[TG3]: Add recovery logic when MMIOs are re-ordered
authorMichael Chan <mchan@broadcom.com>
Sat, 27 May 2006 00:48:07 +0000 (17:48 -0700)
committerDavid S. Miller <davem@sunset.davemloft.net>
Sun, 18 Jun 2006 04:26:26 +0000 (21:26 -0700)
Add recovery logic when we suspect that the system is re-ordering
MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx
completions and hit BUG_ON() in the tx completion path.

tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs
that must be strictly ordered (such as the send mailbox).  Determining
when to enable the flush is currently a manual process of adding known
chipsets to a list.

The new code replaces the BUG_ON() in the tx completion path with the
call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER
flag and reset the chip later in the workqueue to recover and start
flushing MMIOs to the mailbox.

A message to report the problem will be printed. We will then decide
whether or not to add the host bridge to the list of chipsets that do
re-ordering.

We may add some additional code later to print the host bridge's ID so
that the user can report it more easily.

The assumption that re-ordering can only happen on x86 systems is also
removed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c
drivers/net/tg3.h

index cb0ebf83c843f2f0694ee6565a140607859d1341..9e61df607413d8ff2409d0cde117051f317a10f0 100644 (file)
@@ -2967,6 +2967,29 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
        return err;
 }
 
+/* This is called whenever we suspect that the system chipset is re-
+ * ordering the sequence of MMIO to the tx send mailbox. The symptom
+ * is bogus tx completions. We try to recover by setting the
+ * TG3_FLAG_MBOX_WRITE_REORDER flag and resetting the chip later
+ * in the workqueue.
+ */
+static void tg3_tx_recover(struct tg3 *tp)
+{
+       BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
+              tp->write32_tx_mbox == tg3_write_indirect_mbox);
+
+       printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
+              "mapped I/O cycles to the network device, attempting to "
+              "recover. Please report the problem to the driver maintainer "
+              "and include system chipset information.\n", tp->dev->name);
+
+       spin_lock(&tp->lock);
+       spin_lock(&tp->tx_lock);
+       tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
+       spin_unlock(&tp->tx_lock);
+       spin_unlock(&tp->lock);
+}
+
 /* Tigon3 never reports partial packet sends.  So we do not
  * need special logic to handle SKBs that have not had all
  * of their frags sent yet, like SunGEM does.
@@ -2979,9 +3002,13 @@ static void tg3_tx(struct tg3 *tp)
        while (sw_idx != hw_idx) {
                struct tx_ring_info *ri = &tp->tx_buffers[sw_idx];
                struct sk_buff *skb = ri->skb;
-               int i;
+               int i, tx_bug = 0;
+
+               if (unlikely(skb == NULL)) {
+                       tg3_tx_recover(tp);
+                       return;
+               }
 
-               BUG_ON(skb == NULL);
                pci_unmap_single(tp->pdev,
                                 pci_unmap_addr(ri, mapping),
                                 skb_headlen(skb),
@@ -2992,10 +3019,9 @@ static void tg3_tx(struct tg3 *tp)
                sw_idx = NEXT_TX(sw_idx);
 
                for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-                       BUG_ON(sw_idx == hw_idx);
-
                        ri = &tp->tx_buffers[sw_idx];
-                       BUG_ON(ri->skb != NULL);
+                       if (unlikely(ri->skb != NULL || sw_idx == hw_idx))
+                               tx_bug = 1;
 
                        pci_unmap_page(tp->pdev,
                                       pci_unmap_addr(ri, mapping),
@@ -3006,6 +3032,11 @@ static void tg3_tx(struct tg3 *tp)
                }
 
                dev_kfree_skb(skb);
+
+               if (unlikely(tx_bug)) {
+                       tg3_tx_recover(tp);
+                       return;
+               }
        }
 
        tp->tx_cons = sw_idx;
@@ -3333,6 +3364,11 @@ static int tg3_poll(struct net_device *netdev, int *budget)
        /* run TX completion thread */
        if (sblk->idx[0].tx_consumer != tp->tx_cons) {
                tg3_tx(tp);
+               if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING)) {
+                       netif_rx_complete(netdev);
+                       schedule_work(&tp->reset_task);
+                       return 0;
+               }
        }
 
        /* run RX thread, within the bounds set by NAPI.
@@ -3581,6 +3617,13 @@ static void tg3_reset_task(void *_data)
        restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
        tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
+       if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) {
+               tp->write32_tx_mbox = tg3_write32_tx_mbox;
+               tp->write32_rx_mbox = tg3_write_flush_reg32;
+               tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
+               tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING;
+       }
+
        tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
        tg3_init_hw(tp, 1);
 
index ff0faab94bd52ce6ea2af167471b144ae7008f78..35669e18065c9cc3edc27e1a8992ac4b545bd15a 100644 (file)
@@ -2155,11 +2155,7 @@ struct tg3 {
 #define TG3_FLAG_ENABLE_ASF            0x00000020
 #define TG3_FLAG_5701_REG_WRITE_BUG    0x00000040
 #define TG3_FLAG_POLL_SERDES           0x00000080
-#if defined(CONFIG_X86)
 #define TG3_FLAG_MBOX_WRITE_REORDER    0x00000100
-#else
-#define TG3_FLAG_MBOX_WRITE_REORDER    0       /* disables code too */
-#endif
 #define TG3_FLAG_PCIX_TARGET_HWBUG     0x00000200
 #define TG3_FLAG_WOL_SPEED_100MB       0x00000400
 #define TG3_FLAG_WOL_ENABLE            0x00000800
@@ -2172,6 +2168,7 @@ struct tg3 {
 #define TG3_FLAG_PCI_HIGH_SPEED                0x00040000
 #define TG3_FLAG_PCI_32BIT             0x00080000
 #define TG3_FLAG_SRAM_USE_CONFIG       0x00100000
+#define TG3_FLAG_TX_RECOVERY_PENDING   0x00200000
 #define TG3_FLAG_SERDES_WOL_CAP                0x00400000
 #define TG3_FLAG_JUMBO_RING_ENABLE     0x00800000
 #define TG3_FLAG_10_100_ONLY           0x01000000