int get_vpd_params(struct adapter *adapter, struct vpd_params *p);
int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size);
unsigned int t4_flash_cfg_addr(struct adapter *adapter);
-int t4_load_cfg(struct adapter *adapter, const u8 *cfg_data, unsigned int size);
int t4_get_fw_version(struct adapter *adapter, u32 *vers);
int t4_get_tp_version(struct adapter *adapter, u32 *vers);
int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
int t4_fw_bye(struct adapter *adap, unsigned int mbox);
int t4_early_init(struct adapter *adap, unsigned int mbox);
int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset);
-int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force);
-int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset);
-int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
- const u8 *fw_data, unsigned int size, int force);
-int t4_fw_config_file(struct adapter *adap, unsigned int mbox,
- unsigned int mtype, unsigned int maddr,
- u32 *finiver, u32 *finicsum, u32 *cfcsum);
int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
unsigned int cache_line_size);
int t4_fw_initialize(struct adapter *adap, unsigned int mbox);
#include "t4_regs.h"
#include "t4fw_api.h"
+static int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
+ const u8 *fw_data, unsigned int size, int force);
/**
* t4_wait_op_done_val - wait until an operation is completed
* @adapter: the adapter performing the operation
return FLASH_CFG_START;
}
-/**
- * t4_load_cfg - download config file
- * @adap: the adapter
- * @cfg_data: the cfg text file to write
- * @size: text file size
- *
- * Write the supplied config text file to the card's serial flash.
- */
-int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
-{
- int ret, i, n;
- unsigned int addr;
- unsigned int flash_cfg_start_sec;
- unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
-
- addr = t4_flash_cfg_addr(adap);
- flash_cfg_start_sec = addr / SF_SEC_SIZE;
-
- if (size > FLASH_CFG_MAX_SIZE) {
- dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
- FLASH_CFG_MAX_SIZE);
- return -EFBIG;
- }
-
- i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */
- sf_sec_size);
- ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
- flash_cfg_start_sec + i - 1);
- /*
- * If size == 0 then we're simply erasing the FLASH sectors associated
- * with the on-adapter Firmware Configuration File.
- */
- if (ret || size == 0)
- goto out;
-
- /* this will write to the flash up to SF_PAGE_SIZE at a time */
- for (i = 0; i < size; i += SF_PAGE_SIZE) {
- if ((size - i) < SF_PAGE_SIZE)
- n = size - i;
- else
- n = SF_PAGE_SIZE;
- ret = t4_write_flash(adap, addr, n, cfg_data);
- if (ret)
- goto out;
-
- addr += SF_PAGE_SIZE;
- cfg_data += SF_PAGE_SIZE;
- }
-
-out:
- if (ret)
- dev_err(adap->pdev_dev, "config file %s failed %d\n",
- (size == 0 ? "clear" : "download"), ret);
- return ret;
-}
-
/**
* t4_load_fw - download firmware
* @adap: the adapter
* be doing. The only way out of this state is to RESTART the firmware
* ...
*/
-int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
+static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
{
int ret = 0;
* the chip since older firmware won't recognize the PCIE_FW.HALT
* flag and automatically RESET itself on startup.
*/
-int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
+static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
{
if (reset) {
/*
* positive errno indicates that the adapter is ~probably~ intact, a
* negative errno indicates that things are looking bad ...
*/
-int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
- const u8 *fw_data, unsigned int size, int force)
+static int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
+ const u8 *fw_data, unsigned int size, int force)
{
const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
int reset, ret;
return t4_fw_restart(adap, mbox, reset);
}
-
-/**
- * t4_fw_config_file - setup an adapter via a Configuration File
- * @adap: the adapter
- * @mbox: mailbox to use for the FW command
- * @mtype: the memory type where the Configuration File is located
- * @maddr: the memory address where the Configuration File is located
- * @finiver: return value for CF [fini] version
- * @finicsum: return value for CF [fini] checksum
- * @cfcsum: return value for CF computed checksum
- *
- * Issue a command to get the firmware to process the Configuration
- * File located at the specified mtype/maddress. If the Configuration
- * File is processed successfully and return value pointers are
- * provided, the Configuration File "[fini] section version and
- * checksum values will be returned along with the computed checksum.
- * It's up to the caller to decide how it wants to respond to the
- * checksums not matching but it recommended that a prominant warning
- * be emitted in order to help people rapidly identify changed or
- * corrupted Configuration Files.
- *
- * Also note that it's possible to modify things like "niccaps",
- * "toecaps",etc. between processing the Configuration File and telling
- * the firmware to use the new configuration. Callers which want to
- * do this will need to "hand-roll" their own CAPS_CONFIGS commands for
- * Configuration Files if they want to do this.
- */
-int t4_fw_config_file(struct adapter *adap, unsigned int mbox,
- unsigned int mtype, unsigned int maddr,
- u32 *finiver, u32 *finicsum, u32 *cfcsum)
-{
- struct fw_caps_config_cmd caps_cmd;
- int ret;
-
- /*
- * Tell the firmware to process the indicated Configuration File.
- * If there are no errors and the caller has provided return value
- * pointers for the [fini] section version, checksum and computed
- * checksum, pass those back to the caller.
- */
- memset(&caps_cmd, 0, sizeof(caps_cmd));
- caps_cmd.op_to_write =
- htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
- FW_CMD_REQUEST |
- FW_CMD_READ);
- caps_cmd.cfvalid_to_len16 =
- htonl(FW_CAPS_CONFIG_CMD_CFVALID |
- FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
- FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
- FW_LEN16(caps_cmd));
- ret = t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd);
- if (ret < 0)
- return ret;
-
- if (finiver)
- *finiver = ntohl(caps_cmd.finiver);
- if (finicsum)
- *finicsum = ntohl(caps_cmd.finicsum);
- if (cfcsum)
- *cfcsum = ntohl(caps_cmd.cfcsum);
-
- /*
- * And now tell the firmware to use the configuration we just loaded.
- */
- caps_cmd.op_to_write =
- htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
- FW_CMD_REQUEST |
- FW_CMD_WRITE);
- caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
- return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL);
-}
-
/**
* t4_fixup_host_params - fix up host-dependent parameters
* @adap: the adapter
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff