--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright 2011 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/basic_mmio_gpio.h>
+#include <linux/spi/spi.h>
+
+#include <linux/i2c/pca953x.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/s3c6410.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <mach/gpio-bank-o.h>
+#include <mach/regs-gpio-memport.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <plat/keypad.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1000,
+ .dft_brightness = 600,
+ .pwm_period_ns = 100000, /* about 1kHz */
+};
+
+static struct platform_device crag6410_backlight_device = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &crag6410_backlight_data,
+ },
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+ pr_debug("%s: setting power %d\n", __func__, power);
+
+ if (power) {
+ gpio_set_value(S3C64XX_GPB(0), 1);
+ msleep(1);
+ s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+ } else {
+ gpio_direction_output(S3C64XX_GPF(14), 0);
+ gpio_set_value(S3C64XX_GPB(0), 0);
+ }
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &(struct plat_lcd_data) {
+ .set_power = crag6410_lcd_power_set,
+ },
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .left_margin = 150,
+ .right_margin = 80,
+ .upper_margin = 40,
+ .lower_margin = 5,
+ .hsync_len = 40,
+ .vsync_len = 5,
+ .xres = 640,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .virtual_y = 480 * 2,
+ .virtual_x = 640,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &crag6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_HOME),
+ KEY(0, 2, KEY_VOLUMEDOWN),
+ KEY(0, 3, KEY_HELP),
+ KEY(0, 4, KEY_MENU),
+ KEY(0, 5, KEY_MEDIA),
+ KEY(1, 0, 232),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_LEFT),
+ KEY(1, 3, KEY_UP),
+ KEY(1, 4, KEY_RIGHT),
+ KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+ .keymap = crag6410_keymap,
+ .keymap_size = ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+ .keymap_data = &crag6410_keymap_data,
+ .rows = 2,
+ .cols = 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+ [0] = {
+ .code = KEY_SUSPEND,
+ .gpio = S3C64XX_GPL(10), /* EINT 18 */
+ .type = EV_SW,
+ .wakeup = 1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+ .buttons = crag6410_gpio_keys,
+ .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN5,
+ .end = S3C64XX_PA_XM0CSN5 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN5 + (1 << 8),
+ .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = S3C_EINT(17),
+ .end = S3C_EINT(17),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
+ .resource = crag6410_dm9k_resource,
+ .dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN4 + 1,
+ .end = S3C64XX_PA_XM0CSN4 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device crag6410_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = -1,
+ .resource = crag6410_mmgpio_resource,
+ .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
+ .dev.platform_data = &(struct bgpio_pdata) {
+ .base = -1,
+ },
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_usb_hsotg,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c64xx_device_iis0,
+ &s3c64xx_device_iis1,
+ &samsung_asoc_dma,
+ &samsung_device_keypad,
+ &crag6410_gpio_keydev,
+ &crag6410_dm9k_device,
+ &s3c64xx_device_spi0,
+ &crag6410_mmgpio,
+ &crag6410_lcd_powerdev,
+ &crag6410_backlight_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+ .gpio_base = PCA935X_GPIO_BASE,
+ .irq_base = 0,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm __initdata = {
+ .constraints = {
+ .name = "VDDARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+ .consumer_supplies = vddarm_consumers,
+};
+
+static struct regulator_init_data vddint __initdata = {
+ .constraints = {
+ .name = "VDDINT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+static struct regulator_init_data vddmem __initdata = {
+ .constraints = {
+ .name = "VDDMEM",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddsys __initdata = {
+ .constraints = {
+ .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc __initdata = {
+ .constraints = {
+ .name = "VDDMMC,UH",
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+ .consumer_supplies = vddmmc_consumers,
+};
+
+static struct regulator_init_data vddotgi __initdata = {
+ .constraints = {
+ .name = "VDDOTGi",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddotg __initdata = {
+ .constraints = {
+ .name = "VDDOTG",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddhi __initdata = {
+ .constraints = {
+ .name = "VDDHI",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddadc __initdata = {
+ .constraints = {
+ .name = "VDDADC,VDDDAC",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddmem0 __initdata = {
+ .constraints = {
+ .name = "VDDMEM0",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddpll __initdata = {
+ .constraints = {
+ .name = "VDDPLL",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddlcd __initdata = {
+ .constraints = {
+ .name = "VDDLCD",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddalive __initdata = {
+ .constraints = {
+ .name = "VDDALIVE",
+ .always_on = 1,
+ },
+};
+
+static struct wm831x_status_pdata banff_red_led __initdata = {
+ .name = "banff:red:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led __initdata = {
+ .name = "banff:green:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata __initdata = {
+ .data_irq = S3C_EINT(26),
+};
+
+static __init int crag_pmic_pre_init(struct wm831x *wm831x)
+{
+ /* Touchscreen data IRQ - CMOS, DBVDD, active high*/
+ wm831x_reg_write(wm831x, WM831X_GPIO11_CONTROL,
+ WM831X_GPN_POL | WM831X_GPN_ENA | 0x6);
+
+ /* Touchscreen pen down IRQ - CMOS, DBVDD, active high*/
+ wm831x_reg_write(wm831x, WM831X_GPIO12_CONTROL,
+ WM831X_GPN_POL | WM831X_GPN_ENA | 0x7);
+
+ return 0;
+}
+
+static struct wm831x_pdata crag_pmic_pdata __initdata = {
+ .pre_init = crag_pmic_pre_init,
+
+ .irq_base = BANFF_PMIC_IRQ_BASE,
+ .gpio_base = GPIO_BOARD_START + 8,
+
+ .dcdc = {
+ &vddarm, /* DCDC1 */
+ &vddint, /* DCDC2 */
+ &vddmem, /* DCDC3 */
+ },
+
+ .ldo = {
+ &vddsys, /* LDO1 */
+ &vddmmc, /* LDO2 */
+ NULL, /* LDO3 */
+ &vddotgi, /* LDO4 */
+ &vddotg, /* LDO5 */
+ &vddhi, /* LDO6 */
+ &vddadc, /* LDO7 */
+ &vddmem0, /* LDO8 */
+ &vddpll, /* LDO9 */
+ &vddlcd, /* LDO10 */
+ &vddalive, /* LDO11 */
+ },
+
+ .status = {
+ &banff_green_led,
+ &banff_red_led,
+ },
+
+ .touch = &touch_pdata,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("tca6408", 0x20),
+ .platform_data = &crag6410_pca_data,
+ },
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &crag_pmic_pdata,
+ .irq = S3C_EINT(23),
+ },
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+ .frequency = 400000,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8311", 0x34),
+ .platform_data = &glenfarclas_pmic_pdata,
+ },
+};
+
+static void __init crag6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+
+ /* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C64XX_GPF(11),
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+ /* force card-detected for prototype 0 */
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .cfg_gpio = crag6410_cfg_sdhci0,
+};
+
+static void __init crag6410_machine_init(void)
+{
+ /* Open drain IRQs need pullups */
+ s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+ gpio_request(S3C64XX_GPB(0), "LCD power");
+ gpio_direction_output(S3C64XX_GPB(0), 0);
+
+ gpio_request(S3C64XX_GPF(14), "LCD PWM");
+ gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
+
+ gpio_request(S3C64XX_GPB(1), "SD power");
+ gpio_direction_output(S3C64XX_GPB(1), 0);
+
+ gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+ gpio_direction_output(S3C64XX_GPF(10), 1);
+
+ s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+ s3c_i2c0_set_platdata(&i2c0_pdata);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&crag6410_lcd_pdata);
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+ platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+ s3c_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+ /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = crag6410_map_io,
+ .init_machine = crag6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff