ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board

The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash,
and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host
port using an USB-A receptacle and a micro-usb receptacle for both power
and USB OTG.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1cd137dc69e5d87f0654e1a2ef4f4af25542cb63..d44a724c602e4b1ecc033e2a68783b3030159f8f 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -348,6 +348,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
        sun4i-a10-olinuxino-lime.dtb \
        sun4i-a10-pcduino.dtb \
        sun5i-a10s-olinuxino-micro.dtb \
+       sun5i-a10s-r7-tv-dongle.dtb \
        sun5i-a13-olinuxino.dtb \
        sun5i-a13-olinuxino-micro.dtb \
        sun6i-a31-colombus.dtb \

diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644 (file)
index 0000000..43a9376
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+       model = "R7 A10s hdmi tv-stick";
+       compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+       soc@01c00000 {
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 6 1 0>; /* PG1 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               mmc1: mmc@01c10000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc1_pins_a>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       non-removable;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               pinctrl@01c20800 {
+                       mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+                               allwinner,pins = "PG1";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <1>;
+                       };
+
+                       led_pins_r7: led_pins@0 {
+                               allwinner,pins = "PB2";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <1>;
+                               allwinner,pull = <0>;
+                       };
+
+                       usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+                               allwinner,pins = "PG13";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_r7>;
+
+               green {
+                       label = "r7-tv-dongle:green:usr";
+                       gpios = <&pio 1 2 0>;
+                       default-state = "on";
+               };
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               pinctrl-0 = <&usb1_vbus_pin_r7>;
+               gpio = <&pio 6 13 0>;
+               status = "okay";
+       };
+};