[ARM] mmp: support jasper development board

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 91631201e3f5e95c5f08568a96eeb396c738fefb..6ab843eaa35b507b5df31773ecc6fe5a60200b23 100644 (file)
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -47,6 +47,16 @@ config MACH_FLINT
          PXA910-based development board. Since MMP2 is compatible to
          ARMv6 architecture.
 
+config MACH_MARVELL_JASPER
+       bool "Marvell's Jasper Development Platform"
+       select CPU_MMP2
+       help
+         Say 'Y' here if you want to support the Marvell MMP2-base
+         Jasper Development Platform.
+         MMP2-based board can't be co-existed with PXA168-based &
+         PXA910-based development board. Since MMP2 is compatible to
+         ARMv6 architecture.
+
 endmenu
 
 config CPU_PXA168

diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 698cd996cde995415c4504a6ffe1bdb449b461ee..8b66d06739c4d9c02ea1c03e98b1d23548894e8d 100644 (file)
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)    += tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)     += ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)       += flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o

diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644 (file)
index 0000000..cfd4d66
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,80 @@
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+       /* UART1 */
+       GPIO29_UART1_RXD,
+       GPIO30_UART1_TXD,
+
+       /* UART3 */
+       GPIO51_UART3_RXD,
+       GPIO52_UART3_TXD,
+
+       /* DFI */
+       GPIO168_DFI_D0,
+       GPIO167_DFI_D1,
+       GPIO166_DFI_D2,
+       GPIO165_DFI_D3,
+       GPIO107_DFI_D4,
+       GPIO106_DFI_D5,
+       GPIO105_DFI_D6,
+       GPIO104_DFI_D7,
+       GPIO111_DFI_D8,
+       GPIO164_DFI_D9,
+       GPIO163_DFI_D10,
+       GPIO162_DFI_D11,
+       GPIO161_DFI_D12,
+       GPIO110_DFI_D13,
+       GPIO109_DFI_D14,
+       GPIO108_DFI_D15,
+       GPIO143_ND_nCS0,
+       GPIO144_ND_nCS1,
+       GPIO147_ND_nWE,
+       GPIO148_ND_nRE,
+       GPIO150_ND_ALE,
+       GPIO149_ND_CLE,
+       GPIO112_ND_RDY0,
+       GPIO160_ND_RDY1,
+};
+
+static void __init jasper_init(void)
+{
+       mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+       /* on-chip devices */
+       mmp2_add_uart(1);
+       mmp2_add_uart(3);
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+       .phys_io        = APB_PHYS_BASE,
+       .boot_params    = 0x00000100,
+       .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+       .map_io         = pxa_map_io,
+       .init_irq       = mmp2_init_irq,
+       .timer          = &mmp2_timer,
+       .init_machine   = jasper_init,
+MACHINE_END