struct notifier_block freq_transition;
};
-/* Function prototypes */
-static void sci_start_tx(struct uart_port *port);
-static void sci_stop_tx(struct uart_port *port);
-static void sci_start_rx(struct uart_port *port);
-
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
pm_runtime_put_sync(sci_port->port.dev);
}
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+}
+
+static void sci_start_tx(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned short ctrl;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 new, scr = serial_port_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | SCSCR_TDRQE;
+ else
+ new = scr & ~SCSCR_TDRQE;
+ if (new != scr)
+ serial_port_out(port, SCSCR, new);
+ }
+
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ dma_submit_error(s->cookie_tx)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ }
+#endif
+
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ }
+}
+
+static void sci_stop_tx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_TDRQE;
+
+ ctrl &= ~SCSCR_TIE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_start_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ ctrl &= ~port_rx_irq_mask(port);
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
{
if (port->type == PORT_SCI) {
return copied;
}
-static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
-{
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- struct uart_port *port = ptr;
- struct sci_port *s = to_sci_port(port);
+static void sci_dma_tx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
- if (s->chan_rx) {
- u16 scr = serial_port_in(port, SCSCR);
- u16 ssr = serial_port_in(port, SCxSR);
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
- /* Disable future Rx interrupts */
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- disable_irq_nosync(irq);
- scr |= SCSCR_RDRQE;
- } else {
- scr &= ~SCSCR_RIE;
- }
- serial_port_out(port, SCSCR, scr);
- /* Clear current interrupt */
- serial_port_out(port, SCxSR,
- ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
- dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
- jiffies, s->rx_timeout);
- mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+ spin_lock_irqsave(&port->lock, flags);
- return IRQ_HANDLED;
- }
-#endif
+ xmit->tail += s->tx_dma_len;
+ xmit->tail &= UART_XMIT_SIZE - 1;
- /* I think sci_receive_chars has to be called irrespective
- * of whether the I_IXOFF is set, otherwise, how is the interrupt
- * to be disabled?
- */
- sci_receive_chars(ptr);
+ port->icount.tx += s->tx_dma_len;
- return IRQ_HANDLED;
-}
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
-static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
-{
- struct uart_port *port = ptr;
- unsigned long flags;
+ if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
+ }
- spin_lock_irqsave(&port->lock, flags);
- sci_transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
-
- return IRQ_HANDLED;
}
-static irqreturn_t sci_er_interrupt(int irq, void *ptr)
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
{
- struct uart_port *port = ptr;
- struct sci_port *s = to_sci_port(port);
+ struct uart_port *port = &s->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
- /* Handle errors */
- if (port->type == PORT_SCI) {
- if (sci_handle_errors(port)) {
- /* discard character in rx buffer */
- serial_port_in(port, SCxSR);
- sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
- }
- } else {
- sci_handle_fifo_overrun(port);
- if (!s->chan_rx)
- sci_receive_chars(ptr);
+ copied = tty_insert_flip_string(tport, buf, count);
+ if (copied < count) {
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
+ count - copied);
+ port->icount.buf_overrun++;
}
- sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
-
- /* Kick the transmission */
- if (!s->chan_tx)
- sci_tx_interrupt(irq, ptr);
+ port->icount.rx += copied;
- return IRQ_HANDLED;
+ return copied;
}
-static irqreturn_t sci_br_interrupt(int irq, void *ptr)
+static int sci_dma_rx_find_active(struct sci_port *s)
{
- struct uart_port *port = ptr;
+ unsigned int i;
- /* Handle BREAKs */
- sci_handle_breaks(port);
- sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ if (s->active_rx == s->cookie_rx[i])
+ return i;
- return IRQ_HANDLED;
+ dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
+ s->active_rx);
+ return -1;
}
-static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
{
- /*
- * Not all ports (such as SCIFA) will support REIE. Rather than
- * special-casing the port type, we check the port initialization
- * IRQ enable mask to see whether the IRQ is desired at all. If
- * it's unset, it's logically inferred that there's no point in
- * testing for it.
- */
- return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_rx = NULL;
+ s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
+ sg_dma_address(&s->sg_rx[0]));
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_rx(port);
}
-static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
+static void sci_dma_rx_complete(void *arg)
{
- unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
- struct uart_port *port = ptr;
- struct sci_port *s = to_sci_port(port);
- irqreturn_t ret = IRQ_NONE;
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+ int active, count = 0;
- ssr_status = serial_port_in(port, SCxSR);
- scr_status = serial_port_in(port, SCSCR);
- if (s->overrun_reg == SCxSR)
- orer_status = ssr_status;
- else {
- if (sci_getreg(port, s->overrun_reg)->size)
- orer_status = serial_port_in(port, s->overrun_reg);
- }
+ dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line,
+ s->active_rx);
- err_enabled = scr_status & port_rx_irq_mask(port);
+ spin_lock_irqsave(&port->lock, flags);
- /* Tx Interrupt */
- if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
- !s->chan_tx)
- ret = sci_tx_interrupt(irq, ptr);
+ active = sci_dma_rx_find_active(s);
+ if (active >= 0)
+ count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
- /*
- * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
- * DR flags
- */
- if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE))
- ret = sci_rx_interrupt(irq, ptr);
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
- /* Error Interrupt */
- if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
- ret = sci_er_interrupt(irq, ptr);
-
- /* Break Interrupt */
- if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
- ret = sci_br_interrupt(irq, ptr);
+ spin_unlock_irqrestore(&port->lock, flags);
- /* Overrun Interrupt */
- if (orer_status & s->overrun_mask) {
- sci_handle_fifo_overrun(port);
- ret = IRQ_HANDLED;
- }
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
- return ret;
+ schedule_work(&s->work_rx);
}
-/*
- * Here we define a transition notifier so that we can update all of our
- * ports' baud rate when the peripheral clock changes.
- */
-static int sci_notifier(struct notifier_block *self,
- unsigned long phase, void *p)
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
{
- struct sci_port *sci_port;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
unsigned long flags;
- sci_port = container_of(self, struct sci_port, freq_transition);
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_tx = NULL;
+ s->cookie_tx = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_tx(port);
+}
- if (phase == CPUFREQ_POSTCHANGE) {
- struct uart_port *port = &sci_port->port;
+static void sci_submit_rx(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_rx;
+ int i;
- spin_lock_irqsave(&port->lock, flags);
- port->uartclk = clk_get_rate(sci_port->iclk);
- spin_unlock_irqrestore(&port->lock, flags);
- }
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+ struct dma_async_tx_descriptor *desc;
- return NOTIFY_OK;
-}
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
-static const struct sci_irq_desc {
- const char *desc;
- irq_handler_t handler;
-} sci_irq_desc[] = {
- /*
- * Split out handlers, the default case.
- */
- [SCIx_ERI_IRQ] = {
- .desc = "rx err",
- .handler = sci_er_interrupt,
- },
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[i] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[i]))
+ goto fail;
- [SCIx_RXI_IRQ] = {
- .desc = "rx full",
- .handler = sci_rx_interrupt,
- },
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
+ s->cookie_rx[i], i);
+ }
- [SCIx_TXI_IRQ] = {
- .desc = "tx empty",
- .handler = sci_tx_interrupt,
- },
+ s->active_rx = s->cookie_rx[0];
- [SCIx_BRI_IRQ] = {
- .desc = "break",
- .handler = sci_br_interrupt,
- },
+ dma_async_issue_pending(chan);
+ return;
- /*
- * Special muxed handler.
- */
- [SCIx_MUX_IRQ] = {
- .desc = "mux",
- .handler = sci_mpxed_interrupt,
- },
-};
+fail:
+ if (i)
+ dmaengine_terminate_all(chan);
+ for (i = 0; i < 2; i++)
+ s->cookie_rx[i] = -EINVAL;
+ s->active_rx = -EINVAL;
+ dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
+ sci_rx_dma_release(s, true);
+}
-static int sci_request_irq(struct sci_port *port)
+static void work_fn_rx(struct work_struct *work)
{
- struct uart_port *up = &port->port;
- int i, j, ret = 0;
+ struct sci_port *s = container_of(work, struct sci_port, work_rx);
+ struct uart_port *port = &s->port;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ int new;
- for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
- const struct sci_irq_desc *desc;
- int irq;
+ spin_lock_irqsave(&port->lock, flags);
+ new = sci_dma_rx_find_active(s);
+ if (new < 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+ }
- if (SCIx_IRQ_IS_MUXED(port)) {
- i = SCIx_MUX_IRQ;
- irq = up->irq;
- } else {
- irq = port->irqs[i];
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status != DMA_COMPLETE) {
+ /* Handle incomplete DMA receive */
+ struct dma_chan *chan = s->chan_rx;
+ unsigned int read;
+ int count;
- /*
- * Certain port types won't support all of the
- * available interrupt sources.
- */
- if (unlikely(irq < 0))
- continue;
+ dmaengine_terminate_all(chan);
+ read = sg_dma_len(&s->sg_rx[new]) - state.residue;
+ dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
+ s->active_rx);
+
+ if (read) {
+ count = sci_dma_rx_push(s, s->rx_buf[new], read);
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
}
- desc = sci_irq_desc + i;
- port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
- dev_name(up->dev), desc->desc);
- if (!port->irqstr[j])
- goto out_nomem;
+ spin_unlock_irqrestore(&port->lock, flags);
- ret = request_irq(irq, desc->handler, up->irqflags,
- port->irqstr[j], port);
- if (unlikely(ret)) {
- dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
- goto out_noirq;
- }
+ sci_submit_rx(s);
+ return;
}
- return 0;
+ desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[new], 1,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
-out_noirq:
- while (--i >= 0)
- free_irq(port->irqs[i], port);
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[new] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[new]))
+ goto fail;
-out_nomem:
- while (--j >= 0)
- kfree(port->irqstr[j]);
+ s->active_rx = s->cookie_rx[!new];
- return ret;
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
+ __func__, s->cookie_rx[new], new, s->active_rx);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+
+fail:
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+ sci_rx_dma_release(s, true);
}
-static void sci_free_irq(struct sci_port *port)
+static void work_fn_tx(struct work_struct *work)
{
- int i;
+ struct sci_port *s = container_of(work, struct sci_port, work_tx);
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ dma_addr_t buf;
/*
- * Intentionally in reverse order so we iterate over the muxed
- * IRQ first.
+ * DMA is idle now.
+ * Port xmit buffer is already mapped, and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer, we have to
+ * transmit till the end, and then the rest. Take the port lock to get a
+ * consistent xmit buffer state.
*/
- for (i = 0; i < SCIx_NR_IRQS; i++) {
- int irq = port->irqs[i];
+ spin_lock_irq(&port->lock);
+ buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+ s->tx_dma_len = min_t(unsigned int,
+ CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+ CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+ spin_unlock_irq(&port->lock);
- /*
- * Certain port types won't support all of the available
- * interrupt sources.
- */
- if (unlikely(irq < 0))
- continue;
+ desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
- free_irq(port->irqs[i], port);
- kfree(port->irqstr[i]);
+ dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
+ DMA_TO_DEVICE);
- if (SCIx_IRQ_IS_MUXED(port)) {
- /* If there's only one IRQ, we're done. */
- return;
- }
+ spin_lock_irq(&port->lock);
+ desc->callback = sci_dma_tx_complete;
+ desc->callback_param = s;
+ spin_unlock_irq(&port->lock);
+ s->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_tx)) {
+ dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
}
-}
-static unsigned int sci_tx_empty(struct uart_port *port)
-{
- unsigned short status = serial_port_in(port, SCxSR);
- unsigned short in_tx_fifo = sci_txfill(port);
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
- return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+ dma_async_issue_pending(chan);
}
-/*
- * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
- * CTS/RTS is supported in hardware by at least one port and controlled
- * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
- * handled via the ->init_pins() op, which is a bit of a one-way street,
- * lacking any ability to defer pin control -- this will later be
- * converted over to the GPIO framework).
- *
- * Other modes (such as loopback) are supported generically on certain
- * port types, but not others. For these it's sufficient to test for the
- * existence of the support register and simply ignore the port type.
- */
-static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+static bool filter(struct dma_chan *chan, void *slave)
{
- if (mctrl & TIOCM_LOOP) {
- const struct plat_sci_reg *reg;
+ struct sh_dmae_slave *param = slave;
- /*
- * Standard loopback mode for SCFCR ports.
- */
- reg = sci_getreg(port, SCFCR);
- if (reg->size)
- serial_port_out(port, SCFCR,
- serial_port_in(port, SCFCR) |
- SCFCR_LOOP);
- }
+ dev_dbg(chan->device->dev, "%s: slave ID %d\n",
+ __func__, param->shdma_slave.slave_id);
+
+ chan->private = ¶m->shdma_slave;
+ return true;
}
-static unsigned int sci_get_mctrl(struct uart_port *port)
+static void rx_timer_fn(unsigned long arg)
{
- /*
- * CTS/RTS is handled in hardware when supported, while nothing
- * else is wired up. Keep it simple and simply assert DSR/CAR.
- */
- return TIOCM_DSR | TIOCM_CAR;
+ struct sci_port *s = (struct sci_port *)arg;
+ struct uart_port *port = &s->port;
+ u16 scr = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+ dev_dbg(port->dev, "DMA Rx timed out\n");
+ schedule_work(&s->work_rx);
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static void sci_dma_tx_complete(void *arg)
+static void sci_request_dma(struct uart_port *port)
{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long flags;
+ struct sci_port *s = to_sci_port(port);
+ struct sh_dmae_slave *param;
+ struct dma_chan *chan;
+ dma_cap_mask_t mask;
- dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
- spin_lock_irqsave(&port->lock, flags);
+ if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
+ return;
- xmit->tail += s->tx_dma_len;
- xmit->tail &= UART_XMIT_SIZE - 1;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
- port->icount.tx += s->tx_dma_len;
+ param = &s->param_tx;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
+ /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
+ param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
- if (!uart_circ_empty(xmit)) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- } else {
- s->cookie_tx = -EINVAL;
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ s->cookie_tx = -EINVAL;
+ chan = dma_request_channel(mask, filter, param);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ if (chan) {
+ s->chan_tx = chan;
+ /* UART circular tx buffer is an aligned page. */
+ s->tx_dma_addr = dma_map_single(chan->device->dev,
+ port->state->xmit.buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
+ dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
+ dma_release_channel(chan);
+ s->chan_tx = NULL;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
+ __func__, UART_XMIT_SIZE,
+ port->state->xmit.buf, &s->tx_dma_addr);
}
+
+ INIT_WORK(&s->work_tx, work_fn_tx);
}
- spin_unlock_irqrestore(&port->lock, flags);
-}
+ param = &s->param_rx;
-/* Locking: called with port lock held */
-static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
-{
- struct uart_port *port = &s->port;
- struct tty_port *tport = &port->state->port;
- int copied;
+ /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
+ param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
- copied = tty_insert_flip_string(tport, buf, count);
- if (copied < count) {
- dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
- count - copied);
- port->icount.buf_overrun++;
- }
+ chan = dma_request_channel(mask, filter, param);
+ dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+ if (chan) {
+ unsigned int i;
+ dma_addr_t dma;
+ void *buf;
- port->icount.rx += copied;
+ s->chan_rx = chan;
- return copied;
-}
+ s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
+ buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
+ &dma, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(port->dev,
+ "Failed to allocate Rx dma buffer, using PIO\n");
+ dma_release_channel(chan);
+ s->chan_rx = NULL;
+ sci_start_rx(port);
+ return;
+ }
-static int sci_dma_rx_find_active(struct sci_port *s)
-{
- unsigned int i;
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
- for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
- if (s->active_rx == s->cookie_rx[i])
- return i;
+ sg_init_table(sg, 1);
+ s->rx_buf[i] = buf;
+ sg_dma_address(sg) = dma;
+ sg->length = s->buf_len_rx;
- dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
- s->active_rx);
- return -1;
+ buf += s->buf_len_rx;
+ dma += s->buf_len_rx;
+ }
+
+ INIT_WORK(&s->work_rx, work_fn_rx);
+ setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+ sci_submit_rx(s);
+ }
}
-static void sci_dma_rx_complete(void *arg)
+static void sci_free_dma(struct uart_port *port)
{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- unsigned long flags;
- int active, count = 0;
+ struct sci_port *s = to_sci_port(port);
- dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line,
- s->active_rx);
+ if (s->chan_tx)
+ sci_tx_dma_release(s, false);
+ if (s->chan_rx)
+ sci_rx_dma_release(s, false);
+}
+#else
+static inline void sci_request_dma(struct uart_port *port)
+{
+}
- spin_lock_irqsave(&port->lock, flags);
+static inline void sci_free_dma(struct uart_port *port)
+{
+}
+#endif
- active = sci_dma_rx_find_active(s);
- if (active >= 0)
- count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
+{
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
- mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+ if (s->chan_rx) {
+ u16 scr = serial_port_in(port, SCSCR);
+ u16 ssr = serial_port_in(port, SCxSR);
- spin_unlock_irqrestore(&port->lock, flags);
+ /* Disable future Rx interrupts */
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ disable_irq_nosync(irq);
+ scr |= SCSCR_RDRQE;
+ } else {
+ scr &= ~SCSCR_RIE;
+ }
+ serial_port_out(port, SCSCR, scr);
+ /* Clear current interrupt */
+ serial_port_out(port, SCxSR,
+ ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
+ dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
+ jiffies, s->rx_timeout);
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
- if (count)
- tty_flip_buffer_push(&port->state->port);
+ return IRQ_HANDLED;
+ }
+#endif
- schedule_work(&s->work_rx);
+ /* I think sci_receive_chars has to be called irrespective
+ * of whether the I_IXOFF is set, otherwise, how is the interrupt
+ * to be disabled?
+ */
+ sci_receive_chars(ptr);
+
+ return IRQ_HANDLED;
}
-static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
{
- struct dma_chan *chan = s->chan_rx;
- struct uart_port *port = &s->port;
+ struct uart_port *port = ptr;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- s->chan_rx = NULL;
- s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ sci_transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
- dmaengine_terminate_all(chan);
- dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
- sg_dma_address(&s->sg_rx[0]));
- dma_release_channel(chan);
- if (enable_pio)
- sci_start_rx(port);
+
+ return IRQ_HANDLED;
}
-static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
- unsigned long flags;
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
- spin_lock_irqsave(&port->lock, flags);
- s->chan_tx = NULL;
- s->cookie_tx = -EINVAL;
- spin_unlock_irqrestore(&port->lock, flags);
- dmaengine_terminate_all(chan);
- dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
- DMA_TO_DEVICE);
- dma_release_channel(chan);
- if (enable_pio)
- sci_start_tx(port);
+ /* Handle errors */
+ if (port->type == PORT_SCI) {
+ if (sci_handle_errors(port)) {
+ /* discard character in rx buffer */
+ serial_port_in(port, SCxSR);
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+ }
+ } else {
+ sci_handle_fifo_overrun(port);
+ if (!s->chan_rx)
+ sci_receive_chars(ptr);
+ }
+
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
+
+ /* Kick the transmission */
+ if (!s->chan_tx)
+ sci_tx_interrupt(irq, ptr);
+
+ return IRQ_HANDLED;
}
-static void sci_submit_rx(struct sci_port *s)
+static irqreturn_t sci_br_interrupt(int irq, void *ptr)
{
- struct dma_chan *chan = s->chan_rx;
- int i;
+ struct uart_port *port = ptr;
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
- struct dma_async_tx_descriptor *desc;
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+ sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
- desc = dmaengine_prep_slave_sg(chan,
- sg, 1, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- goto fail;
+ return IRQ_HANDLED;
+}
- desc->callback = sci_dma_rx_complete;
- desc->callback_param = s;
- s->cookie_rx[i] = dmaengine_submit(desc);
- if (dma_submit_error(s->cookie_rx[i]))
- goto fail;
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
+{
+ unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+ irqreturn_t ret = IRQ_NONE;
- dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
- s->cookie_rx[i], i);
+ ssr_status = serial_port_in(port, SCxSR);
+ scr_status = serial_port_in(port, SCSCR);
+ if (s->overrun_reg == SCxSR)
+ orer_status = ssr_status;
+ else {
+ if (sci_getreg(port, s->overrun_reg)->size)
+ orer_status = serial_port_in(port, s->overrun_reg);
}
- s->active_rx = s->cookie_rx[0];
+ err_enabled = scr_status & port_rx_irq_mask(port);
- dma_async_issue_pending(chan);
- return;
+ /* Tx Interrupt */
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
+ !s->chan_tx)
+ ret = sci_tx_interrupt(irq, ptr);
-fail:
- if (i)
- dmaengine_terminate_all(chan);
- for (i = 0; i < 2; i++)
- s->cookie_rx[i] = -EINVAL;
- s->active_rx = -EINVAL;
- dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
- sci_rx_dma_release(s, true);
-}
+ /*
+ * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
+ * DR flags
+ */
+ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
+ (scr_status & SCSCR_RIE))
+ ret = sci_rx_interrupt(irq, ptr);
-static void work_fn_rx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_rx);
- struct uart_port *port = &s->port;
- struct dma_async_tx_descriptor *desc;
- struct dma_tx_state state;
- enum dma_status status;
- unsigned long flags;
- int new;
+ /* Error Interrupt */
+ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
+ ret = sci_er_interrupt(irq, ptr);
- spin_lock_irqsave(&port->lock, flags);
- new = sci_dma_rx_find_active(s);
- if (new < 0) {
- spin_unlock_irqrestore(&port->lock, flags);
- return;
+ /* Break Interrupt */
+ if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
+ ret = sci_br_interrupt(irq, ptr);
+
+ /* Overrun Interrupt */
+ if (orer_status & s->overrun_mask) {
+ sci_handle_fifo_overrun(port);
+ ret = IRQ_HANDLED;
}
- status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
- if (status != DMA_COMPLETE) {
- /* Handle incomplete DMA receive */
- struct dma_chan *chan = s->chan_rx;
- unsigned int read;
- int count;
+ return ret;
+}
- dmaengine_terminate_all(chan);
- read = sg_dma_len(&s->sg_rx[new]) - state.residue;
- dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
- s->active_rx);
+/*
+ * Here we define a transition notifier so that we can update all of our
+ * ports' baud rate when the peripheral clock changes.
+ */
+static int sci_notifier(struct notifier_block *self,
+ unsigned long phase, void *p)
+{
+ struct sci_port *sci_port;
+ unsigned long flags;
- if (read) {
- count = sci_dma_rx_push(s, s->rx_buf[new], read);
- if (count)
- tty_flip_buffer_push(&port->state->port);
- }
+ sci_port = container_of(self, struct sci_port, freq_transition);
- spin_unlock_irqrestore(&port->lock, flags);
+ if (phase == CPUFREQ_POSTCHANGE) {
+ struct uart_port *port = &sci_port->port;
- sci_submit_rx(s);
- return;
+ spin_lock_irqsave(&port->lock, flags);
+ port->uartclk = clk_get_rate(sci_port->iclk);
+ spin_unlock_irqrestore(&port->lock, flags);
}
- desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[new], 1,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- goto fail;
-
- desc->callback = sci_dma_rx_complete;
- desc->callback_param = s;
- s->cookie_rx[new] = dmaengine_submit(desc);
- if (dma_submit_error(s->cookie_rx[new]))
- goto fail;
+ return NOTIFY_OK;
+}
- s->active_rx = s->cookie_rx[!new];
+static const struct sci_irq_desc {
+ const char *desc;
+ irq_handler_t handler;
+} sci_irq_desc[] = {
+ /*
+ * Split out handlers, the default case.
+ */
+ [SCIx_ERI_IRQ] = {
+ .desc = "rx err",
+ .handler = sci_er_interrupt,
+ },
- dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
- __func__, s->cookie_rx[new], new, s->active_rx);
- spin_unlock_irqrestore(&port->lock, flags);
- return;
+ [SCIx_RXI_IRQ] = {
+ .desc = "rx full",
+ .handler = sci_rx_interrupt,
+ },
-fail:
- spin_unlock_irqrestore(&port->lock, flags);
- dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
- sci_rx_dma_release(s, true);
-}
+ [SCIx_TXI_IRQ] = {
+ .desc = "tx empty",
+ .handler = sci_tx_interrupt,
+ },
-static void work_fn_tx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_tx);
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- dma_addr_t buf;
+ [SCIx_BRI_IRQ] = {
+ .desc = "break",
+ .handler = sci_br_interrupt,
+ },
/*
- * DMA is idle now.
- * Port xmit buffer is already mapped, and it is one page... Just adjust
- * offsets and lengths. Since it is a circular buffer, we have to
- * transmit till the end, and then the rest. Take the port lock to get a
- * consistent xmit buffer state.
+ * Special muxed handler.
*/
- spin_lock_irq(&port->lock);
- buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
- s->tx_dma_len = min_t(unsigned int,
- CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
- CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
- spin_unlock_irq(&port->lock);
+ [SCIx_MUX_IRQ] = {
+ .desc = "mux",
+ .handler = sci_mpxed_interrupt,
+ },
+};
- desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
- DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
- }
+static int sci_request_irq(struct sci_port *port)
+{
+ struct uart_port *up = &port->port;
+ int i, j, ret = 0;
- dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
- DMA_TO_DEVICE);
+ for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
+ const struct sci_irq_desc *desc;
+ int irq;
- spin_lock_irq(&port->lock);
- desc->callback = sci_dma_tx_complete;
- desc->callback_param = s;
- spin_unlock_irq(&port->lock);
- s->cookie_tx = dmaengine_submit(desc);
- if (dma_submit_error(s->cookie_tx)) {
- dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ i = SCIx_MUX_IRQ;
+ irq = up->irq;
+ } else {
+ irq = port->irqs[i];
+
+ /*
+ * Certain port types won't support all of the
+ * available interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
+ }
+
+ desc = sci_irq_desc + i;
+ port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
+ dev_name(up->dev), desc->desc);
+ if (!port->irqstr[j])
+ goto out_nomem;
+
+ ret = request_irq(irq, desc->handler, up->irqflags,
+ port->irqstr[j], port);
+ if (unlikely(ret)) {
+ dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
+ goto out_noirq;
+ }
}
- dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
- __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
-
- dma_async_issue_pending(chan);
-}
-#endif
-
-static void sci_start_tx(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- unsigned short ctrl;
+ return 0;
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 new, scr = serial_port_in(port, SCSCR);
- if (s->chan_tx)
- new = scr | SCSCR_TDRQE;
- else
- new = scr & ~SCSCR_TDRQE;
- if (new != scr)
- serial_port_out(port, SCSCR, new);
- }
+out_noirq:
+ while (--i >= 0)
+ free_irq(port->irqs[i], port);
- if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
- dma_submit_error(s->cookie_tx)) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- }
-#endif
+out_nomem:
+ while (--j >= 0)
+ kfree(port->irqstr[j]);
- if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
- }
+ return ret;
}
-static void sci_stop_tx(struct uart_port *port)
+static void sci_free_irq(struct sci_port *port)
{
- unsigned short ctrl;
+ int i;
- /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
+ /*
+ * Intentionally in reverse order so we iterate over the muxed
+ * IRQ first.
+ */
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ int irq = port->irqs[i];
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_TDRQE;
+ /*
+ * Certain port types won't support all of the available
+ * interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
- ctrl &= ~SCSCR_TIE;
+ free_irq(port->irqs[i], port);
+ kfree(port->irqstr[i]);
- serial_port_out(port, SCSCR, ctrl);
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ /* If there's only one IRQ, we're done. */
+ return;
+ }
+ }
}
-static void sci_start_rx(struct uart_port *port)
+static unsigned int sci_tx_empty(struct uart_port *port)
{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
+ unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short in_tx_fifo = sci_txfill(port);
- serial_port_out(port, SCSCR, ctrl);
+ return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
}
-static void sci_stop_rx(struct uart_port *port)
+/*
+ * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
+ * CTS/RTS is supported in hardware by at least one port and controlled
+ * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
+ * handled via the ->init_pins() op, which is a bit of a one-way street,
+ * lacking any ability to defer pin control -- this will later be
+ * converted over to the GPIO framework).
