int n_ssids;
struct ieee80211_channel **channels;
u32 n_channels;
- u8 *ie;
+ const u8 *ie;
size_t ie_len;
/* internal */
* the scan state machine in stack. The scan must honour the channel
* configuration done by the regulatory agent in the wiphy's
* registered bands. The hardware (or the driver) needs to make sure
- * that power save is disabled. When the scan finishes,
- * ieee80211_scan_completed() must be called; note that it also must
- * be called when the scan cannot finish because the hardware is
- * turned off! Anything else is a bug! Returns a negative error code
- * which will be seen in userspace.
+ * that power save is disabled.
+ * The @req ie/ie_len members are rewritten by mac80211 to contain the
+ * entire IEs after the SSID, so that drivers need not look at these
+ * at all but just send them after the SSID -- mac80211 includes the
+ * (extended) supported rates and HT information (where applicable).
+ * When the scan finishes, ieee80211_scan_completed() must be called;
+ * note that it also must be called when the scan cannot finish due to
+ * any error unless this callback returned a negative error code.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
struct cfg80211_scan_request int_scan_req;
struct cfg80211_scan_request *scan_req;
struct ieee80211_channel *scan_channel;
+ const u8 *orig_ies;
+ int orig_ies_len;
int scan_channel_idx;
+ int scan_ies_len;
enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
unsigned long last_scan_completed;
u16 transaction, u16 auth_alg,
u8 *extra, size_t extra_len,
const u8 *bssid, int encrypt);
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+ const u8 *ie, size_t ie_len);
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
- u8 *ssid, size_t ssid_len,
- u8 *ie, size_t ie_len);
+ const u8 *ssid, size_t ssid_len,
+ const u8 *ie, size_t ie_len);
void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
const size_t supp_rates_len,
wiphy->privid = mac80211_wiphy_privid;
- if (!ops->hw_scan) {
- /* For hw_scan, driver needs to set these up. */
- wiphy->max_scan_ssids = 4;
-
- /* we support a maximum of 32 rates in cfg80211 */
- wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN
- - 2 - 32 /* SSID */
- - 4 - 32 /* (ext) supp rates */;
-
- }
-
/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
sizeof(struct cfg80211_bss);
local = wiphy_priv(wiphy);
+
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local +
enum ieee80211_band band;
struct net_device *mdev;
struct ieee80211_master_priv *mpriv;
- int channels, i, j;
+ int channels, i, j, max_bitrates;
/*
* generic code guarantees at least one band,
* that hw.conf.channel is assigned
*/
channels = 0;
+ max_bitrates = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
- if (sband && !local->oper_channel) {
+ if (!sband)
+ continue;
+ if (!local->oper_channel) {
/* init channel we're on */
local->hw.conf.channel =
local->oper_channel =
local->scan_channel = &sband->channels[0];
}
- if (sband)
- channels += sband->n_channels;
+ channels += sband->n_channels;
+
+ if (max_bitrates < sband->n_bitrates)
+ max_bitrates = sband->n_bitrates;
}
local->int_scan_req.n_channels = channels;
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+ /*
+ * Calculate scan IE length -- we need this to alloc
+ * memory and to subtract from the driver limit. It
+ * includes the (extended) supported rates and HT
+ * information -- SSID is the driver's responsibility.
+ */
+ local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+
+ if (!local->ops->hw_scan) {
+ /* For hw_scan, driver needs to set these up. */
+ local->hw.wiphy->max_scan_ssids = 4;
+ local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+ }
+
+ /*
+ * If the driver supports any scan IEs, then assume the
+ * limit includes the IEs mac80211 will add, otherwise
+ * leave it at zero and let the driver sort it out; we
+ * still pass our IEs to the driver but userspace will
+ * not be allowed to in that case.
+ */
+ if (local->hw.wiphy->max_scan_ie_len)
+ local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
+
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
if (WARN_ON(!local->scan_req))
return;
+ if (local->hw_scanning) {
+ kfree(local->scan_req->ie);
+ local->scan_req->ie = local->orig_ies;
+ local->scan_req->ie_len = local->orig_ies_len;
+ }
+
if (local->scan_req != &local->int_scan_req)
cfg80211_scan_done(local->scan_req, aborted);
local->scan_req = NULL;
}
if (local->ops->hw_scan) {
- int rc;
+ u8 *ies;
+ int rc, ielen;
+
+ ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
+ local->scan_ies_len + req->ie_len, GFP_KERNEL);
+ if (!ies)
+ return -ENOMEM;
+
+ ielen = ieee80211_build_preq_ies(local, ies,
+ req->ie, req->ie_len);
+ local->orig_ies = req->ie;
+ local->orig_ies_len = req->ie_len;
+ req->ie = ies;
+ req->ie_len = ielen;
local->hw_scanning = true;
rc = local->ops->hw_scan(local_to_hw(local), req);
if (rc) {
local->hw_scanning = false;
+ kfree(ies);
+ req->ie_len = local->orig_ies_len;
+ req->ie = local->orig_ies;
return rc;
}
local->scan_sdata = scan_sdata;
ieee80211_tx_skb(sdata, skb, encrypt);
}
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+ const u8 *ie, size_t ie_len)
+{
+ struct ieee80211_supported_band *sband;
+ u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
+ int i;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+ pos = buffer;
+
+ *pos++ = WLAN_EID_SUPP_RATES;
+ supp_rates_len = pos;
+ *pos++ = 0;
+
+ for (i = 0; i < sband->n_bitrates; i++) {
+ struct ieee80211_rate *rate = &sband->bitrates[i];
+
+ if (esupp_rates_len) {
+ *esupp_rates_len += 1;
+ } else if (*supp_rates_len == 8) {
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ esupp_rates_len = pos;
+ *pos++ = 1;
+ } else
+ *supp_rates_len += 1;
+
+ *pos++ = rate->bitrate / 5;
+ }
+
+ /*
+ * If adding more here, adjust code in main.c
+ * that calculates local->scan_ies_len.
+ */
+
+ if (ie) {
+ memcpy(pos, ie, ie_len);
+ pos += ie_len;
+ }
+
+ return pos - buffer;
+}
+
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
- u8 *ssid, size_t ssid_len,
- u8 *ie, size_t ie_len)
+ const u8 *ssid, size_t ssid_len,
+ const u8 *ie, size_t ie_len)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_supported_band *sband;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
- u8 *pos, *supp_rates, *esupp_rates = NULL;
- int i;
+ u8 *pos;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + 200 +
ie_len);
*pos++ = WLAN_EID_SSID;
*pos++ = ssid_len;
memcpy(pos, ssid, ssid_len);
+ pos += ssid_len;
- supp_rates = skb_put(skb, 2);
- supp_rates[0] = WLAN_EID_SUPP_RATES;
- supp_rates[1] = 0;
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
- if (esupp_rates) {
- pos = skb_put(skb, 1);
- esupp_rates[1]++;
- } else if (supp_rates[1] == 8) {
- esupp_rates = skb_put(skb, 3);
- esupp_rates[0] = WLAN_EID_EXT_SUPP_RATES;
- esupp_rates[1] = 1;
- pos = &esupp_rates[2];
- } else {
- pos = skb_put(skb, 1);
- supp_rates[1]++;
- }
- *pos = rate->bitrate / 5;
- }
-
- /* if adding more here, adjust max_scan_ie_len */
-
- if (ie)
- memcpy(skb_put(skb, ie_len), ie, ie_len);
+ skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len));
ieee80211_tx_skb(sdata, skb, 0);
}
if (info->attrs[NL80211_ATTR_IE]) {
request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
- memcpy(request->ie, nla_data(info->attrs[NL80211_ATTR_IE]),
+ memcpy((void *)request->ie,
+ nla_data(info->attrs[NL80211_ATTR_IE]),
request->ie_len);
}
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff