--- /dev/null
+/*
+ * GE IMP3A Device Tree Source
+ *
+ * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "GE_IMP3A";
+ compatible = "ge,imp3a";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fef05000 {
+ reg = <0 0xfef05000 0 0x1000>;
+
+ ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+ 0x1 0x0 0x0 0xe0000000 0x08000000
+ 0x2 0x0 0x0 0xe8000000 0x08000000
+ 0x3 0x0 0x0 0xfc100000 0x00020000
+ 0x4 0x0 0x0 0xfc000000 0x00008000
+ 0x5 0x0 0x0 0xfc008000 0x00008000
+ 0x6 0x0 0x0 0xfee00000 0x00040000
+ 0x7 0x0 0x0 0xfee80000 0x00040000>;
+
+ /* nor@0,0 is a mirror of part of the memory in nor@1,0
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1000000>;
+ read-only;
+ };
+ };
+ */
+
+ nor@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ge,imp3a-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
+ fpga@4,0 {
+ compatible = "ge,imp3a-fpga-regs";
+ reg = <0x4 0x0 0x20>;
+ };
+
+ gef_pic: pic@4,20 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
+ reg = <0x4 0x20 0x20>;
+ interrupts = <6 7 0 0>;
+ };
+
+ gef_gpio: gpio@4,400 {
+ #gpio-cells = <2>;
+ compatible = "ge,imp3a-gpio";
+ reg = <0x4 0x400 0x24>;
+ gpio-controller;
+ };
+
+ wdt@4,800 {
+ compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x800 0x8>;
+ interrupts = <10 4>;
+ interrupt-parent = <&gef_pic>;
+ };
+
+ /* Second watchdog available, driver currently supports one.
+ wdt@4,808 {
+ compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x808 0x8>;
+ interrupts = <9 4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ */
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+
+ nand@7,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x7 0x0 0x40000>;
+ };
+ };
+
+ soc: soc@fef00000 {
+ ranges = <0x0 0 0xfef00000 0x100000>;
+
+ i2c@3000 {
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x51>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ dr_mode = "host";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0xc 0x4>;
+ reg = <0x1>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0xb 0x4>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "gmii";
+ };
+
+ enet2: ethernet@26000 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
+ reg = <0 0xfef08000 0 0x1000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+
+ pci1: pcie@fef09000 {
+ reg = <0 0xfef09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+
+ };
+
+ pci2: pcie@fef0a000 {
+ reg = <0 0xfef0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+};
+
+/include/ "fsl/p2020si-post.dtsi"
--- /dev/null
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_GE_IMP3A=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NET_PKTGEN=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
+CONFIG_DS1682=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_QE=m
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CPM=m
+CONFIG_I2C_MPC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+CONFIG_WATCHDOG=y
+CONFIG_GEF_WDT=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_STORAGE=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_RX8581=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+# CONFIG_NET_DMA is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
help
This option enables support for the Wind River SBC8560 board
+config GE_IMP3A
+ bool "GE Intelligent Platforms IMP3A"
+ select DEFAULT_UIMAGE
+ select SWIOTLB
+ select MMIO_NVRAM
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
+ help
+ This option enables support for the GE Intelligent Platforms IMP3A
+ board.
+
+ This board is a 3U CompactPCI Single Board Computer with a Freescale
+ P2020 processor.
+
config P2041_RDB
bool "Freescale P2041 RDB"
select DEFAULT_UIMAGE
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
+obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
--- /dev/null
+/*
+ * GE IMP3A Board Setup
+ *
+ * Author Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+#include <sysdev/ge/ge_pic.h>
+
+void __iomem *imp3a_regs;
+
+void __init ge_imp3a_pic_init(void)
+{
+ struct mpic *mpic;
+ struct device_node *np;
+ struct device_node *cascade_node = NULL;
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_NO_RESET |
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ } else {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ }
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif /* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+ struct pci_controller *hose;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+ if (ppc_md.progress)
+ ppc_md.progress("ge_imp3a_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+ of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+ of_device_is_compatible(np, "fsl,p2020-pcie")) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+ }
+#endif
+
+ mpc85xx_smp_init();
+
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
+ if (regs) {
+ imp3a_regs = of_iomap(regs, 0);
+ if (imp3a_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
+
+ printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
+}
+
+/* Return the PCB revision */
+static unsigned int ge_imp3a_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int ge_imp3a_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return reg & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int ge_imp3a_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return compactPCI Geographical Address */
+static unsigned int ge_imp3a_get_cpci_geo_addr(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return (reg & 0x0f00) >> 8;
+}
+
+/* Return compactPCI System Controller Status */
+static unsigned int ge_imp3a_get_cpci_is_syscon(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return reg & (1 << 12);
+}
+
+static void ge_imp3a_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
+ ('A' + ge_imp3a_get_board_rev() - 1));
+
+ seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
+
+ seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
+
+ seq_printf(m, "cPCI syscon\t: %s\n",
+ ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ge_imp3a_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0x9000;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
+
+define_machine(ge_imp3a) {
+ .name = "GE_IMP3A",
+ .probe = ge_imp3a_probe,
+ .setup_arch = ge_imp3a_setup_arch,
+ .init_IRQ = ge_imp3a_pic_init,
+ .show_cpuinfo = ge_imp3a_show_cpuinfo,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
}
}
+ for_each_compatible_node(np, NULL, "ge,imp3a-gpio") {
+
+ pr_debug("%s: Initialising GE GPIO\n", np->full_name);
+
+ /* Allocate chip structure */
+ gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
+ if (!gef_gpio_chip) {
+ pr_err("%s: Unable to allocate structure\n",
+ np->full_name);
+ continue;
+ }
+
+ /* Setup pointers to chip functions */
+ gef_gpio_chip->gc.of_gpio_n_cells = 2;
+ gef_gpio_chip->gc.ngpio = 16;
+ gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
+ gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
+ gef_gpio_chip->gc.get = gef_gpio_get;
+ gef_gpio_chip->gc.set = gef_gpio_set;
+
+ /* This function adds a memory mapped GPIO chip */
+ retval = of_mm_gpiochip_add(np, gef_gpio_chip);
+ if (retval) {
+ kfree(gef_gpio_chip);
+ pr_err("%s: Unable to add GPIO\n", np->full_name);
+ }
+ }
+
return 0;
};
arch_initcall(gef_gpio_init);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff