net: Move flow control definitions to mii.h
authorSteve Glendinning <steve.glendinning@smsc.com>
Tue, 16 Dec 2008 10:00:00 +0000 (02:00 -0800)
committerDavid S. Miller <davem@davemloft.net>
Tue, 16 Dec 2008 10:00:00 +0000 (02:00 -0800)
flags used within drivers for indicating tx and rx flow control are
defined in 4 drivers (and probably more), move these constants to mii.h.

The 3 SMSC drivers use the same constants (FLOW_CTRL_TX), but TG3 uses
TG3_FLOW_CTRL_TX, so this patch also renames the constants within TG3.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/smsc911x.h
drivers/net/smsc9420.h
drivers/net/tg3.c
drivers/net/tg3.h
drivers/net/usb/smsc95xx.c
include/linux/mii.h

index f818cf0415f7ddea0e86d10546c906335909e81b..2b76654bb958c665fb39fbe7a2b5bae225e61320 100644 (file)
@@ -61,9 +61,6 @@
 #define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0)
 #endif                         /* CONFIG_DEBUG_SPINLOCK */
 
-#define FLOW_CTRL_TX           (1)
-#define FLOW_CTRL_RX           (2)
-
 /* SMSC911x registers and bitfields */
 #define RX_DATA_FIFO                   0x00
 
index 80c426dc43251f3119f2f6f8170f586f123486f2..69c351f93f86cd3c531121411215ca692061c8b2 100644 (file)
@@ -45,9 +45,6 @@
 
 #define SMSC9420_EEPROM_SIZE           ((u32)11)
 
-#define FLOW_CTRL_TX                   (1)
-#define FLOW_CTRL_RX                   (2)
-
 #define PKT_BUF_SZ                     (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4)
 
 /***********************************************/
index 6e40d52107a410ad636f3b4bf1fce53bec2c29ad..f353f69caeb8357fa7f9c04d017b6ad9ede2cb2d 100644 (file)
@@ -1187,9 +1187,9 @@ static void tg3_link_report(struct tg3 *tp)
                printk(KERN_INFO PFX
                       "%s: Flow control is %s for TX and %s for RX.\n",
                       tp->dev->name,
-                      (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?
+                      (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
                       "on" : "off",
-                      (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?
+                      (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
                       "on" : "off");
                tg3_ump_link_report(tp);
        }
@@ -1199,11 +1199,11 @@ static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl)
 {
        u16 miireg;
 
-       if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
+       if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
                miireg = ADVERTISE_PAUSE_CAP;
-       else if (flow_ctrl & TG3_FLOW_CTRL_TX)
+       else if (flow_ctrl & FLOW_CTRL_TX)
                miireg = ADVERTISE_PAUSE_ASYM;
-       else if (flow_ctrl & TG3_FLOW_CTRL_RX)
+       else if (flow_ctrl & FLOW_CTRL_RX)
                miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
        else
                miireg = 0;
@@ -1215,11 +1215,11 @@ static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
 {
        u16 miireg;
 
-       if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
+       if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
                miireg = ADVERTISE_1000XPAUSE;
-       else if (flow_ctrl & TG3_FLOW_CTRL_TX)
+       else if (flow_ctrl & FLOW_CTRL_TX)
                miireg = ADVERTISE_1000XPSE_ASYM;
-       else if (flow_ctrl & TG3_FLOW_CTRL_RX)
+       else if (flow_ctrl & FLOW_CTRL_RX)
                miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
        else
                miireg = 0;
@@ -1256,16 +1256,16 @@ static u8 tg3_resolve_flowctrl_1000X(u16 lcladv, u16 rmtadv)
        if (lcladv & ADVERTISE_1000XPAUSE) {
                if (lcladv & ADVERTISE_1000XPSE_ASYM) {
                        if (rmtadv & LPA_1000XPAUSE)
-                               cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
+                               cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
                        else if (rmtadv & LPA_1000XPAUSE_ASYM)
-                               cap = TG3_FLOW_CTRL_RX;
+                               cap = FLOW_CTRL_RX;
                } else {
                        if (rmtadv & LPA_1000XPAUSE)
-                               cap = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
+                               cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
                }
        } else if (lcladv & ADVERTISE_1000XPSE_ASYM) {
                if ((rmtadv & LPA_1000XPAUSE) && (rmtadv & LPA_1000XPAUSE_ASYM))
-                       cap = TG3_FLOW_CTRL_TX;
+                       cap = FLOW_CTRL_TX;
        }
 
        return cap;
@@ -1294,7 +1294,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
 
        tp->link_config.active_flowctrl = flowctrl;
 
-       if (flowctrl & TG3_FLOW_CTRL_RX)
+       if (flowctrl & FLOW_CTRL_RX)
                tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
        else
                tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@@ -1302,7 +1302,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
        if (old_rx_mode != tp->rx_mode)
                tw32_f(MAC_RX_MODE, tp->rx_mode);
 
-       if (flowctrl & TG3_FLOW_CTRL_TX)
+       if (flowctrl & FLOW_CTRL_TX)
                tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
        else
                tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@@ -9419,12 +9419,12 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 
        epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
 
-       if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)
+       if (tp->link_config.active_flowctrl & FLOW_CTRL_RX)
                epause->rx_pause = 1;
        else
                epause->rx_pause = 0;
 
-       if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)
+       if (tp->link_config.active_flowctrl & FLOW_CTRL_TX)
                epause->tx_pause = 1;
        else
                epause->tx_pause = 0;
@@ -9475,14 +9475,14 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
                        }
                } else {
                        if (epause->rx_pause)
-                               tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
+                               tp->link_config.flowctrl |= FLOW_CTRL_RX;
                        else
-                               tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
+                               tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
 
                        if (epause->tx_pause)
-                               tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
+                               tp->link_config.flowctrl |= FLOW_CTRL_TX;
                        else
-                               tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
+                               tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
 
                        if (netif_running(dev))
                                tg3_setup_flow_control(tp, 0, 0);
@@ -9502,13 +9502,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
                else
                        tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
                if (epause->rx_pause)
-                       tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
+                       tp->link_config.flowctrl |= FLOW_CTRL_RX;
                else
-                       tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
+                       tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
                if (epause->tx_pause)
-                       tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
+                       tp->link_config.flowctrl |= FLOW_CTRL_TX;
                else
-                       tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
+                       tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
 
                if (netif_running(dev)) {
                        tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -13849,7 +13849,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
        /* flow control autonegotiation is default behavior */
        tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
-       tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
+       tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
 
        tg3_init_coal(tp);
 
index 61556764a505427216fb6677105c2ffcffa48d95..0880cfacdcba16ce5e033f7c7cd7624610e05d1d 100644 (file)
@@ -2338,8 +2338,6 @@ struct tg3_link_config {
        u8                              duplex;
        u8                              autoneg;
        u8                              flowctrl;
-#define TG3_FLOW_CTRL_TX               0x01
-#define TG3_FLOW_CTRL_RX               0x02
 
        /* Describes what we actually have. */
        u8                              active_flowctrl;
index 4638a7bb471eb544459e266f28e69e2fe83ff086..ee2eac3047b32aa7c16e0baadf0d0010ed026f3c 100644 (file)
@@ -45,8 +45,6 @@
 #define SMSC95XX_INTERNAL_PHY_ID       (1)
 #define SMSC95XX_TX_OVERHEAD           (8)
 #define SMSC95XX_TX_OVERHEAD_CSUM      (12)
-#define FLOW_CTRL_TX                   (1)
-#define FLOW_CTRL_RX                   (2)
 
 struct smsc95xx_priv {
        u32 mac_cr;
index 151b7e0182c7e6dcce9574a0b3f60dc96a544016..4a376e0816fde575774e66f5ffe7ce9a16bc045f 100644 (file)
 #define LPA_1000FULL            0x0800  /* Link partner 1000BASE-T full duplex */
 #define LPA_1000HALF            0x0400  /* Link partner 1000BASE-T half duplex */
 
+/* Flow control flags */
+#define FLOW_CTRL_TX           0x01
+#define FLOW_CTRL_RX           0x02
+
 /* This structure is used in all SIOCxMIIxxx ioctl calls */
 struct mii_ioctl_data {
        __u16           phy_id;