[POWERPC] Fix CDS IRQ handling and PCI code

* Fix IRQ support in the 85xx CDS boards so it uses the new
  generic stuff
* Fix PCI IRQ mapping to use the device tree
* Disabled i8259 support to allow the CDS to boot.  This will be
  fixed soon, but the current code doesn't even compile, so this
  is a vast improvement

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 454fc53289ab5d4a8ea1d5ca635cf810000f68e6..c3268d9877e47ab968d14d0b9718fab6307bbf41 100644 (file)
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -14,7 +14,6 @@ config MPC8540_ADS
 config MPC85xx_CDS
        bool "Freescale MPC85xx CDS"
        select DEFAULT_UIMAGE
-       select PPC_I8259 if PCI
        help
          This option enables support for the MPC85xx CDS board
 

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 18e6e11f70202f1a0ad303442bdc780cee6d1231..1d357d32a29f5ed757146a47949a9cc0590548ba 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
 static int cds_pci_slot = 2;
 static volatile u8 *cadmus;
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
-       MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* Ext 0: PCI slot 0 */
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* Ext 1: PCI slot 1 */
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* Ext 2: PCI slot 2 */
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* Ext 3: PCI slot 3 */
-#else
-       0x0,                            /* External  0: */
-       0x0,                            /* External  1: */
-       0x0,                            /* External  2: */
-       0x0,                            /* External  3: */
-#endif
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* External 5: PHY */
-       0x0,                            /* External  6: */
-       0x0,                            /* External  7: */
-       0x0,                            /* External  8: */
-       0x0,                            /* External  9: */
-       0x0,                            /* External 10: */
-#ifdef CONFIG_PCI
-       (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),    /* Ext 11: PCI2 slot 0 */
-#else
-       0x0,                            /* External 11: */
-#endif
-};
-
 
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-       struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-       if (!hose->index)
-       {
-               /* Handle PCI1 interrupts */
-               char pci_irq_table[][4] =
-                       /*
-                        *      PCI IDSEL/INTPIN->INTLINE
-                        *        A      B      C      D
-                        */
-
-                       /* Note IRQ assignment for slots is based on which slot the elysium is
-                        * in -- in this setup elysium is in slot #2 (this PIRQA as first
-                        * interrupt on slot */
-               {
-                       { 0, 1, 2, 3 }, /* 16 - PMC */
-                       { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
-                       { 0, 1, 2, 3 }, /* 18 - Slot 1 */
-                       { 1, 2, 3, 0 }, /* 19 - Slot 2 */
-                       { 2, 3, 0, 1 }, /* 20 - Slot 3 */
-                       { 3, 0, 1, 2 }, /* 21 - Slot 4 */
-               };
-
-               const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
-               int i, j;
-
-               for (i = 0; i < 6; i++)
-                       for (j = 0; j < 4; j++)
-                               pci_irq_table[i][j] =
-                                       ((pci_irq_table[i][j] + 5 -
-                                         cds_pci_slot) & 0x3) + PIRQ0A;
-
-               return PCI_IRQ_TABLE_LOOKUP;
-       } else {
-               /* Handle PCI2 interrupts (if we have one) */
-               char pci_irq_table[][4] =
-               {
-                       /*
-                        * We only have one slot and one interrupt
-                        * going to PIRQA - PIRQD */
-                       { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
-               };
-
-               const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
-               return PCI_IRQ_TABLE_LOOKUP;
-       }
-}
 
