--- /dev/null
+/*
+ * Host communication command constants for ChromeOS EC
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The ChromeOS EC multi function device is used to mux all the requests
+ * to the EC device for its multiple features: keyboard controller,
+ * battery charging and regulator control, firmware update.
+ *
+ * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
+ * project in an attempt to make future updates easy to make.
+ */
+
+#ifndef __CROS_EC_COMMANDS_H
+#define __CROS_EC_COMMANDS_H
+
+/*
+ * Protocol overview
+ *
+ * request: CMD [ P0 P1 P2 ... Pn S ]
+ * response: ERR [ P0 P1 P2 ... Pn S ]
+ *
+ * where the bytes are defined as follow :
+ * - CMD is the command code. (defined by EC_CMD_ constants)
+ * - ERR is the error code. (defined by EC_RES_ constants)
+ * - Px is the optional payload.
+ * it is not sent if the error code is not success.
+ * (defined by ec_params_ and ec_response_ structures)
+ * - S is the checksum which is the sum of all payload bytes.
+ *
+ * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD
+ * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM.
+ * On I2C, all bytes are sent serially in the same message.
+ */
+
+/* Current version of this protocol */
+#define EC_PROTO_VERSION 0x00000002
+
+/* Command version mask */
+#define EC_VER_MASK(version) (1UL << (version))
+
+/* I/O addresses for ACPI commands */
+#define EC_LPC_ADDR_ACPI_DATA 0x62
+#define EC_LPC_ADDR_ACPI_CMD 0x66
+
+/* I/O addresses for host command */
+#define EC_LPC_ADDR_HOST_DATA 0x200
+#define EC_LPC_ADDR_HOST_CMD 0x204
+
+/* I/O addresses for host command args and params */
+#define EC_LPC_ADDR_HOST_ARGS 0x800
+#define EC_LPC_ADDR_HOST_PARAM 0x804
+#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */
+
+/* I/O addresses for host command params, old interface */
+#define EC_LPC_ADDR_OLD_PARAM 0x880
+#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */
+
+/* EC command register bit functions */
+#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */
+#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */
+
+#define EC_LPC_ADDR_MEMMAP 0x900
+#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */
+#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */
+
+/* The offset address of each type of data in mapped memory. */
+#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */
+#define EC_MEMMAP_FAN 0x10 /* Fan speeds */
+#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */
+#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */
+#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */
+#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */
+#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */
+#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
+#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */
+#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */
+#define EC_MEMMAP_SWITCHES 0x30
+#define EC_MEMMAP_HOST_EVENTS 0x34
+#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */
+#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */
+#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */
+#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */
+#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */
+#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */
+#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */
+#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */
+#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */
+#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */
+#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */
+#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */
+
+/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
+#define EC_TEMP_SENSOR_ENTRIES 16
+/*
+ * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B.
+ *
+ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
+ */
+#define EC_TEMP_SENSOR_B_ENTRIES 8
+#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
+#define EC_TEMP_SENSOR_ERROR 0xfe
+#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
+#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc
+/*
+ * The offset of temperature value stored in mapped memory. This allows
+ * reporting a temperature range of 200K to 454K = -73C to 181C.
+ */
+#define EC_TEMP_SENSOR_OFFSET 200
+
+#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */
+#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */
+#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */
+
+/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */
+#define EC_BATT_FLAG_AC_PRESENT 0x01
+#define EC_BATT_FLAG_BATT_PRESENT 0x02
+#define EC_BATT_FLAG_DISCHARGING 0x04
+#define EC_BATT_FLAG_CHARGING 0x08
+#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
+
+/* Switch flags at EC_MEMMAP_SWITCHES */
+#define EC_SWITCH_LID_OPEN 0x01
+#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02
+#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
+/* Recovery requested via keyboard */
+#define EC_SWITCH_KEYBOARD_RECOVERY 0x08
+/* Recovery requested via dedicated signal (from servo board) */
+#define EC_SWITCH_DEDICATED_RECOVERY 0x10
+/* Was fake developer mode switch; now unused. Remove in next refactor. */
+#define EC_SWITCH_IGNORE0 0x20
+
+/* Host command interface flags */
+/* Host command interface supports LPC args (LPC interface only) */
+#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01
+
+/* Wireless switch flags */
+#define EC_WIRELESS_SWITCH_WLAN 0x01
+#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+
+/*
+ * This header file is used in coreboot both in C and ACPI code. The ACPI code
+ * is pre-processed to handle constants but the ASL compiler is unable to
+ * handle actual C code so keep it separate.
