#include "et1310_mac.h"
/* Prototypes for functions with local scope */
-static int et131x_xcvr_init(struct et131x_adapter *adapter);
+static void et131x_xcvr_init(struct et131x_adapter *etdev);
/**
* PhyMiRead - Read from the PHY through the MII Interface on the MAC
- * @adapter: pointer to our private adapter structure
+ * @etdev: pointer to our private adapter structure
* @xcvrAddr: the address of the transciever
* @xcvrReg: the register to read
* @value: pointer to a 16-bit value in which the value will be stored
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
-int PhyMiRead(struct et131x_adapter *adapter, u8 xcvrAddr,
+int PhyMiRead(struct et131x_adapter *etdev, u8 xcvrAddr,
u8 xcvrReg, u16 *value)
{
- struct _MAC_t __iomem *mac = &adapter->regs->mac;
+ struct _MAC_t __iomem *mac = &etdev->regs->mac;
int status = 0;
u32 delay;
u32 miiAddr;
/* If we hit the max delay, we could not read the register */
if (delay == 50) {
- dev_warn(&adapter->pdev->dev,
+ dev_warn(&etdev->pdev->dev,
"xcvrReg 0x%08x could not be read\n", xcvrReg);
- dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
+ dev_warn(&etdev->pdev->dev, "status is 0x%08x\n",
miiIndicator);
status = -EIO;
/**
* MiWrite - Write to a PHY register through the MII interface of the MAC
- * @adapter: pointer to our private adapter structure
+ * @etdev: pointer to our private adapter structure
* @xcvrReg: the register to read
* @value: 16-bit value to write
*
*
* Return 0 on success, errno on failure (as defined in errno.h)
*/
-int MiWrite(struct et131x_adapter *adapter, u8 xcvrReg, u16 value)
+int MiWrite(struct et131x_adapter *etdev, u8 xcvrReg, u16 value)
{
- struct _MAC_t __iomem *mac = &adapter->regs->mac;
+ struct _MAC_t __iomem *mac = &etdev->regs->mac;
int status = 0;
- u8 xcvrAddr = adapter->Stats.xcvr_addr;
+ u8 xcvrAddr = etdev->Stats.xcvr_addr;
u32 delay;
u32 miiAddr;
u32 miiCmd;
if (delay == 100) {
u16 TempValue;
- dev_warn(&adapter->pdev->dev,
+ dev_warn(&etdev->pdev->dev,
"xcvrReg 0x%08x could not be written", xcvrReg);
- dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
+ dev_warn(&etdev->pdev->dev, "status is 0x%08x\n",
miiIndicator);
- dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
+ dev_warn(&etdev->pdev->dev, "command is 0x%08x\n",
readl(&mac->mii_mgmt_cmd));
- MiRead(adapter, xcvrReg, &TempValue);
+ MiRead(etdev, xcvrReg, &TempValue);
status = -EIO;
}
/**
* et131x_xcvr_find - Find the PHY ID
- * @adapter: pointer to our private adapter structure
+ * @etdev: pointer to our private adapter structure
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
-int et131x_xcvr_find(struct et131x_adapter *adapter)
+int et131x_xcvr_find(struct et131x_adapter *etdev)
{
- int status = -ENODEV;
u8 xcvr_addr;
MI_IDR1_t idr1;
MI_IDR2_t idr2;
/* We need to get xcvr id and address we just get the first one */
for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) {
/* Read the ID from the PHY */
- PhyMiRead(adapter, xcvr_addr,
+ PhyMiRead(etdev, xcvr_addr,
(u8) offsetof(MI_REGS_t, idr1),
&idr1.value);
- PhyMiRead(adapter, xcvr_addr,
+ PhyMiRead(etdev, xcvr_addr,
(u8) offsetof(MI_REGS_t, idr2),
&idr2.value);
xcvr_id = (u32) ((idr1.value << 16) | idr2.value);
- if ((idr1.value != 0) && (idr1.value != 0xffff)) {
- adapter->Stats.xcvr_id = xcvr_id;
- adapter->Stats.xcvr_addr = xcvr_addr;
-
- status = 0;
- break;
+ if (idr1.value != 0 && idr1.value != 0xffff) {
+ etdev->Stats.xcvr_id = xcvr_id;
+ etdev->Stats.xcvr_addr = xcvr_addr;
+ return 0;
}
}
- return status;
-}
-
-/**
- * et131x_setphy_normal - Set PHY for normal operation.
- * @adapter: pointer to our private adapter structure
- *
- * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
- * when going to D3 in WOL mode. Also used during initialization to set the
- * PHY for normal operation.
- */
-int et131x_setphy_normal(struct et131x_adapter *adapter)
-{
- int status;
-
- /* Make sure the PHY is powered up */
- ET1310_PhyPowerDown(adapter, 0);
- status = et131x_xcvr_init(adapter);
- return status;
+ return -ENODEV;
}
void ET1310_PhyReset(struct et131x_adapter *etdev)
MiWrite(etdev, PHY_CONTROL, 0x8000);
}
+/**
+ * ET1310_PhyPowerDown - PHY power control
+ * @etdev: device to control
+ * @down: true for off/false for back on
+ *
+ * one hundred, ten, one thousand megs
+ * How would you like to have your LAN accessed
+ * Can't you see that this code processed
+ * Phy power, phy power..
+ */
+
void ET1310_PhyPowerDown(struct et131x_adapter *etdev, bool down)
{
u16 data;
MiRead(etdev, PHY_CONTROL, &data);
-
- if (down == false) {
- /* Power UP */
- data &= ~0x0800;
- MiWrite(etdev, PHY_CONTROL, data);
- } else {
- /* Power DOWN */
+ data &= ~0x0800; /* Power UP */
+ if (down) /* Power DOWN */
data |= 0x0800;
- MiWrite(etdev, PHY_CONTROL, data);
- }
+ MiWrite(etdev, PHY_CONTROL, data);
}
+/**
+ * ET130_PhyAutoNEg - autonegotiate control
+ * @etdev: device to control
+ * @enabe: autoneg on/off
+ *
+ * Set up the autonegotiation state according to whether we will be
+ * negotiating the state or forcing a speed.
+ */
+
static void ET1310_PhyAutoNeg(struct et131x_adapter *etdev, bool enable)
{
u16 data;
MiRead(etdev, PHY_CONTROL, &data);
-
- if (enable == true) {
- /* Autonegotiation ON */
- data |= 0x1000;
- MiWrite(etdev, PHY_CONTROL, data);
- } else {
- /* Autonegotiation OFF */
- data &= ~0x1000;
- MiWrite(etdev, PHY_CONTROL, data);
- }
+ data &= ~0x1000; /* Autonegotiation OFF */
+ if (enable)
+ data |= 0x1000; /* Autonegotiation ON */
+ MiWrite(etdev, PHY_CONTROL, data);
}
+/**
+ * ET130_PhyDuplexMode - duplex control
+ * @etdev: device to control
+ * @duplex: duplex on/off
+ *
+ * Set up the duplex state on the PHY
+ */
+
static void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, u16 duplex)
{
u16 data;
MiRead(etdev, PHY_CONTROL, &data);
-
- if (duplex == TRUEPHY_DUPLEX_FULL) {
- /* Set Full Duplex */
- data |= 0x100;
- MiWrite(etdev, PHY_CONTROL, data);
- } else {
- /* Set Half Duplex */
- data &= ~0x100;
- MiWrite(etdev, PHY_CONTROL, data);
- }
+ data &= ~0x100; /* Set Half Duplex */
+ if (duplex == TRUEPHY_DUPLEX_FULL)
+ data |= 0x100; /* Set Full Duplex */
+ MiWrite(etdev, PHY_CONTROL, data);
}
+/**
+ * ET130_PhySpeedSelect - speed control
+ * @etdev: device to control
+ * @duplex: duplex on/off
+ *
+ * Set the speed of our PHY.
+ */
+
static void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, u16 speed)
{
u16 data;
+ static const u16 bits[3]={0x0000, 0x2000, 0x0040};
/* Read the PHY control register */
MiRead(etdev, PHY_CONTROL, &data);
-
/* Clear all Speed settings (Bits 6, 13) */
data &= ~0x2040;
-
- /* Reset the speed bits based on user selection */
- switch (speed) {
- case TRUEPHY_SPEED_10MBPS:
- /* Bits already cleared above, do nothing */
- break;
-
- case TRUEPHY_SPEED_100MBPS:
- /* 100M == Set bit 13 */
- data |= 0x2000;
- break;
-
- case TRUEPHY_SPEED_1000MBPS:
- default:
- data |= 0x0040;
- break;
- }
-
/* Write back the new speed */
- MiWrite(etdev, PHY_CONTROL, data);
+ MiWrite(etdev, PHY_CONTROL, data | bits[speed]);
}
+/**
+ * ET1310_PhyLinkStatus - read link state
+ * @etdev: device to read
+ * @link_status: reported link state
+ * @autoneg: reported autonegotiation state (complete/incomplete/disabled)
+ * @linkspeed: returnedlink speed in use
+ * @duplex_mode: reported half/full duplex state
+ * @mdi_mdix: not yet working
+ * @masterslave: report whether we are master or slave
+ * @polarity: link polarity
+ *
+ * I can read your lan like a magazine
+ * I see if your up
+ * I know your link speed
+ * I see all the setting that you'd rather keep
+ */
+
static void ET1310_PhyLinkStatus(struct et131x_adapter *etdev,
u8 *link_status,
u32 *autoneg,
MiRead(etdev, PHY_PHY_STATUS, &vmi_phystatus);
MiRead(etdev, PHY_CONTROL, &control);
- if (link_status) {
- *link_status =
- (unsigned char)((vmi_phystatus & 0x0040) ? 1 : 0);
- }
-
- if (autoneg) {
- *autoneg =
- (control & 0x1000) ? ((vmi_phystatus & 0x0020) ?
+ *link_status = (vmi_phystatus & 0x0040) ? 1 : 0;
+ *autoneg = (control & 0x1000) ? ((vmi_phystatus & 0x0020) ?
TRUEPHY_ANEG_COMPLETE :
TRUEPHY_ANEG_NOT_COMPLETE) :
TRUEPHY_ANEG_DISABLED;
- }
-
- if (linkspeed)
- *linkspeed = (vmi_phystatus & 0x0300) >> 8;
-
- if (duplex_mode)
- *duplex_mode = (vmi_phystatus & 0x0080) >> 7;
-
- if (mdi_mdix)
- /* NOTE: Need to complete this */
- *mdi_mdix = 0;
-
- if (masterslave) {
- *masterslave =
- (is1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER :
- TRUEPHY_CFG_SLAVE;
- }
-
- if (polarity) {
- *polarity =
- (vmi_phystatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED :
- TRUEPHY_POLARITY_NORMAL;
- }
+ *linkspeed = (vmi_phystatus & 0x0300) >> 8;
+ *duplex_mode = (vmi_phystatus & 0x0080) >> 7;
+ /* NOTE: Need to complete this */
+ *mdi_mdix = 0;
+
+ *masterslave = (is1000BaseT & 0x4000) ?
+ TRUEPHY_CFG_MASTER : TRUEPHY_CFG_SLAVE;
+ *polarity = (vmi_phystatus & 0x0400) ?
+ TRUEPHY_POLARITY_INVERTED : TRUEPHY_POLARITY_NORMAL;
}
static void ET1310_PhyAndOrReg(struct et131x_adapter *etdev,
{
u16 reg;
- /* Read the requested register */
MiRead(etdev, regnum, ®);
-
- /* Apply the AND mask */
reg &= andMask;
-
- /* Apply the OR mask */
reg |= orMask;
-
- /* Write the value back to the register */
MiWrite(etdev, regnum, reg);
}
-/* Still used from _mac */
+/* Still used from _mac for BIT_READ */
void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, u16 action,
u16 regnum, u16 bitnum, u8 *value)
{
u16 reg;
- u16 mask = 0;
-
- /* Create a mask to isolate the requested bit */
- mask = 0x0001 << bitnum;
+ u16 mask = 0x0001 << bitnum;
/* Read the requested register */
MiRead(etdev, regnum, ®);
switch (action) {
case TRUEPHY_BIT_READ:
- if (value != NULL)
- *value = (reg & mask) >> bitnum;
+ *value = (reg & mask) >> bitnum;
break;
case TRUEPHY_BIT_SET:
- reg |= mask;
- MiWrite(etdev, regnum, reg);
+ MiWrite(etdev, regnum, reg | mask);
break;
case TRUEPHY_BIT_CLEAR:
- reg &= ~mask;
- MiWrite(etdev, regnum, reg);
+ MiWrite(etdev, regnum, reg & ~mask);
break;
default:
MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, data);
}
-
/**
- * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode.
- * @etdev: pointer to the adapter structure
- *
- * Also sets the MAC so it is syncd up properly
- */
-static void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* First we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Set our advertise values accordingly */
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode.
- * @etdev: pointer to the adapter structure
- *
- * Also sets the MAC so it is syncd up properly
- */
-static void TPAL_SetPhy10FullDuplex(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* First we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Set our advertise values accordingly */
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation
- * @etdev: pointer to the adapter structure
- */
-static void TPAL_SetPhy10Force(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* Disable autoneg */
- ET1310_PhyAutoNeg(etdev, false);
-
- /* Disable all advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Force 10 Mbps */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_10MBPS);
-
- /* Force Full duplex */
- ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode.
- * @etdev: pointer to the adapter structure
- *
- * Also sets the MAC so it is syncd up properly.
- */
-static void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* first we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Set our advertise values accordingly */
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF);
-
- /* Set speed */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode.
- * @etdev: pointer to the adapter structure
- *
- * Also sets the MAC so it is syncd up properly
- */
-static void TPAL_SetPhy100FullDuplex(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* First we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Set our advertise values accordingly */
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation
- * @etdev: pointer to the adapter structure
- */
-static void TPAL_SetPhy100Force(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* Disable autoneg */
- ET1310_PhyAutoNeg(etdev, false);
-
- /* Disable all advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Force 100 Mbps */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
-
- /* Force Full duplex */
- ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
-
- /* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode
- * @etdev: pointer to the adapter structure
+ * et131x_setphy_normal - Set PHY for normal operation.
+ * @etdev: pointer to our private adapter structure
*
- * Also sets the MAC so it is syncd up properly.
- */
-static void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *etdev)
-{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* first we need to turn off all other advertisement */
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* set our advertise values accordingly */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
-
- /* power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
-}
-
-/**
- * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode.
- * @etdev: pointer to the adapter structure
+ * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
+ * when going to D3 in WOL mode. Also used during initialization to set the
+ * PHY for normal operation.
*/
-static void TPAL_SetPhyAutoNeg(struct et131x_adapter *etdev)
+void et131x_setphy_normal(struct et131x_adapter *etdev)
{
- /* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
-
- /* Turn on advertisement of all capabilities */
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH);
-
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH);
-
- if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
- else
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
-
- /* Make sure auto-neg is ON (it is disabled in FORCE modes) */
- ET1310_PhyAutoNeg(etdev, true);
-
- /* Power up PHY */
+ /* Make sure the PHY is powered up */
ET1310_PhyPowerDown(etdev, 0);
+ et131x_xcvr_init(etdev);
}
-
/**
* et131x_xcvr_init - Init the phy if we are setting it into force mode
- * @adapter: pointer to our private adapter structure
+ * @etdev: pointer to our private adapter structure
*
- * Returns 0 on success, errno on failure (as defined in errno.h)
*/
-static int et131x_xcvr_init(struct et131x_adapter *adapter)
+static void et131x_xcvr_init(struct et131x_adapter *etdev)
{
- int status = 0;
MI_IMR_t imr;
MI_ISR_t isr;
MI_LCR2_t lcr2;
/* Zero out the adapter structure variable representing BMSR */
- adapter->Bmsr.value = 0;
-
- MiRead(adapter, (u8) offsetof(MI_REGS_t, isr), &isr.value);
+ etdev->Bmsr.value = 0;
- MiRead(adapter, (u8) offsetof(MI_REGS_t, imr), &imr.value);
+ MiRead(etdev, (u8) offsetof(MI_REGS_t, isr), &isr.value);
+ MiRead(etdev, (u8) offsetof(MI_REGS_t, imr), &imr.value);
/* Set the link status interrupt only. Bad behavior when link status
* and auto neg are set, we run into a nested interrupt problem
imr.bits.link_status = 0x1;
imr.bits.autoneg_status = 0x1;
- MiWrite(adapter, (u8) offsetof(MI_REGS_t, imr), imr.value);
+ MiWrite(etdev, (u8) offsetof(MI_REGS_t, imr), imr.value);
/* Set the LED behavior such that LED 1 indicates speed (off =
* 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
* vendors; The LED behavior is now determined by vendor data in the
* EEPROM. However, the above description is the default.
*/
- if ((adapter->eepromData[1] & 0x4) == 0) {
- MiRead(adapter, (u8) offsetof(MI_REGS_t, lcr2),
+ if ((etdev->eepromData[1] & 0x4) == 0) {
+ MiRead(etdev, (u8) offsetof(MI_REGS_t, lcr2),
&lcr2.value);
- if ((adapter->eepromData[1] & 0x8) == 0)
+ if ((etdev->eepromData[1] & 0x8) == 0)
lcr2.bits.led_tx_rx = 0x3;
else
lcr2.bits.led_tx_rx = 0x4;
lcr2.bits.led_link = 0xa;
- MiWrite(adapter, (u8) offsetof(MI_REGS_t, lcr2),
+ MiWrite(etdev, (u8) offsetof(MI_REGS_t, lcr2),
lcr2.value);
}
/* Determine if we need to go into a force mode and set it */
- if (adapter->AiForceSpeed == 0 && adapter->AiForceDpx == 0) {
- if (adapter->RegistryFlowControl == TxOnly ||
- adapter->RegistryFlowControl == Both)
- ET1310_PhyAccessMiBit(adapter,
+ if (etdev->AiForceSpeed == 0 && etdev->AiForceDpx == 0) {
+ if (etdev->RegistryFlowControl == TxOnly ||
+ etdev->RegistryFlowControl == Both)
+ ET1310_PhyAccessMiBit(etdev,
TRUEPHY_BIT_SET, 4, 11, NULL);
else
- ET1310_PhyAccessMiBit(adapter,
+ ET1310_PhyAccessMiBit(etdev,
TRUEPHY_BIT_CLEAR, 4, 11, NULL);
- if (adapter->RegistryFlowControl == Both)
- ET1310_PhyAccessMiBit(adapter,
+ if (etdev->RegistryFlowControl == Both)
+ ET1310_PhyAccessMiBit(etdev,
TRUEPHY_BIT_SET, 4, 10, NULL);
else
- ET1310_PhyAccessMiBit(adapter,
+ ET1310_PhyAccessMiBit(etdev,
TRUEPHY_BIT_CLEAR, 4, 10, NULL);
/* Set the phy to autonegotiation */
- ET1310_PhyAutoNeg(adapter, true);
+ ET1310_PhyAutoNeg(etdev, true);
/* NOTE - Do we need this? */
- ET1310_PhyAccessMiBit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL);
- return status;
+ ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_SET, 0, 9, NULL);
+ return;
+ }
+
+ ET1310_PhyAutoNeg(etdev, false);
+
+ /* Set to the correct force mode. */
+ if (etdev->AiForceDpx != 1) {
+ if (etdev->RegistryFlowControl == TxOnly ||
+ etdev->RegistryFlowControl == Both)
+ ET1310_PhyAccessMiBit(etdev,
+ TRUEPHY_BIT_SET, 4, 11, NULL);
+ else
+ ET1310_PhyAccessMiBit(etdev,
+ TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+
+ if (etdev->RegistryFlowControl == Both)
+ ET1310_PhyAccessMiBit(etdev,
+ TRUEPHY_BIT_SET, 4, 10, NULL);
+ else
+ ET1310_PhyAccessMiBit(etdev,
+ TRUEPHY_BIT_CLEAR, 4, 10, NULL);
} else {
- ET1310_PhyAutoNeg(adapter, false);
-
- /* Set to the correct force mode. */
- if (adapter->AiForceDpx != 1) {
- if (adapter->RegistryFlowControl == TxOnly ||
- adapter->RegistryFlowControl == Both)
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_SET, 4, 11,
- NULL);
- else
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_CLEAR, 4, 11,
- NULL);
-
- if (adapter->RegistryFlowControl == Both)
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_SET, 4, 10,
- NULL);
- else
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_CLEAR, 4, 10,
- NULL);
+ ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_CLEAR, 4, 10, NULL);
+ ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+ }
+ ET1310_PhyPowerDown(etdev, 1);
+ switch (etdev->AiForceSpeed) {
+ case 10:
+ /* First we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ if (etdev->AiForceDpx == 1) {
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise10BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_HALF);
+ } else if (etdev->AiForceDpx == 2) {
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise10BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_FULL);
} else {
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_CLEAR, 4, 10, NULL);
- ET1310_PhyAccessMiBit(adapter,
- TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+ /* Disable autoneg */
+ ET1310_PhyAutoNeg(etdev, false);
+ /* Disable rest of the advertisements */
+ ET1310_PhyAdvertise10BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_NONE);
+ /* Force 10 Mbps */
+ ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_10MBPS);
+ /* Force Full duplex */
+ ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
}
-
- switch (adapter->AiForceSpeed) {
- case 10:
- if (adapter->AiForceDpx == 1)
- TPAL_SetPhy10HalfDuplex(adapter);
- else if (adapter->AiForceDpx == 2)
- TPAL_SetPhy10FullDuplex(adapter);
- else
- TPAL_SetPhy10Force(adapter);
- break;
- case 100:
- if (adapter->AiForceDpx == 1)
- TPAL_SetPhy100HalfDuplex(adapter);
- else if (adapter->AiForceDpx == 2)
- TPAL_SetPhy100FullDuplex(adapter);
- else
- TPAL_SetPhy100Force(adapter);
- break;
- case 1000:
- TPAL_SetPhy1000FullDuplex(adapter);
- break;
+ break;
+ case 100:
+ /* first we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ if (etdev->AiForceDpx == 1) {
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise100BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_HALF);
+ /* Set speed */
+ ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
+ } else if (etdev->AiForceDpx == 2) {
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise100BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_FULL);
+ } else {
+ /* Disable autoneg */
+ ET1310_PhyAutoNeg(etdev, false);
+ /* Disable other advertisement */
+ ET1310_PhyAdvertise100BaseT(etdev,
+ TRUEPHY_ADV_DUPLEX_NONE);
+ /* Force 100 Mbps */
+ ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
+ /* Force Full duplex */
+ ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
}
-
- return status;
+ break;
+ case 1000:
+ /* first we need to turn off all other advertisement */
+ ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ /* set our advertise values accordingly */
+ ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
+ break;
}
+ ET1310_PhyPowerDown(etdev, 0);
}
void et131x_Mii_check(struct et131x_adapter *etdev,
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff