#include <drm/drm_panel.h>
#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
#include <linux/irq.h>
+#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
#include <video/mipi_display.h>
#include <video/videomode.h>
+#include "exynos_drm_crtc.h"
#include "exynos_drm_drv.h"
/* returns true iff both arguments logically differs */
struct clk *bus_clk;
struct regulator_bulk_data supplies[2];
int irq;
+ int te_gpio;
u32 pll_clk_rate;
u32 burst_clk_rate;
return IRQ_HANDLED;
}
+static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
+{
+ struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
+ struct drm_encoder *encoder = dsi->encoder;
+
+ if (dsi->state & DSIM_STATE_ENABLED)
+ exynos_drm_crtc_te_handler(encoder->crtc);
+
+ return IRQ_HANDLED;
+}
+
+static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
+{
+ enable_irq(dsi->irq);
+
+ if (gpio_is_valid(dsi->te_gpio))
+ enable_irq(gpio_to_irq(dsi->te_gpio));
+}
+
+static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
+{
+ if (gpio_is_valid(dsi->te_gpio))
+ disable_irq(gpio_to_irq(dsi->te_gpio));
+
+ disable_irq(dsi->irq);
+}
+
static int exynos_dsi_init(struct exynos_dsi *dsi)
{
exynos_dsi_enable_clock(dsi);
exynos_dsi_reset(dsi);
- enable_irq(dsi->irq);
+ exynos_dsi_enable_irq(dsi);
exynos_dsi_wait_for_reset(dsi);
exynos_dsi_init_link(dsi);
return 0;
}
+static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
+{
+ int ret;
+
+ dsi->te_gpio = of_get_named_gpio(dsi->panel_node, "te-gpios", 0);
+ if (!gpio_is_valid(dsi->te_gpio)) {
+ dev_err(dsi->dev, "no te-gpios specified\n");
+ ret = dsi->te_gpio;
+ goto out;
+ }
+
+ ret = gpio_request_one(dsi->te_gpio, GPIOF_IN, "te_gpio");
+ if (ret) {
+ dev_err(dsi->dev, "gpio request failed with %d\n", ret);
+ goto out;
+ }
+
+ /*
+ * This TE GPIO IRQ should not be set to IRQ_NOAUTOEN, because panel
+ * calls drm_panel_init() first then calls mipi_dsi_attach() in probe().
+ * It means that te_gpio is invalid when exynos_dsi_enable_irq() is
+ * called by drm_panel_init() before panel is attached.
+ */
+ ret = request_threaded_irq(gpio_to_irq(dsi->te_gpio),
+ exynos_dsi_te_irq_handler, NULL,
+ IRQF_TRIGGER_RISING, "TE", dsi);
+ if (ret) {
+ dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
+ gpio_free(dsi->te_gpio);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
+{
+ if (gpio_is_valid(dsi->te_gpio)) {
+ free_irq(gpio_to_irq(dsi->te_gpio), dsi);
+ gpio_free(dsi->te_gpio);
+ dsi->te_gpio = -ENOENT;
+ }
+}
+
static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
struct mipi_dsi_device *device)
{
if (dsi->connector.dev)
drm_helper_hpd_irq_event(dsi->connector.dev);
+ /*
+ * This is a temporary solution and should be made by more generic way.
+ *
+ * If attached panel device is for command mode one, dsi should register
+ * TE interrupt handler.
+ */
+ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) {
+ int ret = exynos_dsi_register_te_irq(dsi);
+
+ if (ret)
+ return ret;
+ }
+
return 0;
}
{
struct exynos_dsi *dsi = host_to_dsi(host);
+ exynos_dsi_unregister_te_irq(dsi);
+
dsi->panel_node = NULL;
if (dsi->connector.dev)
exynos_dsi_disable_clock(dsi);
- disable_irq(dsi->irq);
+ exynos_dsi_disable_irq(dsi);
}
dsi->state &= ~DSIM_STATE_CMD_LPM;
goto err_del_component;
}
+ /* To be checked as invalid one */
+ dsi->te_gpio = -ENOENT;
+
init_completion(&dsi->completed);
spin_lock_init(&dsi->transfer_lock);
INIT_LIST_HEAD(&dsi->transfer_list);