+ */
+#ifndef __ACPI__
+
+/* LPC command status byte masks */
+/* EC has written a byte in the data register and host hasn't read it yet */
+#define EC_LPC_STATUS_TO_HOST 0x01
+/* Host has written a command/data byte and the EC hasn't read it yet */
+#define EC_LPC_STATUS_FROM_HOST 0x02
+/* EC is processing a command */
+#define EC_LPC_STATUS_PROCESSING 0x04
+/* Last write to EC was a command, not data */
+#define EC_LPC_STATUS_LAST_CMD 0x08
+/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */
+#define EC_LPC_STATUS_BURST_MODE 0x10
+/* SCI event is pending (requesting SCI query) */
+#define EC_LPC_STATUS_SCI_PENDING 0x20
+/* SMI event is pending (requesting SMI query) */
+#define EC_LPC_STATUS_SMI_PENDING 0x40
+/* (reserved) */
+#define EC_LPC_STATUS_RESERVED 0x80
+
+/*
+ * EC is busy. This covers both the EC processing a command, and the host has
+ * written a new command but the EC hasn't picked it up yet.
+ */
+#define EC_LPC_STATUS_BUSY_MASK \
+ (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
+
+/* Host command response codes */
+enum ec_status {
+ EC_RES_SUCCESS = 0,
+ EC_RES_INVALID_COMMAND = 1,
+ EC_RES_ERROR = 2,
+ EC_RES_INVALID_PARAM = 3,
+ EC_RES_ACCESS_DENIED = 4,
+ EC_RES_INVALID_RESPONSE = 5,
+ EC_RES_INVALID_VERSION = 6,
+ EC_RES_INVALID_CHECKSUM = 7,
+ EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */
+ EC_RES_UNAVAILABLE = 9, /* No response available */
+ EC_RES_TIMEOUT = 10, /* We got a timeout */
+ EC_RES_OVERFLOW = 11, /* Table / data overflow */
+};
+
+/*
+ * Host event codes. Note these are 1-based, not 0-based, because ACPI query
+ * EC command uses code 0 to mean "no event pending". We explicitly specify
+ * each value in the enum listing so they won't change if we delete/insert an
+ * item or rearrange the list (it needs to be stable across platforms, not
+ * just within a single compiled instance).
+ */
+enum host_event_code {
+ EC_HOST_EVENT_LID_CLOSED = 1,
+ EC_HOST_EVENT_LID_OPEN = 2,
+ EC_HOST_EVENT_POWER_BUTTON = 3,
+ EC_HOST_EVENT_AC_CONNECTED = 4,
+ EC_HOST_EVENT_AC_DISCONNECTED = 5,
+ EC_HOST_EVENT_BATTERY_LOW = 6,
+ EC_HOST_EVENT_BATTERY_CRITICAL = 7,
+ EC_HOST_EVENT_BATTERY = 8,
+ EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
+ EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+ EC_HOST_EVENT_THERMAL = 11,
+ EC_HOST_EVENT_USB_CHARGER = 12,
+ EC_HOST_EVENT_KEY_PRESSED = 13,
+ /*
+ * EC has finished initializing the host interface. The host can check
+ * for this event following sending a EC_CMD_REBOOT_EC command to
+ * determine when the EC is ready to accept subsequent commands.
+ */
+ EC_HOST_EVENT_INTERFACE_READY = 14,
+ /* Keyboard recovery combo has been pressed */
+ EC_HOST_EVENT_KEYBOARD_RECOVERY = 15,
+
+ /* Shutdown due to thermal overload */
+ EC_HOST_EVENT_THERMAL_SHUTDOWN = 16,
+ /* Shutdown due to battery level too low */
+ EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
+
+ /*
+ * The high bit of the event mask is not used as a host event code. If
+ * it reads back as set, then the entire event mask should be
+ * considered invalid by the host. This can happen when reading the
+ * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is
+ * not initialized on the EC, or improperly configured on the host.
+ */
+ EC_HOST_EVENT_INVALID = 32
+};
+/* Host event mask */
+#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+
+/* Arguments at EC_LPC_ADDR_HOST_ARGS */
+struct ec_lpc_host_args {
+ uint8_t flags;
+ uint8_t command_version;
+ uint8_t data_size;
+ /*
+ * Checksum; sum of command + flags + command_version + data_size +
+ * all params/response data bytes.
+ */
+ uint8_t checksum;
+} __packed;
+
+/* Flags for ec_lpc_host_args.flags */
+/*
+ * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command
+ * params.
+ *
+ * If EC gets a command and this flag is not set, this is an old-style command.
+ * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
+ * unknown length. EC must respond with an old-style response (that is,
+ * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ */
+#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
+/*
+ * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response.
+ *
+ * If EC responds to a command and this flag is not set, this is an old-style
+ * response. Command version is 0 and response data from EC is at
+ * EC_LPC_ADDR_OLD_PARAM with unknown length.
+ */
+#define EC_HOST_ARGS_FLAG_TO_HOST 0x02
+
+/*
+ * Notes on commands:
+ *
+ * Each command is an 8-byte command value. Commands which take params or
+ * return response data specify structs for that data. If no struct is
+ * specified, the command does not input or output data, respectively.
+ * Parameter/response length is implicit in the structs. Some underlying
+ * communication protocols (I2C, SPI) may add length or checksum headers, but
+ * those are implementation-dependent and not defined here.
+ */
+
+/*****************************************************************************/
+/* General / test commands */
+
+/*
+ * Get protocol version, used to deal with non-backward compatible protocol
+ * changes.
+ */
+#define EC_CMD_PROTO_VERSION 0x00
+
+struct ec_response_proto_version {
+ uint32_t version;
+} __packed;
+
+/*
+ * Hello. This is a simple command to test the EC is responsive to
+ * commands.
+ */
+#define EC_CMD_HELLO 0x01
+
+struct ec_params_hello {
+ uint32_t in_data; /* Pass anything here */
+} __packed;
+
+struct ec_response_hello {
+ uint32_t out_data; /* Output will be in_data + 0x01020304 */
+} __packed;
+
+/* Get version number */
+#define EC_CMD_GET_VERSION 0x02
+
+enum ec_current_image {
+ EC_IMAGE_UNKNOWN = 0,
+ EC_IMAGE_RO,
+ EC_IMAGE_RW
+};
+
+struct ec_response_get_version {
+ /* Null-terminated version strings for RO, RW */
+ char version_string_ro[32];
+ char version_string_rw[32];
+ char reserved[32]; /* Was previously RW-B string */
+ uint32_t current_image; /* One of ec_current_image */
+} __packed;
+
+/* Read test */
+#define EC_CMD_READ_TEST 0x03
+
+struct ec_params_read_test {
+ uint32_t offset; /* Starting value for read buffer */
+ uint32_t size; /* Size to read in bytes */
+} __packed;
+
+struct ec_response_read_test {
+ uint32_t data[32];
+} __packed;
+
+/*
+ * Get build information
+ *
+ * Response is null-terminated string.
+ */
+#define EC_CMD_GET_BUILD_INFO 0x04
+
+/* Get chip info */
+#define EC_CMD_GET_CHIP_INFO 0x05
+
+struct ec_response_get_chip_info {
+ /* Null-terminated strings */
+ char vendor[32];
+ char name[32];
+ char revision[32]; /* Mask version */
+} __packed;
+
+/* Get board HW version */
+#define EC_CMD_GET_BOARD_VERSION 0x06
+
+struct ec_response_board_version {
+ uint16_t board_version; /* A monotonously incrementing number. */
+} __packed;
+
+/*
+ * Read memory-mapped data.
+ *
+ * This is an alternate interface to memory-mapped data for bus protocols
+ * which don't support direct-mapped memory - I2C, SPI, etc.
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_READ_MEMMAP 0x07
+
+struct ec_params_read_memmap {
+ uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */
+ uint8_t size; /* Size to read in bytes */
+} __packed;
+
+/* Read versions supported for a command */
+#define EC_CMD_GET_CMD_VERSIONS 0x08
+
+struct ec_params_get_cmd_versions {
+ uint8_t cmd; /* Command to check */
+} __packed;
+
+struct ec_response_get_cmd_versions {
+ /*
+ * Mask of supported versions; use EC_VER_MASK() to compare with a
+ * desired version.
+ */
+ uint32_t version_mask;
+} __packed;
+
+/*
+ * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * on lpc since it has its own out-of-band busy indicator.
+ *
+ * lpc must read the status from the command register. Attempting this on
+ * lpc will overwrite the args/parameter space and corrupt its data.
+ */
+#define EC_CMD_GET_COMMS_STATUS 0x09
+
+/* Avoid using ec_status which is for return values */
+enum ec_comms_status {
+ EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */
+};
+
+struct ec_response_get_comms_status {
+ uint32_t flags; /* Mask of enum ec_comms_status */
+} __packed;
+
+
+/*****************************************************************************/
+/* Flash commands */
+
+/* Get flash info */
+#define EC_CMD_FLASH_INFO 0x10
+
+struct ec_response_flash_info {
+ /* Usable flash size, in bytes */
+ uint32_t flash_size;
+ /*
+ * Write block size. Write offset and size must be a multiple
+ * of this.
+ */
+ uint32_t write_block_size;
+ /*
+ * Erase block size. Erase offset and size must be a multiple
+ * of this.
+ */
+ uint32_t erase_block_size;
+ /*
+ * Protection block size. Protection offset and size must be a
+ * multiple of this.
+ */
+ uint32_t protect_block_size;
+} __packed;
+
+/*
+ * Read flash
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_FLASH_READ 0x11
+
+struct ec_params_flash_read {
+ uint32_t offset; /* Byte offset to read */
+ uint32_t size; /* Size to read in bytes */
+} __packed;
+
+/* Write flash */
+#define EC_CMD_FLASH_WRITE 0x12
+
+struct ec_params_flash_write {
+ uint32_t offset; /* Byte offset to write */
+ uint32_t size; /* Size to write in bytes */
+ /*
+ * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to
+ * use a power of 2 so writes stay aligned.
+ */
+ uint8_t data[64];
+} __packed;
+
+/* Erase flash */
+#define EC_CMD_FLASH_ERASE 0x13
+
+struct ec_params_flash_erase {
+ uint32_t offset; /* Byte offset to erase */
+ uint32_t size; /* Size to erase in bytes */
+} __packed;
+
+/*
+ * Get/set flash protection.
+ *
+ * If mask!=0, sets/clear the requested bits of flags. Depending on the
+ * firmware write protect GPIO, not all flags will take effect immediately;
+ * some flags require a subsequent hard reset to take effect. Check the
+ * returned flags bits to see what actually happened.
+ *
+ * If mask=0, simply returns the current flags state.
+ */
+#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */
+
+/* Flags for flash protection */
+/* RO flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0)
+/*
+ * RO flash code protected now. If this bit is set, at-boot status cannot
+ * be changed.
+ */
+#define EC_FLASH_PROTECT_RO_NOW (1 << 1)
+/* Entire flash code protected now, until reboot. */
+#define EC_FLASH_PROTECT_ALL_NOW (1 << 2)
+/* Flash write protect GPIO is asserted now */
+#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3)
+/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
+#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4)
+/*
+ * Error - flash protection is in inconsistent state. At least one bank of
+ * flash which should be protected is not protected. Usually fixed by
+ * re-requesting the desired flags, or by a hard reset if that fails.
+ */
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+/* Entile flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6)
+
+struct ec_params_flash_protect {
+ uint32_t mask; /* Bits in flags to apply */
+ uint32_t flags; /* New flags to apply */
+} __packed;
+
+struct ec_response_flash_protect {
+ /* Current value of flash protect flags */
+ uint32_t flags;
+ /*
+ * Flags which are valid on this platform. This allows the caller
+ * to distinguish between flags which aren't set vs. flags which can't
+ * be set on this platform.
+ */
+ uint32_t valid_flags;
+ /* Flags which can be changed given the current protection state */
+ uint32_t writable_flags;
+} __packed;
+
+/*
+ * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
+ * write protect. These commands may be reused with version > 0.
+ */
+
+/* Get the region offset/size */
+#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_VER_FLASH_REGION_INFO 1
+
+enum ec_flash_region {
+ /* Region which holds read-only EC image */
+ EC_FLASH_REGION_RO,
+ /* Region which holds rewritable EC image */
+ EC_FLASH_REGION_RW,
+ /*
+ * Region which should be write-protected in the factory (a superset of
+ * EC_FLASH_REGION_RO)
+ */
+ EC_FLASH_REGION_WP_RO,
+};
+
+struct ec_params_flash_region_info {
+ uint32_t region; /* enum ec_flash_region */
+} __packed;
+
+struct ec_response_flash_region_info {
+ uint32_t offset;
+ uint32_t size;
+} __packed;
+
+/* Read/write VbNvContext */
+#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_VER_VBNV_CONTEXT 1
+#define EC_VBNV_BLOCK_SIZE 16
+
+enum ec_vbnvcontext_op {
+ EC_VBNV_CONTEXT_OP_READ,
+ EC_VBNV_CONTEXT_OP_WRITE,
+};
+
+struct ec_params_vbnvcontext {
+ uint32_t op;
+ uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+struct ec_response_vbnvcontext {
+ uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+/*****************************************************************************/
+/* PWM commands */
+
+/* Get fan target RPM */
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+
+struct ec_response_pwm_get_fan_rpm {
+ uint32_t rpm;
+} __packed;
+
+/* Set target fan RPM */
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+
+struct ec_params_pwm_set_fan_target_rpm {
+ uint32_t rpm;
+} __packed;
+
+/* Get keyboard backlight */
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+
+struct ec_response_pwm_get_keyboard_backlight {
+ uint8_t percent;
+ uint8_t enabled;
+} __packed;
+
+/* Set keyboard backlight */
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+
+struct ec_params_pwm_set_keyboard_backlight {
+ uint8_t percent;
+} __packed;
+
+/* Set target fan PWM duty cycle */
+#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+
+struct ec_params_pwm_set_fan_duty {
+ uint32_t percent;
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Lightbar commands. This looks worse than it is. Since we only use one HOST
+ * command to say "talk to the lightbar", we put the "and tell it to do X" part
+ * into a subcommand. We'll make separate structs for subcommands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_LIGHTBAR_CMD 0x28
+
+struct rgb_s {
+ uint8_t r, g, b;
+};
+
+#define LB_BATTERY_LEVELS 4
+/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
+ * host command, but the alignment is the same regardless. Keep it that way.
+ */
+struct lightbar_params {
+ /* Timing */
+ int google_ramp_up;
+ int google_ramp_down;
+ int s3s0_ramp_up;
+ int s0_tick_delay[2]; /* AC=0/1 */
+ int s0a_tick_delay[2]; /* AC=0/1 */
+ int s0s3_ramp_down;
+ int s3_sleep_for;
+ int s3_ramp_up;
+ int s3_ramp_down;
+
+ /* Oscillation */
+ uint8_t new_s0;
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+} __packed;
+
+struct ec_params_lightbar {
+ uint8_t cmd; /* Command (see enum lightbar_command) */
+ union {
+ struct {
+ /* no args */
+ } dump, off, on, init, get_seq, get_params;
+
+ struct num {
+ uint8_t num;
+ } brightness, seq, demo;
+
+ struct reg {
+ uint8_t ctrl, reg, value;
+ } reg;
+
+ struct rgb {
+ uint8_t led, red, green, blue;
+ } rgb;
+
+ struct lightbar_params set_params;
+ };
+} __packed;
+
+struct ec_response_lightbar {
+ union {
+ struct dump {
+ struct {
+ uint8_t reg;
+ uint8_t ic0;
+ uint8_t ic1;
+ } vals[23];
+ } dump;
+
+ struct get_seq {
+ uint8_t num;
+ } get_seq;
+
+ struct lightbar_params get_params;
+
+ struct {
+ /* no return params */
+ } off, on, init, brightness, seq, reg, rgb, demo, set_params;
+ };
+} __packed;
+
+/* Lightbar commands */
+enum lightbar_command {
+ LIGHTBAR_CMD_DUMP = 0,
+ LIGHTBAR_CMD_OFF = 1,
+ LIGHTBAR_CMD_ON = 2,
+ LIGHTBAR_CMD_INIT = 3,
+ LIGHTBAR_CMD_BRIGHTNESS = 4,
+ LIGHTBAR_CMD_SEQ = 5,
+ LIGHTBAR_CMD_REG = 6,
+ LIGHTBAR_CMD_RGB = 7,
+ LIGHTBAR_CMD_GET_SEQ = 8,
+ LIGHTBAR_CMD_DEMO = 9,
+ LIGHTBAR_CMD_GET_PARAMS = 10,
+ LIGHTBAR_CMD_SET_PARAMS = 11,
+ LIGHTBAR_NUM_CMDS
+};
+
+/*****************************************************************************/
+/* Verified boot commands */
+
+/*
+ * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be
+ * reused for other purposes with version > 0.
+ */
+
+/* Verified boot hash command */
+#define EC_CMD_VBOOT_HASH 0x2A
+
+struct ec_params_vboot_hash {
+ uint8_t cmd; /* enum ec_vboot_hash_cmd */
+ uint8_t hash_type; /* enum ec_vboot_hash_type */
+ uint8_t nonce_size; /* Nonce size; may be 0 */
+ uint8_t reserved0; /* Reserved; set 0 */
+ uint32_t offset; /* Offset in flash to hash */
+ uint32_t size; /* Number of bytes to hash */
+ uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */
+} __packed;
+
+struct ec_response_vboot_hash {
+ uint8_t status; /* enum ec_vboot_hash_status */
+ uint8_t hash_type; /* enum ec_vboot_hash_type */
+ uint8_t digest_size; /* Size of hash digest in bytes */
+ uint8_t reserved0; /* Ignore; will be 0 */
+ uint32_t offset; /* Offset in flash which was hashed */
+ uint32_t size; /* Number of bytes hashed */
+ uint8_t hash_digest[64]; /* Hash digest data */
+} __packed;
+
+enum ec_vboot_hash_cmd {
+ EC_VBOOT_HASH_GET = 0, /* Get current hash status */
+ EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */
+ EC_VBOOT_HASH_START = 2, /* Start computing a new hash */
+ EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */
+};
+
+enum ec_vboot_hash_type {
+ EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */
+};
+
+enum ec_vboot_hash_status {
+ EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */
+ EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */
+ EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */
+};
+
+/*
+ * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC.
+ * If one of these is specified, the EC will automatically update offset and
+ * size to the correct values for the specified image (RO or RW).
+ */
+#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+
+/*****************************************************************************/
+/* USB charging control commands */
+
+/* Set USB port charging mode */
+#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+
+struct ec_params_usb_charge_set_mode {
+ uint8_t usb_port_id;
+ uint8_t mode;
+} __packed;
+
+/*****************************************************************************/
+/* Persistent storage for host */
+
+/* Maximum bytes that can be read/written in a single command */
+#define EC_PSTORE_SIZE_MAX 64
+
+/* Get persistent storage info */
+#define EC_CMD_PSTORE_INFO 0x40
+
+struct ec_response_pstore_info {
+ /* Persistent storage size, in bytes */
+ uint32_t pstore_size;
+ /* Access size; read/write offset and size must be a multiple of this */
+ uint32_t access_size;
+} __packed;
+
+/*
+ * Read persistent storage
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_PSTORE_READ 0x41
+
+struct ec_params_pstore_read {
+ uint32_t offset; /* Byte offset to read */
+ uint32_t size; /* Size to read in bytes */
+} __packed;
+
+/* Write persistent storage */
+#define EC_CMD_PSTORE_WRITE 0x42
+
+struct ec_params_pstore_write {
+ uint32_t offset; /* Byte offset to write */
+ uint32_t size; /* Size to write in bytes */
+ uint8_t data[EC_PSTORE_SIZE_MAX];
+} __packed;
+
+/*****************************************************************************/
+/* Real-time clock */
+
+/* RTC params and response structures */
+struct ec_params_rtc {
+ uint32_t time;
+} __packed;
+
+struct ec_response_rtc {
+ uint32_t time;
+} __packed;
+
+/* These use ec_response_rtc */
+#define EC_CMD_RTC_GET_VALUE 0x44
+#define EC_CMD_RTC_GET_ALARM 0x45
+
+/* These all use ec_params_rtc */
+#define EC_CMD_RTC_SET_VALUE 0x46
+#define EC_CMD_RTC_SET_ALARM 0x47
+
+/*****************************************************************************/
+/* Port80 log access */
+
+/* Get last port80 code from previous boot */
+#define EC_CMD_PORT80_LAST_BOOT 0x48
+
+struct ec_response_port80_last_boot {
+ uint16_t code;
+} __packed;
+
+/*****************************************************************************/
+/* Thermal engine commands */
+
+/* Set thershold value */
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+
+struct ec_params_thermal_set_threshold {
+ uint8_t sensor_type;
+ uint8_t threshold_id;
+ uint16_t value;
+} __packed;
+
+/* Get threshold value */
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+
+struct ec_params_thermal_get_threshold {
+ uint8_t sensor_type;
+ uint8_t threshold_id;
+} __packed;
+
+struct ec_response_thermal_get_threshold {
+ uint16_t value;
+} __packed;
+
+/* Toggle automatic fan control */
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+
+/* Get TMP006 calibration data */
+#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+
+struct ec_params_tmp006_get_calibration {
+ uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_calibration {
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+} __packed;
+
+/* Set TMP006 calibration data */
+#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+
+struct ec_params_tmp006_set_calibration {
+ uint8_t index;
+ uint8_t reserved[3]; /* Reserved; set 0 */
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+} __packed;
+
+/*****************************************************************************/
+/* MKBP - Matrix KeyBoard Protocol */
+
+/*
+ * Read key state
+ *
+ * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for
+ * expected response size.
+ */
+#define EC_CMD_MKBP_STATE 0x60
+
+/* Provide information about the matrix : number of rows and columns */
+#define EC_CMD_MKBP_INFO 0x61
+
+struct ec_response_mkbp_info {
+ uint32_t rows;
+ uint32_t cols;
+ uint8_t switches;
+} __packed;
+
+/* Simulate key press */
+#define EC_CMD_MKBP_SIMULATE_KEY 0x62
+
+struct ec_params_mkbp_simulate_key {
+ uint8_t col;
+ uint8_t row;
+ uint8_t pressed;
+} __packed;
+
+/* Configure keyboard scanning */
+#define EC_CMD_MKBP_SET_CONFIG 0x64
+#define EC_CMD_MKBP_GET_CONFIG 0x65
+
+/* flags */
+enum mkbp_config_flags {
+ EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */
+};
+
+enum mkbp_config_valid {
+ EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
+ EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
+ EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
+ EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
+ EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
+ EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
+ EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
+};
+
+/* Configuration for our key scanning algorithm */
+struct ec_mkbp_config {
+ uint32_t valid_mask; /* valid fields */
+ uint8_t flags; /* some flags (enum mkbp_config_flags) */
+ uint8_t valid_flags; /* which flags are valid */
+ uint16_t scan_period_us; /* period between start of scans */
+ /* revert to interrupt mode after no activity for this long */
+ uint32_t poll_timeout_us;
+ /*
+ * minimum post-scan relax time. Once we finish a scan we check
+ * the time until we are due to start the next one. If this time is
+ * shorter this field, we use this instead.
+ */
+ uint16_t min_post_scan_delay_us;
+ /* delay between setting up output and waiting for it to settle */
+ uint16_t output_settle_us;
+ uint16_t debounce_down_us; /* time for debounce on key down */
+ uint16_t debounce_up_us; /* time for debounce on key up */
+ /* maximum depth to allow for fifo (0 = no keyscan output) */
+ uint8_t fifo_max_depth;
+} __packed;
+
+struct ec_params_mkbp_set_config {
+ struct ec_mkbp_config config;
+} __packed;
+
+struct ec_response_mkbp_get_config {
+ struct ec_mkbp_config config;
+} __packed;
+
+/* Run the key scan emulation */
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+
+enum ec_keyscan_seq_cmd {
+ EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
+ EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */
+ EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */
+ EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */
+ EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */
+};
+
+enum ec_collect_flags {
+ /*
+ * Indicates this scan was processed by the EC. Due to timing, some
+ * scans may be skipped.
+ */
+ EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
+};
+
+struct ec_collect_item {
+ uint8_t flags; /* some flags (enum ec_collect_flags) */
+};
+
+struct ec_params_keyscan_seq_ctrl {
+ uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
+ union {
+ struct {
+ uint8_t active; /* still active */
+ uint8_t num_items; /* number of items */
+ /* Current item being presented */
+ uint8_t cur_item;
+ } status;
+ struct {
+ /*
+ * Absolute time for this scan, measured from the
+ * start of the sequence.
+ */
+ uint32_t time_us;
+ uint8_t scan[0]; /* keyscan data */
+ } add;
+ struct {
+ uint8_t start_item; /* First item to return */
+ uint8_t num_items; /* Number of items to return */
+ } collect;
+ };
+} __packed;
+
+struct ec_result_keyscan_seq_ctrl {
+ union {
+ struct {
+ uint8_t num_items; /* Number of items */
+ /* Data for each item */
+ struct ec_collect_item item[0];
+ } collect;
+ };
+} __packed;
+
+/*****************************************************************************/
+/* Temperature sensor commands */
+
+/* Read temperature sensor info */
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+
+struct ec_params_temp_sensor_get_info {
+ uint8_t id;
+} __packed;
+
+struct ec_response_temp_sensor_get_info {
+ char sensor_name[32];
+ uint8_t sensor_type;
+} __packed;
+
+/*****************************************************************************/
+
+/*
+ * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
+ * commands accidentally sent to the wrong interface. See the ACPI section
+ * below.
+ */
+
+/*****************************************************************************/
+/* Host event commands */
+
+/*
+ * Host event mask params and response structures, shared by all of the host
+ * event commands below.
+ */
+struct ec_params_host_event_mask {
+ uint32_t mask;
+} __packed;
+
+struct ec_response_host_event_mask {
+ uint32_t mask;
+} __packed;
+
+/* These all use ec_response_host_event_mask */
+#define EC_CMD_HOST_EVENT_GET_B 0x87
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+
+/* These all use ec_params_host_event_mask */
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b
+#define EC_CMD_HOST_EVENT_CLEAR 0x8c
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
+#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f
+
+/*****************************************************************************/
+/* Switch commands */
+
+/* Enable/disable LCD backlight */
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+
+struct ec_params_switch_enable_backlight {
+ uint8_t enabled;
+} __packed;
+
+/* Enable/disable WLAN/Bluetooth */
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+
+struct ec_params_switch_enable_wireless {
+ uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* GPIO commands. Only available on EC if write protect has been disabled. */
+
+/* Set GPIO output value */
+#define EC_CMD_GPIO_SET 0x92
+
+struct ec_params_gpio_set {
+ char name[32];
+ uint8_t val;
+} __packed;
+
+/* Get GPIO value */
+#define EC_CMD_GPIO_GET 0x93
+
+struct ec_params_gpio_get {
+ char name[32];
+} __packed;
+struct ec_response_gpio_get {
+ uint8_t val;
+} __packed;
+
+/*****************************************************************************/
+/* I2C commands. Only available when flash write protect is unlocked. */
+
+/* Read I2C bus */
+#define EC_CMD_I2C_READ 0x94
+
+struct ec_params_i2c_read {
+ uint16_t addr;
+ uint8_t read_size; /* Either 8 or 16. */
+ uint8_t port;
+ uint8_t offset;
+} __packed;
+struct ec_response_i2c_read {
+ uint16_t data;
+} __packed;
+
+/* Write I2C bus */
+#define EC_CMD_I2C_WRITE 0x95
+
+struct ec_params_i2c_write {
+ uint16_t data;
+ uint16_t addr;
+ uint8_t write_size; /* Either 8 or 16. */
+ uint8_t port;
+ uint8_t offset;
+} __packed;
+
+/*****************************************************************************/
+/* Charge state commands. Only available when flash write protect unlocked. */
+
+/* Force charge state machine to stop in idle mode */
+#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+
+struct ec_params_force_idle {
+ uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* Console commands. Only available when flash write protect is unlocked. */
+
+/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
+#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+
+/*
+ * Read next chunk of data from saved snapshot.
+ *
+ * Response is null-terminated string. Empty string, if there is no more
+ * remaining output.
+ */
+#define EC_CMD_CONSOLE_READ 0x98
+
+/*****************************************************************************/
+
+/*
+ * Cut off battery power output if the battery supports.
+ *
+ * For unsupported battery, just don't implement this command and lets EC
+ * return EC_RES_INVALID_COMMAND.
+ */
+#define EC_CMD_BATTERY_CUT_OFF 0x99
+
+/*****************************************************************************/
+/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+
+/*
+ * Dump charge state machine context.
+ *
+ * Response is a binary dump of charge state machine context.
+ */
+#define EC_CMD_CHARGE_DUMP 0xa0
+
+/*
+ * Set maximum battery charging current.
+ */
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+
+struct ec_params_current_limit {
+ uint32_t limit;
+} __packed;
+
+/*****************************************************************************/
+/* System commands */
+
+/*
+ * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
+ * Rename to "set image" or something similar.
+ */
+#define EC_CMD_REBOOT_EC 0xd2
+
+/* Command */
+enum ec_reboot_cmd {
+ EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */
+ EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */
+ EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */
+ /* (command 3 was jump to RW-B) */
+ EC_REBOOT_COLD = 4, /* Cold-reboot */
+ EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */
+ EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */
+};
+
+/* Flags for ec_params_reboot_ec.reboot_flags */
+#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
+
+struct ec_params_reboot_ec {
+ uint8_t cmd; /* enum ec_reboot_cmd */
+ uint8_t flags; /* See EC_REBOOT_FLAG_* */
+} __packed;
+
+/*
+ * Get information on last EC panic.
+ *
+ * Returns variable-length platform-dependent panic information. See panic.h
+ * for details.
+ */
+#define EC_CMD_GET_PANIC_INFO 0xd3
+
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write address to EC_LPC_ADDR_ACPI_DATA
+ * - Wait for EC_LPC_CMDR_DATA bit to set
+ * - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x80
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write address to EC_LPC_ADDR_ACPI_DATA
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x81
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x84
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION 0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST 0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 1
+
+
+/*****************************************************************************/
+/*
+ * Special commands
+ *
+ * These do not follow the normal rules for commands. See each command for
+ * details.
+ */
+
+/*
+ * Reboot NOW
+ *
+ * This command will work even when the EC LPC interface is busy, because the
+ * reboot command is processed at interrupt level. Note that when the EC
+ * reboots, the host will reboot too, so there is no response to this command.
+ *
+ * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
+ */
+#define EC_CMD_REBOOT 0xd1 /* Think "die" */
+
+/*
+ * Resend last response (not supported on LPC).
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
+ * there was no previous command, or the previous command's response was too
+ * big to save.
+ */
+#define EC_CMD_RESEND_RESPONSE 0xdb
+
+/*
+ * This header byte on a command indicate version 0. Any header byte less
+ * than this means that we are talking to an old EC which doesn't support
+ * versioning. In that case, we assume version 0.
+ *
+ * Header bytes greater than this indicate a later version. For example,
+ * EC_CMD_VERSION0 + 1 means we are using version 1.
+ *
+ * The old EC interface must not use commands 0dc or higher.
+ */
+#define EC_CMD_VERSION0 0xdc
+
+#endif /* !__ACPI__ */
+
+#endif /* __CROS_EC_COMMANDS_H */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff