MIPS: mm: compile maar_init unconditionally

maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES
was not set, which has been fine since it is only called from the
standard implementation of mem_init which has the same condition. In
preparation for calling it from the SMP startup code on secondary CPUs,
move maar_init outside of the #ifndef such that it is always compiled.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/11237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 66d0f49c5bec4bab02d8e2e194570527d9ccd4e8..074ac545902663b69e1319ad2f8efe18de77637c 100644 (file)
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -252,6 +252,69 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 #endif
 }
 
+unsigned __weak platform_maar_init(unsigned num_pairs)
+{
+       struct maar_config cfg[BOOT_MEM_MAP_MAX];
+       unsigned i, num_configured, num_cfg = 0;
+       phys_addr_t skip;
+
+       for (i = 0; i < boot_mem_map.nr_map; i++) {
+               switch (boot_mem_map.map[i].type) {
+               case BOOT_MEM_RAM:
+               case BOOT_MEM_INIT_RAM:
+                       break;
+               default:
+                       continue;
+               }
+
+               skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+               cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+               cfg[num_cfg].lower += skip;
+
+               cfg[num_cfg].upper = cfg[num_cfg].lower;
+               cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+               cfg[num_cfg].upper -= skip;
+
+               cfg[num_cfg].attrs = MIPS_MAAR_S;
+               num_cfg++;
+       }
+
+       num_configured = maar_config(cfg, num_cfg, num_pairs);
+       if (num_configured < num_cfg)
+               pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+                       num_pairs, num_cfg);
+
+       return num_configured;
+}
+
+static void maar_init(void)
+{
+       unsigned num_maars, used, i;
+
+       if (!cpu_has_maar)
+               return;
+
+       /* Detect the number of MAARs */
+       write_c0_maari(~0);
+       back_to_back_c0_hazard();
+       num_maars = read_c0_maari() + 1;
+
+       /* MAARs should be in pairs */
+       WARN_ON(num_maars % 2);
+
+       /* Configure the required MAARs */
+       used = platform_maar_init(num_maars / 2);
+
+       /* Disable any further MAARs */
+       for (i = (used * 2); i < num_maars; i++) {
+               write_c0_maari(i);
+               back_to_back_c0_hazard();
+               write_c0_maar(0);
+               back_to_back_c0_hazard();
+       }
+}
+
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int page_is_ram(unsigned long pagenr)
 {
@@ -334,69 +397,6 @@ static inline void mem_init_free_highmem(void)
 #endif
 }
 
-unsigned __weak platform_maar_init(unsigned num_pairs)
-{
-       struct maar_config cfg[BOOT_MEM_MAP_MAX];
-       unsigned i, num_configured, num_cfg = 0;
-       phys_addr_t skip;
-
-       for (i = 0; i < boot_mem_map.nr_map; i++) {
-               switch (boot_mem_map.map[i].type) {
-               case BOOT_MEM_RAM:
-               case BOOT_MEM_INIT_RAM:
-                       break;
-               default:
-                       continue;
-               }
-
-               skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
-               cfg[num_cfg].lower = boot_mem_map.map[i].addr;
-               cfg[num_cfg].lower += skip;
-
-               cfg[num_cfg].upper = cfg[num_cfg].lower;
-               cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
-               cfg[num_cfg].upper -= skip;
-
-               cfg[num_cfg].attrs = MIPS_MAAR_S;
-               num_cfg++;
-       }
-
-       num_configured = maar_config(cfg, num_cfg, num_pairs);
-       if (num_configured < num_cfg)
-               pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
-                       num_pairs, num_cfg);
-
-       return num_configured;
-}
-
-static void maar_init(void)
-{
-       unsigned num_maars, used, i;
-
-       if (!cpu_has_maar)
-               return;
-
-       /* Detect the number of MAARs */
-       write_c0_maari(~0);
-       back_to_back_c0_hazard();
-       num_maars = read_c0_maari() + 1;
-
-       /* MAARs should be in pairs */
-       WARN_ON(num_maars % 2);
-
-       /* Configure the required MAARs */
-       used = platform_maar_init(num_maars / 2);
-
-       /* Disable any further MAARs */
-       for (i = (used * 2); i < num_maars; i++) {
-               write_c0_maari(i);
-               back_to_back_c0_hazard();
-               write_c0_maar(0);
-               back_to_back_c0_hazard();
-       }
-}
-
 void __init mem_init(void)
 {
 #ifdef CONFIG_HIGHMEM