USB: r8a66597-hcd: fixes some problem

This patch incorporates some updates. Updates include:

 - Fix the problem that control transfer might fail
 - Change from GFP_KERNEL to GFP_ATOMIC
 - Clean up some coding style issue

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a7a7070c6e2ac9d9d8c10d815a0c38e3169775ca..d60f1985320cfc630e107e81bd3c406a4229a083 100644 (file)
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -35,10 +35,8 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 
 #include "../core/hcd.h"
 #include "r8a66597.h"
@@ -54,16 +52,21 @@ static const char hcd_name[] = "r8a66597_hcd";
 /* module parameters */
 static unsigned short clock = XTAL12;
 module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0(default=0)");
+MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
+               "(default=0)");
+
 static unsigned short vif = LDRV;
 module_param(vif, ushort, 0644);
 MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-static unsigned short endian = 0;
+
+static unsigned short endian;
 module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0(default=0)");
+MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
+
 static unsigned short irq_sense = INTL;
 module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0(default=32)");
+MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
+               "(default=32)");
 
 static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
 static int r8a66597_get_frame(struct usb_hcd *hcd);
@@ -308,7 +311,7 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597,
        struct r8a66597_device *dev;
        int usb_address = urb->setup_packet[2]; /* urb->pipe is address 0 */
 
-       dev = kzalloc(sizeof(struct r8a66597_device), GFP_KERNEL);
+       dev = kzalloc(sizeof(struct r8a66597_device), GFP_ATOMIC);
        if (dev == NULL)
                return -ENOMEM;
 
@@ -611,33 +614,33 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
        u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
 
        memset(array, 0, sizeof(array));
-        switch(ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-        case USB_ENDPOINT_XFER_BULK:
+       switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+       case USB_ENDPOINT_XFER_BULK:
                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
                        array[i++] = 4;
                else {
                        array[i++] = 3;
                        array[i++] = 5;
                }
-                break;
-        case USB_ENDPOINT_XFER_INT:
+               break;
+       case USB_ENDPOINT_XFER_INT:
                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
                        array[i++] = 6;
                        array[i++] = 7;
                        array[i++] = 8;
                } else
                        array[i++] = 9;
-                break;
-        case USB_ENDPOINT_XFER_ISOC:
+               break;
+       case USB_ENDPOINT_XFER_ISOC:
                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
                        array[i++] = 2;
                else
                        array[i++] = 1;
-                break;
-        default:
-                err("Illegal type");
-                return 0;
-        }
+               break;
+       default:
+               err("Illegal type");
+               return 0;
+       }
 
        i = 1;
        min = array[0];
@@ -654,7 +657,7 @@ static u16 get_r8a66597_type(__u8 type)
 {
        u16 r8a66597_type;
 
-       switch(type) {
+       switch (type) {
        case USB_ENDPOINT_XFER_BULK:
                r8a66597_type = R8A66597_BULK;
                break;
@@ -874,7 +877,7 @@ static void r8a66597_usb_preconnect(struct r8a66597 *r8a66597, int port)
 {
        r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
                                         | (1 << USB_PORT_FEAT_C_CONNECTION);
-       r8a66597_write(r8a66597, (u16)~DTCH, get_intsts_reg(port));
+       r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
        r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
 }
 
@@ -917,7 +920,7 @@ static void prepare_setup_packet(struct r8a66597 *r8a66597,
 
        r8a66597_write(r8a66597, make_devsel(td->address) | td->maxpacket,
                       DCPMAXP);
-       r8a66597_write(r8a66597, (u16)~(SIGN | SACK), INTSTS1);
+       r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
 
        for (i = 0; i < 4; i++) {
                r8a66597_write(r8a66597, p[i], setup_addr);
@@ -948,19 +951,18 @@ static void prepare_packet_read(struct r8a66597 *r8a66597,
                        pipe_irq_disable(r8a66597, td->pipenum);
                        pipe_setting(r8a66597, td);
                        pipe_stop(r8a66597, td->pipe);
-                       r8a66597_write(r8a66597, (u16)~(1 << td->pipenum),
-                                      BRDYSTS);
+                       r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
 
                        if (td->pipe->pipetre) {
                                r8a66597_write(r8a66597, TRCLR,
-                                               td->pipe->pipetre);
+                                               td->pipe->pipetre);
                                r8a66597_write(r8a66597,
-                                              (urb->transfer_buffer_length
-                                              + td->maxpacket - 1)
-                                              / td->maxpacket,
-                                              td->pipe->pipetrn);
+                                               (urb->transfer_buffer_length
+                                               + td->maxpacket - 1)
+                                               / td->maxpacket,
+                                               td->pipe->pipetrn);
                                r8a66597_bset(r8a66597, TRENB,
-                                             td->pipe->pipetre);
+                                               td->pipe->pipetre);
                        }
 
                        pipe_start(r8a66597, td->pipe);
@@ -991,7 +993,7 @@ static void prepare_packet_write(struct r8a66597 *r8a66597,
                if (td->pipe->pipetre)
                        r8a66597_bclr(r8a66597, TRENB, td->pipe->pipetre);
        }
-       r8a66597_write(r8a66597, (u16)~(1 << td->pipenum), BRDYSTS);
+       r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
 
        fifo_change_from_pipe(r8a66597, td->pipe);
        tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
@@ -1009,21 +1011,21 @@ static void prepare_status_packet(struct r8a66597 *r8a66597,
        struct urb *urb = td->urb;
 
        r8a66597_pipe_toggle(r8a66597, td->pipe, 1);
+       pipe_stop(r8a66597, td->pipe);
 
        if (urb->setup_packet[0] & USB_ENDPOINT_DIR_MASK) {
                r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
                r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
                r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
-               r8a66597_write(r8a66597, BVAL | BCLR, CFIFOCTR);
-               r8a66597_write(r8a66597, (u16)~BEMP0, BEMPSTS);
+               r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+               r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+               r8a66597_write(r8a66597, BVAL, CFIFOCTR);
                enable_irq_empty(r8a66597, 0);
        } else {
                r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
                r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
                r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
                r8a66597_write(r8a66597, BCLR, CFIFOCTR);
-               r8a66597_write(r8a66597, (u16)~BRDY0, BRDYSTS);
-               r8a66597_write(r8a66597, (u16)~BEMP0, BEMPSTS);
                enable_irq_ready(r8a66597, 0);
        }
        enable_irq_nrdy(r8a66597, 0);
@@ -1269,7 +1271,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
 
        /* write fifo */
        if (pipenum > 0)
-               r8a66597_write(r8a66597, (u16)~(1 << pipenum), BEMPSTS);
+               r8a66597_write(r8a66597, ~(1 << pipenum), BEMPSTS);
        if (urb->transfer_buffer) {
                r8a66597_write_fifo(r8a66597, td->pipe->fifoaddr, buf, size);
                if (!usb_pipebulk(urb->pipe) || td->maxpacket != size)
@@ -1362,7 +1364,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597)
 
        mask = r8a66597_read(r8a66597, BRDYSTS)
               & r8a66597_read(r8a66597, BRDYENB);
-       r8a66597_write(r8a66597, (u16)~mask, BRDYSTS);
+       r8a66597_write(r8a66597, ~mask, BRDYSTS);
        if (mask & BRDY0) {
                td = r8a66597_get_td(r8a66597, 0);
                if (td && td->type == USB_PID_IN)
@@ -1397,7 +1399,7 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
 
        mask = r8a66597_read(r8a66597, BEMPSTS)
               & r8a66597_read(r8a66597, BEMPENB);
-       r8a66597_write(r8a66597, (u16)~mask, BEMPSTS);
+       r8a66597_write(r8a66597, ~mask, BEMPSTS);
        if (mask & BEMP0) {
                cfifo_change(r8a66597, 0);
                td = r8a66597_get_td(r8a66597, 0);
@@ -1434,7 +1436,7 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
 
        mask = r8a66597_read(r8a66597, NRDYSTS)
               & r8a66597_read(r8a66597, NRDYENB);
-       r8a66597_write(r8a66597, (u16)~mask, NRDYSTS);
+       r8a66597_write(r8a66597, ~mask, NRDYSTS);
        if (mask & NRDY0) {
                cfifo_change(r8a66597, 0);
                set_urb_error(r8a66597, 0);
@@ -1488,14 +1490,14 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
        mask0 = intsts0 & intenb0 & (BEMP | NRDY | BRDY);
        if (mask2) {
                if (mask2 & ATTCH) {
-                       r8a66597_write(r8a66597, (u16)~ATTCH, INTSTS2);
+                       r8a66597_write(r8a66597, ~ATTCH, INTSTS2);
                        r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
 
                        /* start usb bus sampling */
                        start_root_hub_sampling(r8a66597, 1);
                }
                if (mask2 & DTCH) {
-                       r8a66597_write(r8a66597, (u16)~DTCH, INTSTS2);
+                       r8a66597_write(r8a66597, ~DTCH, INTSTS2);
                        r8a66597_bclr(r8a66597, DTCHE, INTENB2);
                        r8a66597_usb_disconnect(r8a66597, 1);
                }
@@ -1503,24 +1505,24 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 
        if (mask1) {
                if (mask1 & ATTCH) {
-                       r8a66597_write(r8a66597, (u16)~ATTCH, INTSTS1);
+                       r8a66597_write(r8a66597, ~ATTCH, INTSTS1);
                        r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
 
                        /* start usb bus sampling */
                        start_root_hub_sampling(r8a66597, 0);
                }
                if (mask1 & DTCH) {
-                       r8a66597_write(r8a66597, (u16)~DTCH, INTSTS1);
+                       r8a66597_write(r8a66597, ~DTCH, INTSTS1);
                        r8a66597_bclr(r8a66597, DTCHE, INTENB1);
                        r8a66597_usb_disconnect(r8a66597, 0);
                }
                if (mask1 & SIGN) {
-                       r8a66597_write(r8a66597, (u16)~SIGN, INTSTS1);
+                       r8a66597_write(r8a66597, ~SIGN, INTSTS1);
                        set_urb_error(r8a66597, 0);
                        check_next_phase(r8a66597);
                }
                if (mask1 & SACK) {
-                       r8a66597_write(r8a66597, (u16)~SACK, INTSTS1);
+                       r8a66597_write(r8a66597, ~SACK, INTSTS1);
                        check_next_phase(r8a66597);
                }
        }
@@ -1663,13 +1665,9 @@ static int check_pipe_config(struct r8a66597 *r8a66597, struct urb *urb)
 static int r8a66597_start(struct usb_hcd *hcd)
 {
        struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
-       int ret;
 
        hcd->state = HC_STATE_RUNNING;
-       if ((ret = enable_controller(r8a66597)) < 0)
-               return ret;
-
-       return 0;
+       return enable_controller(r8a66597);
 }
 
 static void r8a66597_stop(struct usb_hcd *hcd)
@@ -1696,13 +1694,12 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb)
 
 static struct r8a66597_td *r8a66597_make_td(struct r8a66597 *r8a66597,
                                            struct urb *urb,
-                                           struct usb_host_endpoint *hep,
-                                           gfp_t mem_flags)
+                                           struct usb_host_endpoint *hep)
 {
        struct r8a66597_td *td;
        u16 pipenum;
 
-       td = kzalloc(sizeof(struct r8a66597_td), mem_flags);
+       td = kzalloc(sizeof(struct r8a66597_td), GFP_ATOMIC);
        if (td == NULL)
                return NULL;
 
@@ -1741,7 +1738,8 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
        }
 
        if (!hep->hcpriv) {
-               hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe), mem_flags);
+               hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe),
+                               GFP_ATOMIC);
                if (!hep->hcpriv) {
                        ret = -ENOMEM;
                        goto error;
@@ -1755,7 +1753,7 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
                init_pipe_config(r8a66597, urb);
 
        set_address_zero(r8a66597, urb);
-       td = r8a66597_make_td(r8a66597, urb, hep, mem_flags);
+       td = r8a66597_make_td(r8a66597, urb, hep);
        if (td == NULL) {
                ret = -ENOMEM;
                goto error;

diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 97c2a71ac7a125dd38a4ce245ed2606d8200dfd4..fe9ceb077d9bbddaf38f7dd6998ca73d1bea7b1a 100644 (file)
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -203,14 +203,14 @@
 #define        DTLN            0x0FFF  /* b11-0: FIFO received data length */
 
 /* Interrupt Enable Register 0 */
-#define        VBSE            0x8000  /* b15: VBUS interrupt */
-#define        RSME            0x4000  /* b14: Resume interrupt */
-#define        SOFE            0x2000  /* b13: Frame update interrupt */
-#define        DVSE            0x1000  /* b12: Device state transition interrupt */
-#define        CTRE            0x0800  /* b11: Control transfer stage transition interrupt */
-#define        BEMPE           0x0400  /* b10: Buffer empty interrupt */
-#define        NRDYE           0x0200  /* b9: Buffer not ready interrupt */
-#define        BRDYE           0x0100  /* b8: Buffer ready interrupt */
+#define        VBSE    0x8000  /* b15: VBUS interrupt */
+#define        RSME    0x4000  /* b14: Resume interrupt */
+#define        SOFE    0x2000  /* b13: Frame update interrupt */
+#define        DVSE    0x1000  /* b12: Device state transition interrupt */
+#define        CTRE    0x0800  /* b11: Control transfer stage transition interrupt */
+#define        BEMPE   0x0400  /* b10: Buffer empty interrupt */
+#define        NRDYE   0x0200  /* b9: Buffer not ready interrupt */
+#define        BRDYE   0x0100  /* b8: Buffer ready interrupt */
 
 /* Interrupt Enable Register 1 */
 #define        OVRCRE          0x8000  /* b15: Over-current interrupt */
@@ -268,16 +268,16 @@
 #define          SOF_DISABLE    0x0000   /* SOF OUT Disable */
 
 /* Interrupt Status Register 0 */
-#define        VBINT           0x8000  /* b15: VBUS interrupt */
-#define        RESM            0x4000  /* b14: Resume interrupt */
-#define        SOFR            0x2000  /* b13: SOF frame update interrupt */
-#define        DVST            0x1000  /* b12: Device state transition interrupt */
-#define        CTRT            0x0800  /* b11: Control transfer stage transition interrupt */
-#define        BEMP            0x0400  /* b10: Buffer empty interrupt */
-#define        NRDY            0x0200  /* b9: Buffer not ready interrupt */
-#define        BRDY            0x0100  /* b8: Buffer ready interrupt */
-#define        VBSTS           0x0080  /* b7: VBUS input port */
-#define        DVSQ            0x0070  /* b6-4: Device state */
+#define        VBINT   0x8000  /* b15: VBUS interrupt */
+#define        RESM    0x4000  /* b14: Resume interrupt */
+#define        SOFR    0x2000  /* b13: SOF frame update interrupt */
+#define        DVST    0x1000  /* b12: Device state transition interrupt */
+#define        CTRT    0x0800  /* b11: Control transfer stage transition interrupt */
+#define        BEMP    0x0400  /* b10: Buffer empty interrupt */
+#define        NRDY    0x0200  /* b9: Buffer not ready interrupt */
+#define        BRDY    0x0100  /* b8: Buffer ready interrupt */
+#define        VBSTS   0x0080  /* b7: VBUS input port */
+#define        DVSQ    0x0070  /* b6-4: Device state */
 #define          DS_SPD_CNFG    0x0070   /* Suspend Configured */
 #define          DS_SPD_ADDR    0x0060   /* Suspend Address */
 #define          DS_SPD_DFLT    0x0050   /* Suspend Default */
@@ -315,13 +315,10 @@
 /* Micro Frame Number Register */
 #define        UFRNM           0x0007  /* b2-0: Micro frame number */
 
-/* USB Address / Low Power Status Recovery Register */
-//#define      USBADDR         0x007F  /* b6-0: USB address */
-
 /* Default Control Pipe Maxpacket Size Register */
 /* Pipe Maxpacket Size Register */
-#define        DEVSEL          0xF000  /* b15-14: Device address select */
-#define        MAXP            0x007F  /* b6-0: Maxpacket size of default control pipe */
+#define        DEVSEL  0xF000  /* b15-14: Device address select */
+#define        MAXP    0x007F  /* b6-0: Maxpacket size of default control pipe */
 
 /* Default Control Pipe Control Register */
 #define        BSTS            0x8000  /* b15: Buffer status */
@@ -366,21 +363,21 @@
 #define        MXPS            0x07FF  /* b10-0: Maxpacket size */
 
 /* Pipe Cycle Configuration Register */
-#define        IFIS            0x1000  /* b12: Isochronous in-buffer flush mode select */
-#define        IITV            0x0007  /* b2-0: Isochronous interval */
+#define        IFIS    0x1000  /* b12: Isochronous in-buffer flush mode select */
+#define        IITV    0x0007  /* b2-0: Isochronous interval */
 
 /* Pipex Control Register */
-#define        BSTS            0x8000  /* b15: Buffer status */
-#define        INBUFM          0x4000  /* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define        CSCLR           0x2000  /* b13: complete-split status clear */
-#define        CSSTS           0x1000  /* b12: complete-split status */
-#define        ATREPM          0x0400  /* b10: Auto repeat mode */
-#define        ACLRM           0x0200  /* b9: Out buffer auto clear mode */
-#define        SQCLR           0x0100  /* b8: Sequence toggle bit clear */
-#define        SQSET           0x0080  /* b7: Sequence toggle bit set */
-#define        SQMON           0x0040  /* b6: Sequence toggle bit monitor */
-#define        PBUSY           0x0020  /* b5: pipe busy */
-#define        PID             0x0003  /* b1-0: Response PID */
+#define        BSTS    0x8000  /* b15: Buffer status */
+#define        INBUFM  0x4000  /* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define        CSCLR   0x2000  /* b13: complete-split status clear */
+#define        CSSTS   0x1000  /* b12: complete-split status */
+#define        ATREPM  0x0400  /* b10: Auto repeat mode */
+#define        ACLRM   0x0200  /* b9: Out buffer auto clear mode */
+#define        SQCLR   0x0100  /* b8: Sequence toggle bit clear */
+#define        SQSET   0x0080  /* b7: Sequence toggle bit set */
+#define        SQMON   0x0040  /* b6: Sequence toggle bit monitor */
+#define        PBUSY   0x0020  /* b5: pipe busy */
+#define        PID     0x0003  /* b1-0: Response PID */
 
 /* PIPExTRE */
 #define        TRENB           0x0200  /* b9: Transaction counter enable */
@@ -407,15 +404,15 @@
 #define make_devsel(addr)              (addr << 12)
 
 struct r8a66597_pipe_info {
-        u16 pipenum;
-        u16 address;   /* R8A66597 HCD usb addres */
-        u16 epnum;
-        u16 maxpacket;
-        u16 type;
-        u16 bufnum;
-        u16 buf_bsize;
-        u16 interval;
-        u16 dir_in;
+       u16 pipenum;
+       u16 address;    /* R8A66597 HCD usb addres */
+       u16 epnum;
+       u16 maxpacket;
+       u16 type;
+       u16 bufnum;
+       u16 buf_bsize;
+       u16 interval;
+       u16 dir_in;
 };
 
 struct r8a66597_pipe {