.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
+ .name = "Hauppauge WinTV-QuadHD-ATSC",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x6b28,
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6a18,
+ .card = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 1 */
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6b18,
+ .card = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
+ case 165100:
+ /*
+ * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+ * ATSC, ATSC
+ */
+ break;
+ case 165101:
+ /*
+ * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
+ * ATSC, ATSC
+ */
+ break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n",
break;
case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
/*
* HVR5525 GPIO Details:
* GPIO-00 IR_WIDE
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
#include "sp2.h"
#include "m88ds3103.h"
#include "m88rs6000t.h"
+#include "lgdt3306a.h"
static unsigned int debug;
.refclock = 27000000,
};
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {
+ .i2c_addr = 0x59,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+ .deny_i2c_rptr = 1, /* Disabled */
+ .spectral_inversion = 0, /* Disabled */
+ .mpeg_mode = LGDT3306A_MPEG_SERIAL,
+ .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
+ .xtalMHz = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {
+ .i2c_addr = 0x0e,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+ .deny_i2c_rptr = 1, /* Disabled */
+ .spectral_inversion = 0, /* Disabled */
+ .mpeg_mode = LGDT3306A_MPEG_SERIAL,
+ .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
+ .xtalMHz = 25, /* 24 or 25 */
+};
+
static int p8000_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage voltage)
{
break;
}
break;
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ switch (port->nr) {
+ /* port b - Terrestrial/cable */
+ case 1:
+ /* attach frontend */
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+ &hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = fe0->dvb.frontend;
+ si2157_config.if_port = 1;
+ si2157_config.inversion = 1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+ if (!client_tuner || !client_tuner->dev.driver) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+
+ /* port c - terrestrial/cable */
+ case 2:
+ /* attach frontend */
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+ &hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = fe0->dvb.frontend;
+ si2157_config.if_port = 1;
+ si2157_config.inversion = 1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x62;
+ info.platform_data = &si2157_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+ if (!client_tuner || !client_tuner->dev.driver) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "