ARM: at91: drop rm9200dk board support
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Mon, 10 Jun 2013 14:42:25 +0000 (16:42 +0200)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Tue, 18 Jun 2013 08:23:15 +0000 (10:23 +0200)
This board is impossible to found anymore.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/configs/at91rm9200_defconfig
arch/arm/mach-at91/Kconfig.non_dt
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/board-rm9200dk.c [deleted file]

index 8b099349c4b14fa92eb4d94dfcea2c128628567e..75502c4d222cbd0bd2e29a43f42f1d0522e27d9c 100644 (file)
@@ -18,7 +18,6 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 CONFIG_MACH_ONEARM=y
-CONFIG_ARCH_AT91RM9200DK=y
 CONFIG_MACH_AT91RM9200EK=y
 CONFIG_MACH_CSB337=y
 CONFIG_MACH_CSB637=y
index 1a2abd8ed4079f1f179dd2f0e83e51d1894a79d3..3a78bdcd0a435a51b355787276c573718af5ade5 100644 (file)
@@ -62,13 +62,6 @@ config MACH_ONEARM
          Select this if you are using Ajeco's 1ARM Single Board Computer.
          <http://www.ajeco.fi/>
 
-config ARCH_AT91RM9200DK
-       bool "Atmel AT91RM9200-DK Development board"
-       select HAVE_AT91_DATAFLASH_CARD
-       help
-         Select this if you are using Atmel's AT91RM9200-DK Development board.
-         (Discontinued)
-
 config MACH_AT91RM9200EK
        bool "Atmel AT91RM9200-EK Evaluation Kit"
        select HAVE_AT91_DATAFLASH_CARD
index f4a5f7998bd756c550627b89d91a126596e53bc5..07e89b4db7e7ce64add7a46f307c7198b8f3cb83 100644 (file)
@@ -34,7 +34,6 @@ obj-$(CONFIG_ARCH_AT91X40)    += at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)      += board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)        += board-rm9200dk.o
 obj-$(CONFIG_MACH_AT91RM9200EK)        += board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)      += board-csb337.o
 obj-$(CONFIG_MACH_CSB637)      += board-csb637.o
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
deleted file mode 100644 (file)
index 690541b..0000000
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200dk.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-
-
-static void __init dk_init_early(void)
-{
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata dk_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
-       .vbus_pin       = AT91_PIN_PD4,
-       .pullup_pin     = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
-       .irq_pin        = -EINVAL,
-       .det_pin        = AT91_PIN_PB0,
-       .vcc_pin        = -EINVAL,
-       .rst_pin        = AT91_PIN_PC5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct mci_platform_data __initdata dk_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = -EINVAL,
-               .wp_pin         = -EINVAL,
-       },
-};
-#endif
-
-static struct spi_board_info dk_spi_devices[] = {
-       {       /* DataFlash chip */
-               .modalias       = "mtd_dataflash",
-               .chip_select    = 0,
-               .max_speed_hz   = 15 * 1000 * 1000,
-       },
-       {       /* UR6HCPS2-SP40 PS2-to-SPI adapter */
-               .modalias       = "ur6hcps2",
-               .chip_select    = 1,
-               .max_speed_hz   = 250 *  1000,
-       },
-       {       /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
-               .modalias       = "tlv1504",
-               .chip_select    = 2,
-               .max_speed_hz   = 20 * 1000 * 1000,
-       },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-       {       /* DataFlash card */
-               .modalias       = "mtd_dataflash",
-               .chip_select    = 3,
-               .max_speed_hz   = 15 * 1000 * 1000,
-       }
-#endif
-};
-
-static struct i2c_board_info __initdata dk_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("ics1523", 0x26),
-       },
-       {
-               I2C_BOARD_INFO("x9429", 0x28),
-       },
-       {
-               I2C_BOARD_INFO("24c1024", 0x50),
-       }
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
-       {
-               .name   = "NAND Partition 1",
-               .offset = 0,
-               .size   = MTDPART_SIZ_FULL,
-       },
-};
-
-static struct atmel_nand_data __initdata dk_nand_data = {
-       .ale            = 22,
-       .cle            = 21,
-       .det_pin        = AT91_PIN_PB1,
-       .rdy_pin        = AT91_PIN_PC2,
-       .enable_pin     = -EINVAL,
-       .ecc_mode       = NAND_ECC_SOFT,
-       .on_flash_bbt   = 1,
-       .parts          = dk_nand_partition,
-       .num_parts      = ARRAY_SIZE(dk_nand_partition),
-};
-
-#define DK_FLASH_BASE  AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE  SZ_2M
-
-static struct physmap_flash_data dk_flash_data = {
-       .width          = 2,
-};
-
-static struct resource dk_flash_resource = {
-       .start          = DK_FLASH_BASE,
-       .end            = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data  = &dk_flash_data,
-                       },
-       .resource       = &dk_flash_resource,
-       .num_resources  = 1,
-};
-
-static struct gpio_led dk_leds[] = {
-       {
-               .name                   = "led0",
-               .gpio                   = AT91_PIN_PB2,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       }
-};
-
-static void __init dk_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                          | ATMEL_UART_RI);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&dk_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&dk_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&dk_udc_data);
-       at91_set_multi_drive(dk_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
-       /* Compact Flash */
-       at91_add_device_cf(&dk_cf_data);
-       /* I2C */
-       at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
-       /* SPI */
-       at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-       /* DataFlash card */
-       at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
-       /* MMC */
-       at91_set_gpio_output(AT91_PIN_PB7, 1);  /* this MMC card slot can optionally use SPI signaling (CS3). */
-       at91_add_device_mci(0, &dk_mci0_data);
-#endif
-       /* NAND */
-       at91_add_device_nand(&dk_nand_data);
-       /* NOR Flash */
-       platform_device_register(&dk_flash);
-       /* LEDs */
-       at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-       /* VGA */
-//     dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-       /* Maintainer: SAN People/Atmel */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = dk_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = dk_board_init,
-MACHINE_END