x86_64: prepare shared pci/mmconfig.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile
index 482b2945a472e48da188ae63fae922472dab75a5..77b1b9abedc2822b743da2190da6d1b8b4e3c01f 100644 (file)
--- a/arch/x86_64/pci/Makefile
+++ b/arch/x86_64/pci/Makefile
@@ -11,7 +11,7 @@ obj-y         += fixup.o init.o
 obj-$(CONFIG_ACPI)     += acpi.o
 obj-y                  += legacy.o irq.o common.o early.o
 # mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
 
 obj-$(CONFIG_NUMA)     += k8-bus_64.o
 

diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
deleted file mode 100644 (file)
index 4095e4d..0000000
--- a/arch/x86_64/pci/mmconfig.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- *
- * This is an 64bit optimized version that always keeps the full mmconfig
- * space mapped. This allows lockless config space operation.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/bitmap.h>
-#include <asm/e820.h>
-
-#include "pci.h"
-
-/* Static virtual mapping of the MMCONFIG aperture */
-struct mmcfg_virt {
-       struct acpi_mcfg_allocation *cfg;
-       char __iomem *virt;
-};
-static struct mmcfg_virt *pci_mmcfg_virt;
-
-static char __iomem *get_virt(unsigned int seg, unsigned bus)
-{
-       struct acpi_mcfg_allocation *cfg;
-       int cfg_num;
-
-       for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
-               cfg = pci_mmcfg_virt[cfg_num].cfg;
-               if (cfg->pci_segment == seg &&
-                   (cfg->start_bus_number <= bus) &&
-                   (cfg->end_bus_number >= bus))
-                       return pci_mmcfg_virt[cfg_num].virt;
-       }
-
-       /* Fall back to type 0 */
-       return NULL;
-}
-
-static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
-{
-       char __iomem *addr;
-       if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
-               test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
-               return NULL;
-       addr = get_virt(seg, bus);
-       if (!addr)
-               return NULL;
-       return addr + ((bus << 20) | (devfn << 12));
-}
-
-static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
-                         unsigned int devfn, int reg, int len, u32 *value)
-{
-       char __iomem *addr;
-
-       /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
-       if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
-               *value = -1;
-               return -EINVAL;
-       }
-
-       addr = pci_dev_base(seg, bus, devfn);
-       if (!addr)
-               return pci_conf1_read(seg,bus,devfn,reg,len,value);
-
-       switch (len) {
-       case 1:
-               *value = mmio_config_readb(addr + reg);
-               break;
-       case 2:
-               *value = mmio_config_readw(addr + reg);
-               break;
-       case 4:
-               *value = mmio_config_readl(addr + reg);
-               break;
-       }
-
-       return 0;
-}
-
-static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
-                          unsigned int devfn, int reg, int len, u32 value)
-{
-       char __iomem *addr;
-
-       /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
-       if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
-               return -EINVAL;
-
-       addr = pci_dev_base(seg, bus, devfn);
-       if (!addr)
-               return pci_conf1_write(seg,bus,devfn,reg,len,value);
-
-       switch (len) {
-       case 1:
-               mmio_config_writeb(addr + reg, value);
-               break;
-       case 2:
-               mmio_config_writew(addr + reg, value);
-               break;
-       case 4:
-               mmio_config_writel(addr + reg, value);
-               break;
-       }
-
-       return 0;
-}
-
-static struct pci_raw_ops pci_mmcfg = {
-       .read =         pci_mmcfg_read,
-       .write =        pci_mmcfg_write,
-};
-
-static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
-{
-       void __iomem *addr;
-       u32 size;
-
-       size = (cfg->end_bus_number + 1) << 20;
-       addr = ioremap_nocache(cfg->address, size);
-       if (addr) {
-               printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
-                      cfg->address, cfg->address + size - 1);
-       }
-       return addr;
-}
-
-int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
-                                   unsigned int devfn)
-{
-       return pci_dev_base(seg, bus, devfn) != NULL;
-}
-
-int __init pci_mmcfg_arch_init(void)
-{
-       int i;
-       pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
-                                pci_mmcfg_config_num, GFP_KERNEL);
-       if (pci_mmcfg_virt == NULL) {
-               printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
-               return 0;
-       }
-
-       for (i = 0; i < pci_mmcfg_config_num; ++i) {
-               pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-               pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
-               if (!pci_mmcfg_virt[i].virt) {
-                       printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
-                                       "segment %d\n",
-                               pci_mmcfg_config[i].pci_segment);
-                       return 0;
-               }
-       }
-       raw_pci_ops = &pci_mmcfg;
-       return 1;
-}

diff --git a/arch/x86_64/pci/mmconfig_64.c b/arch/x86_64/pci/mmconfig_64.c
new file mode 100644 (file)
index 0000000..4095e4d
--- /dev/null
+++ b/arch/x86_64/pci/mmconfig_64.c
@@ -0,0 +1,157 @@
+/*
+ * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
+ *
+ * This is an 64bit optimized version that always keeps the full mmconfig
+ * space mapped. This allows lockless config space operation.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <asm/e820.h>
+
+#include "pci.h"
+
+/* Static virtual mapping of the MMCONFIG aperture */
+struct mmcfg_virt {
+       struct acpi_mcfg_allocation *cfg;
+       char __iomem *virt;
+};
+static struct mmcfg_virt *pci_mmcfg_virt;
+
+static char __iomem *get_virt(unsigned int seg, unsigned bus)
+{
+       struct acpi_mcfg_allocation *cfg;
+       int cfg_num;
+
+       for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
+               cfg = pci_mmcfg_virt[cfg_num].cfg;
+               if (cfg->pci_segment == seg &&
+                   (cfg->start_bus_number <= bus) &&
+                   (cfg->end_bus_number >= bus))
+                       return pci_mmcfg_virt[cfg_num].virt;
+       }
+
+       /* Fall back to type 0 */
+       return NULL;
+}
+
+static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
+{
+       char __iomem *addr;
+       if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
+               test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
+               return NULL;
+       addr = get_virt(seg, bus);
+       if (!addr)
+               return NULL;
+       return addr + ((bus << 20) | (devfn << 12));
+}
+
+static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+                         unsigned int devfn, int reg, int len, u32 *value)
+{
+       char __iomem *addr;
+
+       /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+       if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
+               *value = -1;
+               return -EINVAL;
+       }
+
+       addr = pci_dev_base(seg, bus, devfn);
+       if (!addr)
+               return pci_conf1_read(seg,bus,devfn,reg,len,value);
+
+       switch (len) {
+       case 1:
+               *value = mmio_config_readb(addr + reg);
+               break;
+       case 2:
+               *value = mmio_config_readw(addr + reg);
+               break;
+       case 4:
+               *value = mmio_config_readl(addr + reg);
+               break;
+       }
+
+       return 0;
+}
+
+static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+                          unsigned int devfn, int reg, int len, u32 value)
+{
+       char __iomem *addr;
+
+       /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+       if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
+               return -EINVAL;
+
+       addr = pci_dev_base(seg, bus, devfn);
+       if (!addr)
+               return pci_conf1_write(seg,bus,devfn,reg,len,value);
+
+       switch (len) {
+       case 1:
+               mmio_config_writeb(addr + reg, value);
+               break;
+       case 2:
+               mmio_config_writew(addr + reg, value);
+               break;
+       case 4:
+               mmio_config_writel(addr + reg, value);
+               break;
+       }
+
+       return 0;
+}
+
+static struct pci_raw_ops pci_mmcfg = {
+       .read =         pci_mmcfg_read,
+       .write =        pci_mmcfg_write,
+};
+
+static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
+{
+       void __iomem *addr;
+       u32 size;
+
+       size = (cfg->end_bus_number + 1) << 20;
+       addr = ioremap_nocache(cfg->address, size);
+       if (addr) {
+               printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
+                      cfg->address, cfg->address + size - 1);
+       }
+       return addr;
+}
+
+int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
+                                   unsigned int devfn)
+{
+       return pci_dev_base(seg, bus, devfn) != NULL;
+}
+
+int __init pci_mmcfg_arch_init(void)
+{
+       int i;
+       pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+                                pci_mmcfg_config_num, GFP_KERNEL);
+       if (pci_mmcfg_virt == NULL) {
+               printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
+               return 0;
+       }
+
+       for (i = 0; i < pci_mmcfg_config_num; ++i) {
+               pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
+               pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
+               if (!pci_mmcfg_virt[i].virt) {
+                       printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
+                                       "segment %d\n",
+                               pci_mmcfg_config[i].pci_segment);
+                       return 0;
+               }
+       }
+       raw_pci_ops = &pci_mmcfg;
+       return 1;
+}