status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-width = <1>;
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
- ranges = <3 0 0x10000000 0x00000400>,
+ ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
<7 0 0x2c000000 0x01000000>;
/*
*/
uart@3,0 {
compatible = "ns16550a";
- reg = <3 0 0x100>;
+ reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
bank-width = <2>;
reg-shift = <1>;
reg-io-width = <1>;
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
/* gpio-irq for dma: 26 */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,burst-length = <16>;
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,sync-clk-ps = <0>;
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
+ ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
linux,mtd-name= "hynix,h8kds0un0mer-4em";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
+ ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>;
+ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
nand@0,0 {
linux,mtd-name= "micron,nand";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
<7 0 0x15000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0x1000000>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
pinctrl-names = "default";
pinctrl-0 = <&gpmc_pins>;
- /* gpio-irq for dma: 65 */
-
+ /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
};
&gpmc {
- ranges = <0 0 0x04000000 0x20000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x20000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
ranges = <0 0 0x00000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
ti,nand-ecc-opt = "sw";
&gpmc {
ranges = <0 0 0x10000000 0x08000000>,
- <1 0 0x28000000 0x08000000>,
- <2 0 0x20000000 0x10000000>;
+ <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
+ <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
nor@0,0 {
compatible = "cfi-flash";
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
- reg = <1 0 0x08000000>;
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
- reg = <2 0 0x10000000>;
+ reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;