{ 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
{ 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
{ 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
+ { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), "6.5/5.74 D/K3 Dual FM-Stereo" },
{ 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
{ 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
{ 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
{ 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
{ 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
+ { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV3)" },
{ 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
{ 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
{ 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
msp3400c_set_carrier(client, data->cdo1, data->cdo2);
msp_set_source(client, data->dsp_src);
- msp_write_dsp(client, 0x000e, data->dsp_matrix);
+ /* set prescales */
- if (state->has_nicam) {
- /* nicam prescale */
- msp_write_dsp(client, 0x0010, 0x5a00); /* was: 0x3000 */
- }
+ /* volume prescale for SCART (AM mono input) */
+ msp_write_dsp(client, 0x000d, 0x1900);
+ msp_write_dsp(client, 0x000e, data->dsp_matrix);
+ if (state->has_nicam) /* nicam prescale */
+ msp_write_dsp(client, 0x0010, 0x5a00);
}
/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr);
- msp3400c_set_carrier(client, state->second, state->main);
if (state->nicam_on)
src = 0x0100; /* NICAM */
break;
{
struct msp_state *state = i2c_get_clientdata(client);
- if (msp3400c_detect_stereo(client)) {
- msp3400c_set_audmode(client);
+ if (msp_detect_stereo(client)) {
+ msp_set_audmode(client);
}
if (msp_once)
/* mute */
msp_set_mute(client);
- msp3400c_set_mode(client, MSP_MODE_AM_DETECT /* +1 */ );
+ msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
val1 = val2 = 0;
max1 = max2 = -1;
state->watch_stereo = 0;
state->second = msp3400c_carrier_detect_65[max2].cdo;
msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
msp3400c_set_carrier(client, state->second, state->main);
- /* volume prescale for SCART (AM mono input) */
- msp_write_dsp(client, 0x000d, 0x1900);
state->watch_stereo = 1;
} else if (max2 == 0 && state->has_nicam) {
/* D/K NICAM */
if (msp_sleep(state,200))
goto restart;
- /* start autodetect */
+ /* start autodetect. Note: autodetect is not supported for
+ NTSC-M and radio, hence we force the standard in those cases. */
if (state->radio)
std = 0x40;
else
v4l_dbg(1, msp_debug, client, "autodetection failed,"
" switching to backup standard: %s (0x%04x)\n",
msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val);
- val = 0x0009;
+ state->std = val = 0x0009;
msp_write_dem(client, 0x20, val);
}
- /* set various prescales */
- msp_write_dsp(client, 0x0d, 0x1900); /* scart */
- msp_write_dsp(client, 0x0e, 0x2403); /* FM */
- msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
-
/* set stereo */
switch (val) {
case 0x0008: /* B/G NICAM */
case 0x000a: /* I NICAM */
- if (val == 0x0008)
- state->mode = MSP_MODE_FM_NICAM1;
- else
+ case 0x000b: /* D/K NICAM */
+ if (val == 0x000a)
state->mode = MSP_MODE_FM_NICAM2;
+ else
+ state->mode = MSP_MODE_FM_NICAM1;
/* just turn on stereo */
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
state->nicam_on = 1;
/* scart routing (this doesn't belong here I think) */
msp_set_scart(client,SCART_IN2,0);
break;
+ case 0x0002:
case 0x0003:
case 0x0004:
case 0x0005:
break;
}
- /* unmute, restore misc registers */
- msp_set_audio(client);
- msp_write_dsp(client, 0x13, state->acb);
+ /* set various prescales */
+ msp_write_dsp(client, 0x0d, 0x1900); /* scart */
+ msp_write_dsp(client, 0x0e, 0x3000); /* FM */
+ if (state->has_nicam)
+ msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
+
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
+ /* unmute, restore misc registers */
+ msp_set_audio(client);
+
+ msp_write_dsp(client, 0x13, state->acb);
msp3400c_set_audmode(client);
/* monitor tv audio mode, the first time don't wait
/* ----------------------------------------------------------------------- */
-/* msp34xxG + (autoselect no-thread) */
-/* this one uses both automatic standard detection and automatic sound */
-/* select which are available in the newer G versions */
-/* struct msp: only norm, acb and source are really used in this mode */
+/* msp34xxG + (autoselect no-thread)
+ * this one uses both automatic standard detection and automatic sound
+ * select which are available in the newer G versions
+ * struct msp: only norm, acb and source are really used in this mode
+ */
/* set the same 'source' for the loudspeaker, scart and quasi-peak detector
* the value for source is the same as bit 15:8 of DSP registers 0x08,
* 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
- *
- * this function replaces msp3400c_set_audmode
*/
static void msp34xxg_set_source(struct i2c_client *client, int source)
{
return 0x0001;
}
-/* (re-)initialize the msp34xxg, according to the current norm in state->norm
- * return 0 if it worked, -1 if it failed
- */
-static int msp34xxg_reset(struct i2c_client *client)
+/* (re-)initialize the msp34xxg */
+static void msp34xxg_reset(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
- int modus, std;
+ int modus;
- if (msp_reset(client))
- return -1;
+ /* initialize std to 1 (autodetect) to signal that no standard is
+ selected yet. */
+ state->std = 1;
+
+ msp_reset(client);
/* make sure that input/output is muted (paranoid mode) */
/* ACB, mute DSP input, mute SCART 1 */
- if (msp_write_dsp(client, 0x13, 0x0f20))
- return -1;
+ msp_write_dsp(client, 0x13, 0x0f20);
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
/* step-by-step initialisation, as described in the manual */
modus = msp34xxg_modus(client);
- if (state->radio)
- std = 0x40;
- else
- std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
- modus &= ~0x03; /* STATUS_CHANGE = 0 */
- modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION = 1 */
- if (msp_write_dem(client, 0x30, modus))
- return -1;
- if (msp_write_dem(client, 0x20, std))
- return -1;
+ msp_write_dem(client, 0x30, modus);
/* write the dsps that may have an influence on
standard/audio autodetection right now */
msp34xxg_set_source(client, state->source);
- /* AM/FM Prescale [15:8] 75khz deviation */
- if (msp_write_dsp(client, 0x0e, 0x3000))
- return -1;
-
- /* NICAM Prescale 9db gain (as recommended) */
- if (msp_write_dsp(client, 0x10, 0x5a00))
- return -1;
+ msp_write_dsp(client, 0x0d, 0x1900); /* scart */
+ msp_write_dsp(client, 0x0e, 0x3000); /* FM */
+ if (state->has_nicam)
+ msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
- return 0;
+ /* set identification threshold. Personally, I
+ * I set it to a higher value than the default
+ * of 0x190 to ignore noisy stereo signals.
+ * this needs tuning. (recommended range 0x00a0-0x03c0)
+ * 0x7f0 = forced mono mode
+ *
+ * a2 threshold for stereo/bilingual.
+ * Note: this register is part of the Manual/Compatibility mode.
+ * It is supported by all 'G'-family chips.
+ */
+ msp_write_dem(client, 0x22, msp_stereo_thresh);
}
int msp34xxg_thread(void *data)
{
struct i2c_client *client = data;
struct msp_state *state = i2c_get_clientdata(client);
- int val, std, i;
+ int val, i;
v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
/* setup the chip*/
msp34xxg_reset(client);
- std = msp_standard;
- if (std != 0x01)
+ state->std = state->radio ? 0x40 : msp_standard;
+ if (state->std != 1)
goto unmute;
+ /* start autodetect */
+ msp_write_dem(client, 0x20, state->std);
/* watch autodetect */
- v4l_dbg(1, msp_debug, client, "triggered autodetect, waiting for result\n");
+ v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
for (i = 0; i < 10; i++) {
if (msp_sleep(state, 100))
goto restart;
/* check results */
val = msp_read_dem(client, 0x7e);
if (val < 0x07ff) {
- std = val;
+ state->std = val;
break;
}
v4l_dbg(2, msp_debug, client, "detection still in progress\n");
}
- if (std == 1) {
+ if (state->std == 1) {
v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n");
continue;
}
unmute:
- state->std = std;
- v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
- msp_standard_std_name(std), std);
+ v4l_dbg(1, msp_debug, client, "detected standard: %s (0x%04x)\n",
+ msp_standard_std_name(state->std), state->std);
/* unmute: dispatch sound to scart output, set scart volume */
msp_set_audio(client);
if (msp_write_dsp(client, 0x13, state->acb))
return -1;
- if (state->has_i2s_conf)
- msp_write_dem(client, 0x40, state->i2s_mode);
+ /* the periodic stereo/SAP check is only relevant for
+ the 0x20 standard (BTSC) */
+ if (state->std != 0x20)
+ continue;
+
+ state->watch_stereo = 1;
+
+ /* monitor tv audio mode, the first time don't wait
+ in order to get a quick stereo/SAP update */
+ watch_stereo(client);
+ while (state->watch_stereo) {
+ watch_stereo(client);
+ if (msp_sleep(state, 5000))
+ goto restart;
+ }
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
-static void msp34xxg_detect_stereo(struct i2c_client *client)
+static int msp34xxg_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
-
int status = msp_read_dem(client, 0x0200);
int is_bilingual = status & 0x100;
int is_stereo = status & 0x40;
+ int oldrx = state->rxsubchans;
state->rxsubchans = 0;
if (is_stereo)
else
state->rxsubchans = V4L2_TUNER_SUB_MONO;
if (is_bilingual) {
- state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
- /* I'm supposed to check whether it's SAP or not
- * and set only LANG2/SAP in this case. Yet, the MSP
- * does a lot of work to hide this and handle everything
- * the same way. I don't want to work around it so unless
- * this is a problem, I'll handle SAP just like lang1/lang2.
- */
+ if (state->std == 0x20)
+ state->rxsubchans |= V4L2_TUNER_SUB_SAP;
+ else
+ state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
}
v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
status, is_stereo, is_bilingual, state->rxsubchans);
+ return (oldrx != state->rxsubchans);
}
static void msp34xxg_set_audmode(struct i2c_client *client)
struct msp_state *state = i2c_get_clientdata(client);
int source;
+ if (state->std == 0x20) {
+ if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) &&
+ (state->audmode == V4L2_TUNER_MODE_STEREO ||
+ state->audmode == V4L2_TUNER_MODE_LANG2)) {
+ msp_write_dem(client, 0x20, 0x21);
+ } else {
+ msp_write_dem(client, 0x20, 0x20);
+ }
+ }
+
switch (state->audmode) {
case V4L2_TUNER_MODE_MONO:
source = 0; /* mono only */
switch (state->opmode) {
case OPMODE_MANUAL:
case OPMODE_AUTODETECT:
- state->watch_stereo = 0;
msp3400c_set_audmode(client);
break;
case OPMODE_AUTOSELECT:
}
}
-void msp_detect_stereo(struct i2c_client *client)
+int msp_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
switch (state->opmode) {
case OPMODE_MANUAL:
case OPMODE_AUTODETECT:
- msp3400c_detect_stereo(client);
- break;
+ return msp3400c_detect_stereo(client);
case OPMODE_AUTOSELECT:
- msp34xxg_detect_stereo(client);
- break;
+ return msp34xxg_detect_stereo(client);
}
+ return 0;
}
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff