clocksource/drivers/fttmr010: Drop Gemini specifics

The Gemini now has a proper clock driver and a proper PCLK
assigned in its device tree. Drop the Gemini-specific hacks
to look up the system speed and rely on the clock framework
like everyone else.

Cc: Joel Stanley <joel@jms.id.au>
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index 58ce017e4a65474bb7aafb538f5c672e2ca42d6d..db097db346e3f48ecc467fff694d44dfafa3b4cf 100644 (file)
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -11,8 +11,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/sched_clock.h>
@@ -179,9 +177,28 @@ static struct irqaction fttmr010_timer_irq = {
        .handler        = fttmr010_timer_interrupt,
 };
 
-static int __init fttmr010_timer_common_init(struct device_node *np)
+static int __init fttmr010_timer_init(struct device_node *np)
 {
        int irq;
+       struct clk *clk;
+       int ret;
+
+       /*
+        * These implementations require a clock reference.
+        * FIXME: we currently only support clocking using PCLK
+        * and using EXTCLK is not supported in the driver.
+        */
+       clk = of_clk_get_by_name(np, "PCLK");
+       if (IS_ERR(clk)) {
+               pr_err("could not get PCLK\n");
+               return PTR_ERR(clk);
+       }
+       ret = clk_prepare_enable(clk);
+       if (ret) {
+               pr_err("failed to enable PCLK\n");
+               return ret;
+       }
+       tick_rate = clk_get_rate(clk);
 
        base = of_iomap(np, 0);
        if (!base) {
@@ -229,81 +246,5 @@ static int __init fttmr010_timer_common_init(struct device_node *np)
 
        return 0;
 }
-
-static int __init fttmr010_timer_of_init(struct device_node *np)
-{
-       /*
-        * These implementations require a clock reference.
-        * FIXME: we currently only support clocking using PCLK
-        * and using EXTCLK is not supported in the driver.
-        */
-       struct clk *clk;
-       int ret;
-
-       clk = of_clk_get_by_name(np, "PCLK");
-       if (IS_ERR(clk)) {
-               pr_err("could not get PCLK\n");
-               return PTR_ERR(clk);
-       }
-       ret = clk_prepare_enable(clk);
-       if (ret) {
-               pr_err("failed to enable PCLK\n");
-               return ret;
-       }
-       tick_rate = clk_get_rate(clk);
-
-       return fttmr010_timer_common_init(np);
-}
-CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_of_init);
-
-/*
- * Gemini-specific: relevant registers in the global syscon
- */
-#define GLOBAL_STATUS          0x04
-#define CPU_AHB_RATIO_MASK     (0x3 << 18)
-#define CPU_AHB_1_1            (0x0 << 18)
-#define CPU_AHB_3_2            (0x1 << 18)
-#define CPU_AHB_24_13          (0x2 << 18)
-#define CPU_AHB_2_1            (0x3 << 18)
-#define REG_TO_AHB_SPEED(reg)  ((((reg) >> 15) & 0x7) * 10 + 130)
-
-static int __init gemini_timer_of_init(struct device_node *np)
-{
-       static struct regmap *map;
-       int ret;
-       u32 val;
-
-       map = syscon_regmap_lookup_by_phandle(np, "syscon");
-       if (IS_ERR(map)) {
-               pr_err("Can't get regmap for syscon handle\n");
-               return -ENODEV;
-       }
-       ret = regmap_read(map, GLOBAL_STATUS, &val);
-       if (ret) {
-               pr_err("Can't read syscon status register\n");
-               return -ENXIO;
-       }
-
-       tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
-       pr_info("Bus: %dMHz ", tick_rate / 1000000);
-
-       tick_rate /= 6;         /* APB bus run AHB*(1/6) */
-
-       switch (val & CPU_AHB_RATIO_MASK) {
-       case CPU_AHB_1_1:
-               pr_cont("(1/1)\n");
-               break;
-       case CPU_AHB_3_2:
-               pr_cont("(3/2)\n");
-               break;
-       case CPU_AHB_24_13:
-               pr_cont("(24/13)\n");
-               break;
-       case CPU_AHB_2_1:
-               pr_cont("(2/1)\n");
-               break;
-       }
-
-       return fttmr010_timer_common_init(np);
-}
-CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init);
+CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
+CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);