+ *
+ * Other modes (such as loopback) are supported generically on certain
+ * port types, but not others. For these it's sufficient to test for the
+ * existence of the support register and simply ignore the port type.
+ */
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
+ if (mctrl & TIOCM_LOOP) {
+ const struct plat_sci_reg *reg;
- ctrl &= ~port_rx_irq_mask(port);
+ /*
+ * Standard loopback mode for SCFCR ports.
+ */
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size)
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) |
+ SCFCR_LOOP);
+ }
+}
- serial_port_out(port, SCSCR, ctrl);
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+ /*
+ * CTS/RTS is handled in hardware when supported, while nothing
+ * else is wired up. Keep it simple and simply assert DSR/CAR.
+ */
+ return TIOCM_DSR | TIOCM_CAR;
}
static void sci_break_ctl(struct uart_port *port, int break_state)
serial_port_out(port, SCSCR, scscr);
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static bool filter(struct dma_chan *chan, void *slave)
-{
- struct sh_dmae_slave *param = slave;
-
- dev_dbg(chan->device->dev, "%s: slave ID %d\n",
- __func__, param->shdma_slave.slave_id);
-
- chan->private = ¶m->shdma_slave;
- return true;
-}
-
-static void rx_timer_fn(unsigned long arg)
-{
- struct sci_port *s = (struct sci_port *)arg;
- struct uart_port *port = &s->port;
- u16 scr = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- scr &= ~SCSCR_RDRQE;
- enable_irq(s->irqs[SCIx_RXI_IRQ]);
- }
- serial_port_out(port, SCSCR, scr | SCSCR_RIE);
- dev_dbg(port->dev, "DMA Rx timed out\n");
- schedule_work(&s->work_rx);
-}
-
-static void sci_request_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- struct sh_dmae_slave *param;
- struct dma_chan *chan;
- dma_cap_mask_t mask;
-
- dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
-
- if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
- return;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- param = &s->param_tx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
-
- s->cookie_tx = -EINVAL;
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
- if (chan) {
- s->chan_tx = chan;
- /* UART circular tx buffer is an aligned page. */
- s->tx_dma_addr = dma_map_single(chan->device->dev,
- port->state->xmit.buf,
- UART_XMIT_SIZE,
- DMA_TO_DEVICE);
- if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
- dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
- dma_release_channel(chan);
- s->chan_tx = NULL;
- } else {
- dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
- __func__, UART_XMIT_SIZE,
- port->state->xmit.buf, &s->tx_dma_addr);
- }
-
- INIT_WORK(&s->work_tx, work_fn_tx);
- }
-
- param = &s->param_rx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
-
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
- if (chan) {
- unsigned int i;
- dma_addr_t dma;
- void *buf;
-
- s->chan_rx = chan;
-
- s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
- buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
- &dma, GFP_KERNEL);
- if (!buf) {
- dev_warn(port->dev,
- "Failed to allocate Rx dma buffer, using PIO\n");
- dma_release_channel(chan);
- s->chan_rx = NULL;
- sci_start_rx(port);
- return;
- }
-
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
-
- sg_init_table(sg, 1);
- s->rx_buf[i] = buf;
- sg_dma_address(sg) = dma;
- sg->length = s->buf_len_rx;
-
- buf += s->buf_len_rx;
- dma += s->buf_len_rx;
- }
-
- INIT_WORK(&s->work_rx, work_fn_rx);
- setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
-
- sci_submit_rx(s);
- }
-}
-
-static void sci_free_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
-
- if (s->chan_tx)
- sci_tx_dma_release(s, false);
- if (s->chan_rx)
- sci_rx_dma_release(s, false);
-}
-#else
-static inline void sci_request_dma(struct uart_port *port)
-{
-}
-
-static inline void sci_free_dma(struct uart_port *port)
-{
-}
-#endif
-
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff