mac80211: configure default wmm params correctly
authorVladimir Koutny <vlado@work.ksp.sk>
Tue, 18 Mar 2008 20:14:07 +0000 (21:14 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 25 Mar 2008 20:41:57 +0000 (16:41 -0400)
Default WMM params have to be set according to beacon/probe response
information prior to authentication (or IBSS start/join); beacon queue
is configured only in IBSS. This does not affect the use of 'real' WMM
params as reported by AP.

Signed-off-by: Vladimir Koutny <vlado@ksp.sk>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
net/mac80211/ieee80211_sta.c

index bf130b6255abce53ad2ea9db4780c3876bb9c232..cf51ca6804dd8ffa2b832a4679314a15faa0ed77 100644 (file)
@@ -220,6 +220,61 @@ static int ecw2cw(int ecw)
        return (1 << ecw) - 1;
 }
 
+
+static void ieee80211_sta_def_wmm_params(struct net_device *dev,
+                                        struct ieee80211_sta_bss *bss,
+                                        int ibss)
+{
+       struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+       struct ieee80211_local *local = sdata->local;
+       int i, have_higher_than_11mbit = 0;
+
+
+       /* cf. IEEE 802.11 9.2.12 */
+       for (i = 0; i < bss->supp_rates_len; i++)
+               if ((bss->supp_rates[i] & 0x7f) * 5 > 110)
+                       have_higher_than_11mbit = 1;
+
+       if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
+           have_higher_than_11mbit)
+               sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
+       else
+               sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
+
+
+       if (local->ops->conf_tx) {
+               struct ieee80211_tx_queue_params qparam;
+               int i;
+
+               memset(&qparam, 0, sizeof(qparam));
+
+               qparam.aifs = 2;
+
+               if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
+                   !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
+                       qparam.cw_min = 31;
+               else
+                       qparam.cw_min = 15;
+
+               qparam.cw_max = 1023;
+               qparam.txop = 0;
+
+               for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++)
+                       local->ops->conf_tx(local_to_hw(local),
+                                          i + IEEE80211_TX_QUEUE_DATA0,
+                                          &qparam);
+
+               if (ibss) {
+                       /* IBSS uses different parameters for Beacon sending */
+                       qparam.cw_min++;
+                       qparam.cw_min *= 2;
+                       qparam.cw_min--;
+                       local->ops->conf_tx(local_to_hw(local),
+                                          IEEE80211_TX_QUEUE_BEACON, &qparam);
+               }
+       }
+}
+
 static void ieee80211_sta_wmm_params(struct net_device *dev,
                                     struct ieee80211_if_sta *ifsta,
                                     u8 *wmm_param, size_t wmm_param_len)
@@ -2302,6 +2357,8 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
                                        rates |= BIT(j);
                }
                ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
+
+               ieee80211_sta_def_wmm_params(dev, bss, 1);
        } while (0);
 
        if (skb) {
@@ -3293,6 +3350,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
                        ieee80211_sta_set_ssid(dev, selected->ssid,
                                               selected->ssid_len);
                ieee80211_sta_set_bssid(dev, selected->bssid);
+               ieee80211_sta_def_wmm_params(dev, selected, 0);
                ieee80211_rx_bss_put(dev, selected);
                ifsta->state = IEEE80211_AUTHENTICATE;
                ieee80211_sta_reset_auth(dev, ifsta);
@@ -3467,43 +3525,10 @@ int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len)
 {
        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
        struct ieee80211_if_sta *ifsta;
-       struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 
        if (len > IEEE80211_MAX_SSID_LEN)
                return -EINVAL;
 
-       /* TODO: This should always be done for IBSS, even if IEEE80211_QOS is
-        * not defined. */
-       if (local->ops->conf_tx) {
-               struct ieee80211_tx_queue_params qparam;
-               int i;
-
-               memset(&qparam, 0, sizeof(qparam));
-
-               qparam.aifs = 2;
-
-               if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
-                   !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
-                       qparam.cw_min = 31;
-               else
-                       qparam.cw_min = 15;
-
-               qparam.cw_max = 1023;
-               qparam.txop = 0;
-
-               for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++)
-                       local->ops->conf_tx(local_to_hw(local),
-                                          i + IEEE80211_TX_QUEUE_DATA0,
-                                          &qparam);
-
-               /* IBSS uses different parameters for Beacon sending */
-               qparam.cw_min++;
-               qparam.cw_min *= 2;
-               qparam.cw_min--;
-               local->ops->conf_tx(local_to_hw(local),
-                                  IEEE80211_TX_QUEUE_BEACON, &qparam);
-       }
-
        ifsta = &sdata->u.sta;
 
        if (ifsta->ssid_len != len || memcmp(ifsta->ssid, ssid, len) != 0)