spi/xilinx: Revert master->setup function removal

master->setup() must be initialized to be able
to successfully run spi_bitbang_start()
and satisfy if/else logic there.

"spi: convert drivers to use bits_per_word_mask"
(sha1: 24778be20f87d5aadb19624fc768b3159fa43efc)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index fb56fcfdf65e76b3110ea75bdbb6d9f61141cb93..09a9428525934e2e56732e89202680102295dd9b 100644 (file)
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -233,6 +233,21 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
        return 0;
 }
 
+static int xilinx_spi_setup(struct spi_device *spi)
+{
+       /* always return 0, we can not check the number of bits.
+        * There are cases when SPI setup is called before any driver is
+        * there, in that case the SPI core defaults to 8 bits, which we
+        * do not support in some cases. But if we return an error, the
+        * SPI device would not be registered and no driver can get hold of it
+        * When the driver is there, it will call SPI setup again with the
+        * correct number of bits per transfer.
+        * If a driver setups with the wrong bit number, it will fail when
+        * it tries to do a transfer
+        */
+       return 0;
+}
+
 static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
 {
        u8 sr;
@@ -360,6 +375,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
        xspi->bitbang.chipselect = xilinx_spi_chipselect;
        xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
        xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
+       xspi->bitbang.master->setup = xilinx_spi_setup;
        init_completion(&xspi->done);
 
        if (!request_mem_region(mem->start, resource_size(mem),