AT91 MMC 4 : Interrupt handler cleanup

This patch simplifies the AT91RM9200 MMC interrupt handler code so that
it doesn't re-read the Interrupt Status and Interrupt Mask registers
multiple times.

Also defined AT91_MCI_ERRORS instead of using the hard-coded 0xffff0000.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 567119e93dffeb6c1ebe6b50f10dcccadd2c34eb..2f11d67d8d07ad6cbc0403d8e086efd433192873 100644 (file)
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -80,10 +80,12 @@
 
 #undef SUPPORT_4WIRE
 
-#define FL_SENT_COMMAND (1 << 0)
-#define FL_SENT_STOP (1 << 1)
-
+#define FL_SENT_COMMAND        (1 << 0)
+#define FL_SENT_STOP   (1 << 1)
 
+#define AT91_MCI_ERRORS        (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE       \
+               | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE               \
+               | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)                        
 
 #define at91_mci_read(host, reg)       __raw_readl((host)->baseaddr + (reg))
 #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
@@ -507,7 +509,7 @@ static void at91mci_process_command(struct at91mci_host *host, struct mmc_comman
        pr_debug("setting ier to %08X\n", ier);
 
        /* Stop on errors or the required value */
-       at91_mci_write(host, AT91_MCI_IER, 0xffff0000 | ier);
+       at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
 }
 
 /*
@@ -652,39 +654,40 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 {
        struct at91mci_host *host = devid;
        int completed = 0;
-
-       unsigned int int_status;
+       unsigned int int_status, int_mask;
 
        int_status = at91_mci_read(host, AT91_MCI_SR);
-       pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(host, AT91_MCI_IMR),
-               int_status & at91_mci_read(host, AT91_MCI_IMR));
-
-       if ((int_status & at91_mci_read(host, AT91_MCI_IMR)) & 0xffff0000)
+       int_mask = at91_mci_read(host, AT91_MCI_IMR);
+       
+       pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, int_mask,
+               int_status & int_mask);
+       
+       int_status = int_status & int_mask;
+
+       if (int_status & AT91_MCI_ERRORS) {
                completed = 1;
+               
+               if (int_status & AT91_MCI_UNRE)
+                       pr_debug("MMC: Underrun error\n");
+               if (int_status & AT91_MCI_OVRE)
+                       pr_debug("MMC: Overrun error\n");
+               if (int_status & AT91_MCI_DTOE)
+                       pr_debug("MMC: Data timeout\n");
+               if (int_status & AT91_MCI_DCRCE)
+                       pr_debug("MMC: CRC error in data\n");
+               if (int_status & AT91_MCI_RTOE)
+                       pr_debug("MMC: Response timeout\n");
+               if (int_status & AT91_MCI_RENDE)
+                       pr_debug("MMC: Response end bit error\n");
+               if (int_status & AT91_MCI_RCRCE)
+                       pr_debug("MMC: Response CRC error\n");
+               if (int_status & AT91_MCI_RDIRE)
+                       pr_debug("MMC: Response direction error\n");
+               if (int_status & AT91_MCI_RINDE)
+                       pr_debug("MMC: Response index error\n");
+       } else {
+               /* Only continue processing if no errors */
 
-       int_status &= at91_mci_read(host, AT91_MCI_IMR);
-
-       if (int_status & AT91_MCI_UNRE)
-               pr_debug("MMC: Underrun error\n");
-       if (int_status & AT91_MCI_OVRE)
-               pr_debug("MMC: Overrun error\n");
-       if (int_status & AT91_MCI_DTOE)
-               pr_debug("MMC: Data timeout\n");
-       if (int_status & AT91_MCI_DCRCE)
-               pr_debug("MMC: CRC error in data\n");
-       if (int_status & AT91_MCI_RTOE)
-               pr_debug("MMC: Response timeout\n");
-       if (int_status & AT91_MCI_RENDE)
-               pr_debug("MMC: Response end bit error\n");
-       if (int_status & AT91_MCI_RCRCE)
-               pr_debug("MMC: Response CRC error\n");
-       if (int_status & AT91_MCI_RDIRE)
-               pr_debug("MMC: Response direction error\n");
-       if (int_status & AT91_MCI_RINDE)
-               pr_debug("MMC: Response index error\n");
-
-       /* Only continue processing if no errors */
-       if (!completed) {
                if (int_status & AT91_MCI_TXBUFE) {
                        pr_debug("TX buffer empty\n");
                        at91_mci_handle_transmitted(host);
@@ -695,9 +698,8 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
                        at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
                }
 
-               if (int_status & AT91_MCI_ENDTX) {
+               if (int_status & AT91_MCI_ENDTX)
                        pr_debug("Transmit has ended\n");
-               }
 
                if (int_status & AT91_MCI_ENDRX) {
                        pr_debug("Receive has ended\n");
@@ -709,34 +711,30 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
                        at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
                }
 
-               if (int_status & AT91_MCI_DTIP) {
+               if (int_status & AT91_MCI_DTIP)
                        pr_debug("Data transfer in progress\n");
-               }
 
-               if (int_status & AT91_MCI_BLKE) {
+               if (int_status & AT91_MCI_BLKE)
                        pr_debug("Block transfer has ended\n");
-               }
 
-               if (int_status & AT91_MCI_TXRDY) {
+               if (int_status & AT91_MCI_TXRDY)
                        pr_debug("Ready to transmit\n");
-               }
 
-               if (int_status & AT91_MCI_RXRDY) {
+               if (int_status & AT91_MCI_RXRDY)
                        pr_debug("Ready to receive\n");
-               }
 
                if (int_status & AT91_MCI_CMDRDY) {
                        pr_debug("Command ready\n");
                        completed = 1;
                }
        }
-       at91_mci_write(host, AT91_MCI_IDR, int_status);
 
        if (completed) {
                pr_debug("Completed command\n");
                at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
                at91mci_completed_command(host);
-       }
+       } else
+               at91_mci_write(host, AT91_MCI_IDR, int_status);
 
        return IRQ_HANDLED;
 }