#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy((dst), (src), (len))
-/*
- * Invalidate a VA range; pads to L2 cacheline boundaries.
- *
- * Note that on TILE64, __inv_buffer() actually flushes modified
- * cache lines in addition to invalidating them, i.e., it's the
- * same as __finv_buffer().
- */
-static inline void __inv_buffer(void *buffer, size_t size)
-{
- char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
- char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
- while (next < finish) {
- __insn_inv(next);
- next += CHIP_INV_STRIDE();
- }
-}
-
/* Flush a VA range; pads to L2 cacheline boundaries. */
static inline void __flush_buffer(void *buffer, size_t size)
{
}
-/* Invalidate a VA range and wait for it to be complete. */
-static inline void inv_buffer(void *buffer, size_t size)
-{
- __inv_buffer(buffer, size);
- mb();
-}
-
/*
* Flush a locally-homecached VA range and wait for the evicted
* cachelines to hit memory.
mb_incoherent();
}
+#ifdef __tilepro__
+/* Invalidate a VA range; pads to L2 cacheline boundaries. */
+static inline void __inv_buffer(void *buffer, size_t size)
+{
+ char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+ char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+ while (next < finish) {
+ __insn_inv(next);
+ next += CHIP_INV_STRIDE();
+ }
+}
+
+/* Invalidate a VA range and wait for it to be complete. */
+static inline void inv_buffer(void *buffer, size_t size)
+{
+ __inv_buffer(buffer, size);
+ mb();
+}
+#endif
+
/*
* Flush and invalidate a VA range that is homed remotely, waiting
* until the memory controller holds the flushed values. If "hfh" is
return len;
}
-/**
- * inv_user: - Invalidate a block of memory in user space from cache.
- * @mem: Destination address, in user space.
- * @len: Number of bytes to invalidate.
- *
- * Returns number of bytes that could not be invalidated.
- * On success, this will be zero.
- *
- * Note that on Tile64, the "inv" operation is in fact a
- * "flush and invalidate", so cache write-backs will occur prior
- * to the cache being marked invalid.
- */
-extern unsigned long inv_user_asm(void __user *mem, unsigned long len);
-static inline unsigned long __must_check __inv_user(
- void __user *mem, unsigned long len)
-{
- int retval;
-
- might_fault();
- retval = inv_user_asm(mem, len);
- mb_incoherent();
- return retval;
-}
-static inline unsigned long __must_check inv_user(
- void __user *mem, unsigned long len)
-{
- if (access_ok(VERIFY_WRITE, mem, len))
- return __inv_user(mem, len);
- return len;
-}
-
/**
* finv_user: - Flush-inval a block of memory in user space from cache.
* @mem: Destination address, in user space.
* to honor the arguments at some point.)
*
* Flush and invalidation of memory can normally be performed with the
- * __insn_flush(), __insn_inv(), and __insn_finv() instructions from
- * userspace. The DCACHE option to the system call allows userspace
+ * __insn_flush() and __insn_finv() instructions from userspace.
+ * The DCACHE option to the system call allows userspace
* to flush the entire L1+L2 data cache from the core. In this case,
* the address and length arguments are not used. The DCACHE flush is
* restricted to the current core, not all cores in the address space.
auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET)
}
{
- inv r6
+ finv r6
move r1, zero /* high 32 bits of CPA is zero */
}
{
{
/* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */
bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL
- inv r4
+ finv r4
}
bnez r7, .Lno_write
{
force_load(p);
/*
- * Repeat, but with inv's instead of loads, to get rid of the
+ * Repeat, but with finv's instead of loads, to get rid of the
* data we just loaded into our own cache and the old home L3.
- * No need to unroll since inv's don't target a register.
+ * No need to unroll since finv's don't target a register.
+ * The finv's are guaranteed not to actually flush the data in
+ * the buffer back to their home, since we just read it, so the
+ * lines are clean in cache; we will only invalidate those lines.
*/
p = (char *)buffer + size - 1;
- __insn_inv(p);
+ __insn_finv(p);
p -= step_size;
p = (char *)((unsigned long)p | (step_size - 1));
for (; p >= base; p -= step_size)
- __insn_inv(p);
+ __insn_finv(p);
- /* Wait for the load+inv's (and thus finvs) to have completed. */
+ /* Wait for these finv's (and thus the first finvs) to be done. */
__insn_mf();
#ifdef __tilegx__
EXPORT_SYMBOL(strncpy_from_user_asm);
EXPORT_SYMBOL(clear_user_asm);
EXPORT_SYMBOL(flush_user_asm);
-EXPORT_SYMBOL(inv_user_asm);
EXPORT_SYMBOL(finv_user_asm);
/* arch/tile/kernel/entry.S */
.word 1b, 2b
.popsection
-/*
- * inv_user_asm takes the user target address in r0 and the
- * number of bytes to invalidate in r1.
- * It returns the number of not inv'able bytes (hopefully zero) in r0.
- */
-STD_ENTRY(inv_user_asm)
- bz r1, 2f
- { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
- { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
- { and r0, r0, r2; and r1, r1, r2 }
- { sub r1, r1, r0 }
-1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
- { addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b }
-2: { move r0, r1; jrp lr }
- STD_ENDPROC(inv_user_asm)
- .pushsection __ex_table,"a"
- .word 1b, 2b
- .popsection
-
/*
* finv_user_asm takes the user target address in r0 and the
* number of bytes to flush-invalidate in r1.
.quad 1b, 2b
.popsection
-/*
- * inv_user_asm takes the user target address in r0 and the
- * number of bytes to invalidate in r1.
- * It returns the number of not inv'able bytes (hopefully zero) in r0.
- */
-STD_ENTRY(inv_user_asm)
- beqz r1, 2f
- { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
- { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
- { and r0, r0, r2; and r1, r1, r2 }
- { sub r1, r1, r0 }
-1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
- { addi r0, r0, CHIP_INV_STRIDE(); bnezt r1, 1b }
-2: { move r0, r1; jrp lr }
- STD_ENDPROC(inv_user_asm)
- .pushsection __ex_table,"a"
- .quad 1b, 2b
- .popsection
-
/*
* finv_user_asm takes the user target address in r0 and the
* number of bytes to flush-invalidate in r1.
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff