mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index c51c1b188d6401cb36fe77e5d05c0d55a95fa579..97dcadc8fa8bfd898c16f788851f6b43a06b979e 100644 (file)
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -49,61 +49,61 @@
  * OTP register offsets
  * Bank : 0x15
  */
-#define AB8500_GPADC_CAL_1             0x0F
-#define AB8500_GPADC_CAL_2             0x10
-#define AB8500_GPADC_CAL_3             0x11
-#define AB8500_GPADC_CAL_4             0x12
-#define AB8500_GPADC_CAL_5             0x13
-#define AB8500_GPADC_CAL_6             0x14
-#define AB8500_GPADC_CAL_7             0x15
+#define AB8500_GPADC_CAL_1     0x0F
+#define AB8500_GPADC_CAL_2     0x10
+#define AB8500_GPADC_CAL_3     0x11
+#define AB8500_GPADC_CAL_4     0x12
+#define AB8500_GPADC_CAL_5     0x13
+#define AB8500_GPADC_CAL_6     0x14
+#define AB8500_GPADC_CAL_7     0x15
 /* New calibration for 8540 */
 #define AB8540_GPADC_OTP4_REG_7        0x38
 #define AB8540_GPADC_OTP4_REG_6        0x39
 #define AB8540_GPADC_OTP4_REG_5        0x3A
 
 /* gpadc constants */
-#define EN_VINTCORE12                  0x04
-#define EN_VTVOUT                      0x02
-#define EN_GPADC                       0x01
-#define DIS_GPADC                      0x00
-#define AVG_1                          0x00
-#define AVG_4                          0x20
-#define AVG_8                          0x40
-#define AVG_16                         0x60
-#define ADC_SW_CONV                    0x04
-#define EN_ICHAR                       0x80
-#define BTEMP_PULL_UP                  0x08
-#define EN_BUF                         0x40
-#define DIS_ZERO                       0x00
-#define GPADC_BUSY                     0x01
-#define EN_FALLING                     0x10
-#define EN_TRIG_EDGE                   0x02
-#define EN_VBIAS_XTAL_TEMP             0x02
+#define EN_VINTCORE12          0x04
+#define EN_VTVOUT              0x02
+#define EN_GPADC               0x01
+#define DIS_GPADC              0x00
+#define AVG_1                  0x00
+#define AVG_4                  0x20
+#define AVG_8                  0x40
+#define AVG_16                 0x60
+#define ADC_SW_CONV            0x04
+#define EN_ICHAR               0x80
+#define BTEMP_PULL_UP          0x08
+#define EN_BUF                 0x40
+#define DIS_ZERO               0x00
+#define GPADC_BUSY             0x01
+#define EN_FALLING             0x10
+#define EN_TRIG_EDGE           0x02
+#define EN_VBIAS_XTAL_TEMP     0x02
 
 /* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION                 1024
-#define ADC_CH_BTEMP_MIN               0
-#define ADC_CH_BTEMP_MAX               1350
-#define ADC_CH_DIETEMP_MIN             0
-#define ADC_CH_DIETEMP_MAX             1350
-#define ADC_CH_CHG_V_MIN               0
-#define ADC_CH_CHG_V_MAX               20030
-#define ADC_CH_ACCDET2_MIN             0
-#define ADC_CH_ACCDET2_MAX             2500
-#define ADC_CH_VBAT_MIN                        2300
-#define ADC_CH_VBAT_MAX                        4800
-#define ADC_CH_CHG_I_MIN               0
-#define ADC_CH_CHG_I_MAX               1500
-#define ADC_CH_BKBAT_MIN               0
-#define ADC_CH_BKBAT_MAX               3200
+#define ADC_RESOLUTION         1024
+#define ADC_CH_BTEMP_MIN       0
+#define ADC_CH_BTEMP_MAX       1350
+#define ADC_CH_DIETEMP_MIN     0
+#define ADC_CH_DIETEMP_MAX     1350
+#define ADC_CH_CHG_V_MIN       0
+#define ADC_CH_CHG_V_MAX       20030
+#define ADC_CH_ACCDET2_MIN     0
+#define ADC_CH_ACCDET2_MAX     2500
+#define ADC_CH_VBAT_MIN                2300
+#define ADC_CH_VBAT_MAX                4800
+#define ADC_CH_CHG_I_MIN       0
+#define ADC_CH_CHG_I_MAX       1500
+#define ADC_CH_BKBAT_MIN       0
+#define ADC_CH_BKBAT_MAX       3200
 
 /* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX                        6000
-#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX_V              60
-#define IBAT_VDROP_L                   (-56)  /* mV */
-#define IBAT_VDROP_H                   56
+#define ADC_CH_IBAT_MIN                (-6000) /* mA range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX                6000
+#define ADC_CH_IBAT_MIN_V      (-60)   /* mV range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX_V      60
+#define IBAT_VDROP_L           (-56)  /* mV */
+#define IBAT_VDROP_H           56
 
 /* This is used to not lose precision when dividing to get gain and offset */
 #define CALIB_SCALE            1000
@@ -179,7 +179,7 @@ struct ab8500_gpadc *ab8500_gpadc_get(char *name)
 
        list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
                if (!strcmp(name, dev_name(gpadc->dev)))
-                   return gpadc;
+                       return gpadc;
        }
 
        return ERR_PTR(-ENOENT);
@@ -315,11 +315,12 @@ int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
 
        ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
                        trig_edge, trig_timer, conv_type);
-/* On failure retry a second time */
+
+       /* On failure retry a second time */
        if (ad_value < 0)
                ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
                        trig_edge, trig_timer, conv_type);
-if (ad_value < 0) {
+       if (ad_value < 0) {
                dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
                                channel);
                return ad_value;
@@ -327,8 +328,9 @@ if (ad_value < 0) {
 
        voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
        if (voltage < 0)
-               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
-                       " %d AD: 0x%x\n", channel, ad_value);
+               dev_err(gpadc->dev,
+                       "GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
+                       channel, ad_value);
 
        return voltage;
 }
@@ -348,10 +350,9 @@ EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
 int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
                u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
 {
-       int raw_data;
-       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
-                       avg_sample, trig_edge, trig_timer, conv_type, NULL);
-       return raw_data;
+       return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
+                                           trig_edge, trig_timer, conv_type,
+                                           NULL);
 }
 
 int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
@@ -388,7 +389,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
                        goto out;
                if (!(val & GPADC_BUSY))
                        break;
-               msleep(10);
+               msleep(20);
        } while (++looplimit < 10);
        if (looplimit >= 10 && (val & GPADC_BUSY)) {
                dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
@@ -421,8 +422,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
                val_reg1 |= EN_TRIG_EDGE;
                if (trig_edge)
                        val_reg1 |= EN_FALLING;
-       }
-       else
+       } else
                ret = abx500_set_register_interruptible(gpadc->dev,
                                AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
        if (ret < 0) {
@@ -449,7 +449,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
                        * remove when hardware will be availible
                        */
                        delay_min = 1000; /* Delay in micro seconds */
-                       delay_max = 10000; /* large range to optimise sleep mode */
+                       delay_max = 10000; /* large range optimises sleepmode */
                        break;
                }
                /* Intentional fallthrough */
@@ -785,9 +785,10 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
                                << CALIB_SHIFT_IBAT)
                                / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
 
-                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
-                       gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
-                               V2A_gain + V2A_offset;
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain =
+                               V_gain * V2A_gain;
+                       gpadc->cal_data[ADC_INPUT_IBAT].offset =
+                               V_offset * V2A_gain + V2A_offset;
                } else {
                        gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
                }
@@ -923,11 +924,10 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
        int ret = 0;
        struct ab8500_gpadc *gpadc;
 
-       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);
-       if (!gpadc) {
-               dev_err(&pdev->dev, "Error: No memory\n");
+       gpadc = devm_kzalloc(&pdev->dev,
+                            sizeof(struct ab8500_gpadc), GFP_KERNEL);
+       if (!gpadc)
                return -ENOMEM;
-       }
 
        gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
        if (gpadc->irq_sw < 0)
@@ -1072,18 +1072,19 @@ void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
        *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
        *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
        *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-       *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-       *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-       *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-       *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-       return ;
+       *vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+       *vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+       *ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+       *ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
 }
 
 subsys_initcall_sync(ab8500_gpadc_init);
 module_exit(ab8500_gpadc_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
-               "M'boumba Cedric Madianga");
+MODULE_AUTHOR("Arun R Murthy");
+MODULE_AUTHOR("Daniel Willerud");
+MODULE_AUTHOR("Johan Palsson");
+MODULE_AUTHOR("M'boumba Cedric Madianga");
 MODULE_ALIAS("platform:ab8500_gpadc");
 MODULE_DESCRIPTION("AB8500 GPADC driver");