SGIMC_CCTRL0_R4KNOCHKPARR);
+#endif
        sgimc->cpuctrl0 = tmp;
 
        /* Step 3: Setup the MC write buffer depth, this is controlled

diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
new file mode 100644 (file)
index 0000000..30e12e2
--- /dev/null
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -0,0 +1,502 @@
+/*
+ * ip28-berr.c: Bus error handling.
+ *
+ * Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org)
+ * Copyright (C) 2005 Peter Fuerst (pf@net.alphadv.de) - IP28
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/branch.h>
+#include <asm/irq_regs.h>
+#include <asm/sgi/mc.h>
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ioc.h>
+#include <asm/sgi/ip22.h>
+#include <asm/r4kcache.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+static unsigned int count_be_is_fixup;
+static unsigned int count_be_handler;
+static unsigned int count_be_interrupt;
+static int debug_be_interrupt;
+
+static unsigned int cpu_err_stat;      /* Status reg for CPU */
+static unsigned int gio_err_stat;      /* Status reg for GIO */
+static unsigned int cpu_err_addr;      /* Error address reg for CPU */
+static unsigned int gio_err_addr;      /* Error address reg for GIO */
+static unsigned int extio_stat;
+static unsigned int hpc3_berr_stat;    /* Bus error interrupt status */
+
+struct hpc3_stat {
+       unsigned long addr;
+       unsigned int ctrl;
+       unsigned int cbp;
+       unsigned int ndptr;
+};
+
+static struct {
+       struct hpc3_stat pbdma[8];
+       struct hpc3_stat scsi[2];
+       struct hpc3_stat ethrx, ethtx;
+} hpc3;
+
+static struct {
+       unsigned long err_addr;
+       struct {
+               u32 lo;
+               u32 hi;
+       } tags[1][2], tagd[4][2], tagi[4][2]; /* Way 0/1 */
+} cache_tags;
+
+static inline void save_cache_tags(unsigned busaddr)
+{
+       unsigned long addr = CAC_BASE | busaddr;
+       int i;
+       cache_tags.err_addr = addr;
+
+       /*
+        * Starting with a bus-address, save secondary cache (indexed by
+        * PA[23..18:7..6]) tags first.
+        */
+       addr &= ~1L;
+#define tag cache_tags.tags[0]
+       cache_op(Index_Load_Tag_S, addr);
+       tag[0].lo = read_c0_taglo();    /* PA[35:18], VA[13:12] */
+       tag[0].hi = read_c0_taghi();    /* PA[39:36] */
+       cache_op(Index_Load_Tag_S, addr | 1L);
+       tag[1].lo = read_c0_taglo();    /* PA[35:18], VA[13:12] */
+       tag[1].hi = read_c0_taghi();    /* PA[39:36] */
+#undef tag
+
+       /*
+        * Save all primary data cache (indexed by VA[13:5]) tags which
+        * might fit to this bus-address, knowing that VA[11:0] == PA[11:0].
+        * Saving all tags and evaluating them later is easier and safer
+        * than relying on VA[13:12] from the secondary cache tags to pick
+        * matching primary tags here already.
+        */
+       addr &= (0xffL << 56) | ((1 << 12) - 1);
+#define tag cache_tags.tagd[i]
+       for (i = 0; i < 4; ++i, addr += (1 << 12)) {
+               cache_op(Index_Load_Tag_D, addr);
+               tag[0].lo = read_c0_taglo();    /* PA[35:12] */
+               tag[0].hi = read_c0_taghi();    /* PA[39:36] */
+               cache_op(Index_Load_Tag_D, addr | 1L);
+               tag[1].lo = read_c0_taglo();    /* PA[35:12] */
+               tag[1].hi = read_c0_taghi();    /* PA[39:36] */
+       }
+#undef tag
+
+       /*
+        * Save primary instruction cache (indexed by VA[13:6]) tags
+        * the same way.
+        */
+       addr &= (0xffL << 56) | ((1 << 12) - 1);
+#define tag cache_tags.tagi[i]
+       for (i = 0; i < 4; ++i, addr += (1 << 12)) {
+               cache_op(Index_Load_Tag_I, addr);
+               tag[0].lo = read_c0_taglo();    /* PA[35:12] */
+               tag[0].hi = read_c0_taghi();    /* PA[39:36] */
+               cache_op(Index_Load_Tag_I, addr | 1L);
+               tag[1].lo = read_c0_taglo();    /* PA[35:12] */
+               tag[1].hi = read_c0_taghi();    /* PA[39:36] */
+       }
+#undef tag
+}
+
+#define GIO_ERRMASK    0xff00
+#define CPU_ERRMASK    0x3f00
+
+static void save_and_clear_buserr(void)
+{
+       int i;
+
+       /* save status registers */
+       cpu_err_addr = sgimc->cerr;
+       cpu_err_stat = sgimc->cstat;
+       gio_err_addr = sgimc->gerr;
+       gio_err_stat = sgimc->gstat;
+       extio_stat = sgioc->extio;
+       hpc3_berr_stat = hpc3c0->bestat;
+
+       hpc3.scsi[0].addr  = (unsigned long)&hpc3c0->scsi_chan0;
+       hpc3.scsi[0].ctrl  = hpc3c0->scsi_chan0.ctrl; /* HPC3_SCTRL_ACTIVE ? */
+       hpc3.scsi[0].cbp   = hpc3c0->scsi_chan0.cbptr;
+       hpc3.scsi[0].ndptr = hpc3c0->scsi_chan0.ndptr;
+
+       hpc3.scsi[1].addr  = (unsigned long)&hpc3c0->scsi_chan1;
+       hpc3.scsi[1].ctrl  = hpc3c0->scsi_chan1.ctrl; /* HPC3_SCTRL_ACTIVE ? */
+       hpc3.scsi[1].cbp   = hpc3c0->scsi_chan1.cbptr;
+       hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr;
+
+       hpc3.ethrx.addr  = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
+       hpc3.ethrx.ctrl  = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
+       hpc3.ethrx.cbp   = hpc3c0->ethregs.rx_cbptr;
+       hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr;
+
+       hpc3.ethtx.addr  = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
+       hpc3.ethtx.ctrl  = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
+       hpc3.ethtx.cbp   = hpc3c0->ethregs.tx_cbptr;
+       hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr;
+
+       for (i = 0; i < 8; ++i) {
+               /* HPC3_PDMACTRL_ISACT ? */
+               hpc3.pbdma[i].addr  = (unsigned long)&hpc3c0->pbdma[i];
+               hpc3.pbdma[i].ctrl  = hpc3c0->pbdma[i].pbdma_ctrl;
+               hpc3.pbdma[i].cbp   = hpc3c0->pbdma[i].pbdma_bptr;
+               hpc3.pbdma[i].ndptr = hpc3c0->pbdma[i].pbdma_dptr;
+       }
+       i = 0;
+       if (gio_err_stat & CPU_ERRMASK)
+               i = gio_err_addr;
+       if (cpu_err_stat & CPU_ERRMASK)
+               i = cpu_err_addr;
+       save_cache_tags(i);
+
+       sgimc->cstat = sgimc->gstat = 0;
+}
+
+static void print_cache_tags(void)
+{
+       u32 scb, scw;
+       int i;
+
+       printk(KERN_ERR "Cache tags @ %08x:\n", (unsigned)cache_tags.err_addr);
+
+       /* PA[31:12] shifted to PTag0 (PA[35:12]) format */
+       scw = (cache_tags.err_addr >> 4) & 0x0fffff00;
+
+       scb = cache_tags.err_addr & ((1 << 12) - 1) & ~((1 << 5) - 1);
+       for (i = 0; i < 4; ++i) { /* for each possible VA[13:12] value */
+               if ((cache_tags.tagd[i][0].lo & 0x0fffff00) != scw &&
+                   (cache_tags.tagd[i][1].lo & 0x0fffff00) != scw)
+                   continue;
+               printk(KERN_ERR
+                      "D: 0: %08x %08x, 1: %08x %08x  (VA[13:5]  %04x)\n",
+                       cache_tags.tagd[i][0].hi, cache_tags.tagd[i][0].lo,
+                       cache_tags.tagd[i][1].hi, cache_tags.tagd[i][1].lo,
+                       scb | (1 << 12)*i);
+       }
+       scb = cache_tags.err_addr & ((1 << 12) - 1) & ~((1 << 6) - 1);
+       for (i = 0; i < 4; ++i) { /* for each possible VA[13:12] value */
+               if ((cache_tags.tagi[i][0].lo & 0x0fffff00) != scw &&
+                   (cache_tags.tagi[i][1].lo & 0x0fffff00) != scw)
+                   continue;
+               printk(KERN_ERR
+                      "I: 0: %08x %08x, 1: %08x %08x  (VA[13:6]  %04x)\n",
+                       cache_tags.tagi[i][0].hi, cache_tags.tagi[i][0].lo,
+                       cache_tags.tagi[i][1].hi, cache_tags.tagi[i][1].lo,
+                       scb | (1 << 12)*i);
+       }
+       i = read_c0_config();
+       scb = i & (1 << 13) ? 7:6;      /* scblksize = 2^[7..6] */
+       scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */
+
+       i = ((1 << scw) - 1) & ~((1 << scb) - 1);
+       printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x  (PA[%u:%u] %05x)\n",
+               cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo,
+               cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo,
+               scw-1, scb, i & (unsigned)cache_tags.err_addr);
+}
+
+static inline const char *cause_excode_text(int cause)
+{
+       static const char *txt[32] =
+       {       "Interrupt",
+               "TLB modification",
+               "TLB (load or instruction fetch)",
+               "TLB (store)",
+               "Address error (load or instruction fetch)",
+               "Address error (store)",
+               "Bus error (instruction fetch)",
+               "Bus error (data: load or store)",
+               "Syscall",
+               "Breakpoint",
+               "Reserved instruction",
+               "Coprocessor unusable",
+               "Arithmetic Overflow",
+               "Trap",
+               "14",
+               "Floating-Point",
+               "16", "17", "18", "19", "20", "21", "22",
+               "Watch Hi/Lo",
+               "24", "25", "26", "27", "28", "29", "30", "31",
+       };
+       return txt[(cause & 0x7c) >> 2];
+}
+
+static void print_buserr(const struct pt_regs *regs)
+{
+       const int field = 2 * sizeof(unsigned long);
+       int error = 0;
+
+       if (extio_stat & EXTIO_MC_BUSERR) {
+               printk(KERN_ERR "MC Bus Error\n");
+               error |= 1;
+       }
+       if (extio_stat & EXTIO_HPC3_BUSERR) {
+               printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
+                       hpc3_berr_stat,
+                       (hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >>
+                                         HPC3_BESTAT_PIDSHIFT,
+                       (hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA",
+                       hpc3_berr_stat & HPC3_BESTAT_BLMASK);
+               error |= 2;
+       }
+       if (extio_stat & EXTIO_EISA_BUSERR) {
+               printk(KERN_ERR "EISA Bus Error\n");
+               error |= 4;
+       }
+       if (cpu_err_stat & CPU_ERRMASK) {
+               printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
+                       cpu_err_stat,
+                       cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "",
+                       cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "",
+                       cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "",
+                       cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "",
+                       cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "",
+                       cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "",
+                       cpu_err_addr);
+               error |= 8;
+       }
+       if (gio_err_stat & GIO_ERRMASK) {
+               printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
+                       gio_err_stat,
+                       gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "",
+                       gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "",
+                       gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "",
+                       gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "",
+                       gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "",
+                       gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "",
+                       gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "",
+                       gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "",
+                       gio_err_addr);
+               error |= 16;
+       }
+       if (!error)
+               printk(KERN_ERR "MC: Hmm, didn't find any error condition.\n");
+       else {
+               printk(KERN_ERR "CP0: config %08x,  "
+                       "MC: cpuctrl0/1: %08x/%05x, giopar: %04x\n"
+                       "MC: cpu/gio_memacc: %08x/%05x, memcfg0/1: %08x/%08x\n",
+                       read_c0_config(),
+                       sgimc->cpuctrl0, sgimc->cpuctrl0, sgimc->giopar,
+                       sgimc->cmacc, sgimc->gmacc,
+                       sgimc->mconfig0, sgimc->mconfig1);
+               print_cache_tags();
+       }
+       printk(KERN_ALERT "%s, epc == %0*lx, ra == %0*lx\n",
+              cause_excode_text(regs->cp0_cause),
+              field, regs->cp0_epc, field, regs->regs[31]);
+}
+
+/*
+ * Check, whether MC's (virtual) DMA address caused the bus error.
+ * See "Virtual DMA Specification", Draft 1.5, Feb 13 1992, SGI
+ */
+
+static int addr_is_ram(unsigned long addr, unsigned sz)
+{
+       int i;
+
+       for (i = 0; i < boot_mem_map.nr_map; i++) {
+               unsigned long a = boot_mem_map.map[i].addr;
+               if (a <= addr && addr+sz <= a+boot_mem_map.map[i].size)
+                       return 1;
+       }
+       return 0;
+}
+
+static int check_microtlb(u32 hi, u32 lo, unsigned long vaddr)
+{
+       /* This is likely rather similar to correct code ;-) */
+
+       vaddr &= 0x7fffffff; /* Doc. states that top bit is ignored */
+
+       /* If tlb-entry is valid and VPN-high (bits [30:21] ?) matches... */
+       if ((lo & 2) && (vaddr >> 21) == ((hi<<1) >> 22)) {
+               u32 ctl = sgimc->dma_ctrl;
+               if (ctl & 1) {
+                       unsigned int pgsz = (ctl & 2) ? 14:12; /* 16k:4k */
+                       /* PTEIndex is VPN-low (bits [22:14]/[20:12] ?) */
+                       unsigned long pte = (lo >> 6) << 12; /* PTEBase */
+                       pte += 8*((vaddr >> pgsz) & 0x1ff);
+                       if (addr_is_ram(pte, 8)) {
+                               /*
+                                * Note: Since DMA hardware does look up
+                                * translation on its own, this PTE *must*
+                                * match the TLB/EntryLo-register format !
+                                */
+                               unsigned long a = *(unsigned long *)
+                                               PHYS_TO_XKSEG_UNCACHED(pte);
+                               a = (a & 0x3f) << 6; /* PFN */
+                               a += vaddr & ((1 << pgsz) - 1);
+                               return (cpu_err_addr == a);
+                       }
+               }
+       }
+       return 0;
+}
+
+static int check_vdma_memaddr(void)
+{
+       if (cpu_err_stat & CPU_ERRMASK) {
+               u32 a = sgimc->maddronly;
+
+               if (!(sgimc->dma_ctrl & 0x100)) /* Xlate-bit clear ? */
+                       return (cpu_err_addr == a);
+
+               if (check_microtlb(sgimc->dtlb_hi0, sgimc->dtlb_lo0, a) ||
+                   check_microtlb(sgimc->dtlb_hi1, sgimc->dtlb_lo1, a) ||
+                   check_microtlb(sgimc->dtlb_hi2, sgimc->dtlb_lo2, a) ||
+                   check_microtlb(sgimc->dtlb_hi3, sgimc->dtlb_lo3, a))
+                       return 1;
+       }
+       return 0;
+}
+
+static int check_vdma_gioaddr(void)
+{
+       if (gio_err_stat & GIO_ERRMASK) {
+               u32 a = sgimc->gio_dma_trans;
+               a = (sgimc->gmaddronly & ~a) | (sgimc->gio_dma_sbits & a);
+               return (gio_err_addr == a);
+       }
+       return 0;
+}
+
+/*
+ * MC sends an interrupt whenever bus or parity errors occur. In addition,
+ * if the error happened during a CPU read, it also asserts the bus error
+ * pin on the R4K. Code in bus error handler save the MC bus error registers
+ * and then clear the interrupt when this happens.
+ */
+
+static int ip28_be_interrupt(const struct pt_regs *regs)
+{
+       int i;
+
+       save_and_clear_buserr();
+       /*
+        * Try to find out, whether we got here by a mispredicted speculative
+        * load/store operation.  If so, it's not fatal, we can go on.
+        */
+       /* Any cause other than "Interrupt" (ExcCode 0) is fatal. */
+       if (regs->cp0_cause & CAUSEF_EXCCODE)
+               goto mips_be_fatal;
+
+       /* Any cause other than "Bus error interrupt" (IP6) is weird. */
+       if ((regs->cp0_cause & CAUSEF_IP6) != CAUSEF_IP6)
+               goto mips_be_fatal;
+
+       if (extio_stat & (EXTIO_HPC3_BUSERR | EXTIO_EISA_BUSERR))
+               goto mips_be_fatal;
+
+       /* Any state other than "Memory bus error" is fatal. */
+       if (cpu_err_stat & CPU_ERRMASK & ~SGIMC_CSTAT_ADDR)
+               goto mips_be_fatal;
+
+       /* GIO errors other than timeouts are fatal */
+       if (gio_err_stat & GIO_ERRMASK & ~SGIMC_GSTAT_TIME)
+               goto mips_be_fatal;
+
+       /*
+        * Now we have an asynchronous bus error, speculatively or DMA caused.
+        * Need to search all DMA descriptors for the error address.
+        */
+       for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) {
+               struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
+               if ((cpu_err_stat & CPU_ERRMASK) &&
+                   (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp))
+                       break;
+               if ((gio_err_stat & GIO_ERRMASK) &&
+                   (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp))
+                       break;
+       }
+       if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) {
+               struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
+               printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:"
+                      " ctl %08x, ndp %08x, cbp %08x\n",
+                      CPHYSADDR(hp->addr), hp->ctrl, hp->ndptr, hp->cbp);
+               goto mips_be_fatal;
+       }
+       /* Check MC's virtual DMA stuff. */
+       if (check_vdma_memaddr()) {
+               printk(KERN_ERR "at GIO DMA: mem address 0x%08x.\n",
+                       sgimc->maddronly);
+               goto mips_be_fatal;
+       }
+       if (check_vdma_gioaddr()) {
+               printk(KERN_ERR "at GIO DMA: gio address 0x%08x.\n",
+                       sgimc->gmaddronly);
+               goto mips_be_fatal;
+       }
+       /* A speculative bus error... */
+       if (debug_be_interrupt) {
+               print_buserr(regs);
+               printk(KERN_ERR "discarded!\n");
+       }
+       return MIPS_BE_DISCARD;
+
+mips_be_fatal:
+       print_buserr(regs);
+       return MIPS_BE_FATAL;
+}
+
+void ip22_be_interrupt(int irq)
+{
+       const struct pt_regs *regs = get_irq_regs();
+
+       count_be_interrupt++;
+
+       if (ip28_be_interrupt(regs) != MIPS_BE_DISCARD) {
+               /* Assume it would be too dangerous to continue ... */
+               die_if_kernel("Oops", regs);
+               force_sig(SIGBUS, current);
+       } else if (debug_be_interrupt)
+               show_regs((struct pt_regs *)regs);
+}
+
+static int ip28_be_handler(struct pt_regs *regs, int is_fixup)
+{
+       /*
+        * We arrive here only in the unusual case of do_be() invocation,
+        * i.e. by a bus error exception without a bus error interrupt.
+        */
+       if (is_fixup) {
+               count_be_is_fixup++;
+               save_and_clear_buserr();
+               return MIPS_BE_FIXUP;
+       }
+       count_be_handler++;
+       return ip28_be_interrupt(regs);
+}
+
+void __init ip22_be_init(void)
+{
+       board_be_handler = ip28_be_handler;
+}
+
+int ip28_show_be_info(struct seq_file *m)
+{
+       seq_printf(m, "IP28 be fixups\t\t: %u\n", count_be_is_fixup);
+       seq_printf(m, "IP28 be interrupts\t: %u\n", count_be_interrupt);
+       seq_printf(m, "IP28 be handler\t\t: %u\n", count_be_handler);
+
+       return 0;
+}
+
+static int __init debug_be_setup(char *str)
+{
+       debug_be_interrupt++;
+       return 1;
+}
+__setup("ip28_debug_be", debug_be_setup);

diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h
index d6a6c21f16db507f7e8f362f63427fdfbd922d43..1353c81065d1808d252d97b339fe34a052cca480 100644 (file)
--- a/include/asm-mips/dma.h
+++ b/include/asm-mips/dma.h
@@ -84,10 +84,9 @@
  * Deskstations or Acer PICA but not the much more versatile DMA logic used
  * for the local devices on Acer PICA or Magnums.
  */
-#ifdef CONFIG_SGI_IP22
-/* Horrible hack to have a correct DMA window on IP22 */
-#include <asm/sgi/mc.h>
-#define MAX_DMA_ADDRESS                (PAGE_OFFSET + SGIMC_SEG0_BADDR + 0x01000000)
+#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
+/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */
+#define MAX_DMA_ADDRESS                PAGE_OFFSET
 #else
 #define MAX_DMA_ADDRESS                (PAGE_OFFSET + 0x01000000)
 #endif

diff --git a/include/asm-mips/mach-ip28/cpu-feature-overrides.h b/include/asm-mips/mach-ip28/cpu-feature-overrides.h
new file mode 100644 (file)
index 0000000..9a53b32
--- /dev/null
+++ b/include/asm-mips/mach-ip28/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ * 6/2004      pf
+ */
+#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP28 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch          1
+#define cpu_has_mips16         0
+#define cpu_has_divec          0
+#define cpu_has_vce            0
+#define cpu_has_cache_cdex_p   0
+#define cpu_has_cache_cdex_s   0
+#define cpu_has_prefetch       1
+#define cpu_has_mcheck         0
+#define cpu_has_ejtag          0
+
+#define cpu_has_llsc           1
+#define cpu_has_vtag_icache    0
+#define cpu_has_dc_aliases     0 /* see probe_pcache() */
+#define cpu_has_ic_fills_f_dc  0
+#define cpu_has_dsp            0
+#define cpu_icache_snoops_remote_store  1
+#define cpu_has_mipsmt         0
+#define cpu_has_userlocal      0
+
+#define cpu_has_nofpuex                0
+#define cpu_has_64bits         1
+
+#define cpu_has_4kex           1
+#define cpu_has_4k_cache       1
+
+#define cpu_has_inclusive_pcaches      1
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 64
+
+#define cpu_has_mips32r1       0
+#define cpu_has_mips32r2       0
+#define cpu_has_mips64r1       0
+#define cpu_has_mips64r2       0
+
+#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */

diff --git a/include/asm-mips/mach-ip28/ds1286.h b/include/asm-mips/mach-ip28/ds1286.h
new file mode 100644 (file)
index 0000000..471bb9a
--- /dev/null
+++ b/include/asm-mips/mach-ip28/ds1286.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_IP28_DS1286_H
+#define __ASM_MACH_IP28_DS1286_H
+#include <asm/mach-ip22/ds1286.h>
+#endif /* __ASM_MACH_IP28_DS1286_H */

diff --git a/include/asm-mips/mach-ip28/spaces.h b/include/asm-mips/mach-ip28/spaces.h
new file mode 100644 (file)
index 0000000..05aabb2
--- /dev/null
+++ b/include/asm-mips/mach-ip28/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ * 2004        pf
+ */
+#ifndef _ASM_MACH_IP28_SPACES_H
+#define _ASM_MACH_IP28_SPACES_H
+
+#define CAC_BASE               0xa800000000000000
+
+#define HIGHMEM_START          (~0UL)
+
+#define PHYS_OFFSET            _AC(0x20000000, UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP28_SPACES_H */

diff --git a/include/asm-mips/mach-ip28/war.h b/include/asm-mips/mach-ip28/war.h
new file mode 100644 (file)
index 0000000..a1baafa
--- /dev/null
+++ b/include/asm-mips/mach-ip28/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP28_WAR_H
+#define __ASM_MIPS_MACH_IP28_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR    0
+#define R4600_V1_HIT_CACHEOP_WAR       0
+#define R4600_V2_HIT_CACHEOP_WAR       0
+#define R5432_CP0_INTERRUPT_WAR                0
+#define BCM1250_M3_WAR                 0
+#define SIBYTE_1956_WAR                        0
+#define MIPS4K_ICACHE_REFILL_WAR       0
+#define MIPS_CACHE_SYNC_WAR            0
+#define TX49XX_ICACHE_INDEX_INV_WAR    0
+#define RM9000_CDEX_SMP_WAR            0
+#define ICACHE_REFILLS_WORKAROUND_WAR  0
+#define R10000_LLSC_WAR                        1
+#define MIPS34K_MISSED_ITLB_WAR                0
+
+#endif /* __ASM_MIPS_MACH_IP28_WAR_H */