 #define ARCADIA_HOST_BRIDGE_IDSEL      17
 #define ARCADIA_2ND_BRIDGE_IDSEL       3
@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
                pci_dev_put(dev);
        }
+
+       /* Now map all the PCI irqs */
+       dev = NULL;
+       for_each_pci_dev(dev)
+               pci_read_irq_line(dev);
+}
+
+#ifdef CONFIG_PPC_I8259
+#warning The i8259 PIC support is currently broken
+static void mpc85xx_8259_cascade(unsigned int irq, struct
+               irq_desc *desc, struct pt_regs *regs)
+{
+       unsigned int cascade_irq = i8259_irq(regs);
+
+       if (cascade_irq != NO_IRQ)
+               generic_handle_irq(cascade_irq, regs);
+
+       desc->chip->eoi(irq);
 }
+#endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
 void __init mpc85xx_cds_pic_init(void)
 {
-       struct mpic *mpic1;
-       phys_addr_t OpenPIC_PAddr;
+       struct mpic *mpic;
+       struct resource r;
+       struct device_node *np = NULL;
+       struct device_node *cascade_node = NULL;
+       int cascade_irq;
 
-       /* Determine the Physical Address of the OpenPIC regs */
-       OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+       np = of_find_node_by_type(np, "open-pic");
+
+       if (np == NULL) {
+               printk(KERN_ERR "Could not find open-pic node\n");
+               return;
+       }
 
-       mpic1 = mpic_alloc(OpenPIC_PAddr,
+       if (of_address_to_resource(np, 0, &r)) {
+               printk(KERN_ERR "Failed to map mpic register space\n");
+               of_node_put(np);
+               return;
+       }
+
+       mpic = mpic_alloc(np, r.start,
                        MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-                       4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
-                       mpc85xx_cds_openpic_initsenses,
-                       sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC  ");
-       BUG_ON(mpic1 == NULL);
-       mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
-       mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
-       mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
-       mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
-       mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
-       mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
-       mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
-       mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
-       /* dummy mappings to get to 48 */
-       mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
-       mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
-       mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
-       mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
-       /* External ints */
-       mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
-       mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
-       mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-
-       mpic_init(mpic1);
+                       4, 0, " OpenPIC  ");
+       BUG_ON(mpic == NULL);
+
+       /* Return the mpic node */
+       of_node_put(np);
+
+       mpic_assign_isu(mpic, 0, r.start + 0x10200);
+       mpic_assign_isu(mpic, 1, r.start + 0x10280);
+       mpic_assign_isu(mpic, 2, r.start + 0x10300);
+       mpic_assign_isu(mpic, 3, r.start + 0x10380);
+       mpic_assign_isu(mpic, 4, r.start + 0x10400);
+       mpic_assign_isu(mpic, 5, r.start + 0x10480);
+       mpic_assign_isu(mpic, 6, r.start + 0x10500);
+       mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+       /* Used only for 8548 so far, but no harm in
+        * allocating them for everyone */
+       mpic_assign_isu(mpic, 8, r.start + 0x10600);
+       mpic_assign_isu(mpic, 9, r.start + 0x10680);
+       mpic_assign_isu(mpic, 10, r.start + 0x10700);
+       mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+       /* External Interrupts */
+       mpic_assign_isu(mpic, 12, r.start + 0x10000);
+       mpic_assign_isu(mpic, 13, r.start + 0x10080);
+       mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+       mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+       /* Initialize the i8259 controller */
+       for_each_node_by_type(np, "interrupt-controller")
+               if (device_is_compatible(np, "chrp,iic")) {
+                       cascade_node = np;
+                       break;
+               }
+
+       if (cascade_node == NULL) {
+               printk(KERN_DEBUG "Could not find i8259 PIC\n");
+               return;
+       }
 
-#ifdef CONFIG_PCI
-       mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+       cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+       if (cascade_irq == NO_IRQ) {
+               printk(KERN_ERR "Failed to map cascade interrupt\n");
+               return;
+       }
 
-       i8259_init(0,0);
-#endif
+       i8259_init(cascade_node, 0);
+       of_node_put(cascade_node);
+
+       set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
+#endif /* CONFIG_PPC_I8259 */
 }
 
 
@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
                add_bridge(np);
 
        ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
-       ppc_md.pci_swizzle = common_swizzle;
-       ppc_md.pci_map_irq = mpc85xx_map_irq;
        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif