#
# Licensed under GPLv2
-config CPU_S3C2440
- bool
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select S3C2440_DMA if S3C2410_DMA
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
- bool
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
- bool
- depends on CPU_S3C2440 || CPU_S3C2442
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
default y if CPU_FREQ_S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
- bool
- depends on CPU_S3C2440
- help
- Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
-
-config MACH_OSIRIS_DVS
- tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
- depends on MACH_OSIRIS
- select TPS65010
- help
- Say Y/M here if you want to have dynamic voltage scaling support
- on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
- The DVS driver alters the voltage supplied to the ARM core
- depending on the frequency it is running at. The driver itself
- does not do any of the frequency alteration, which is left up
- to the cpufreq driver.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select PM_H1940 if PM
- select S3C_DEV_NAND
- help
- Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
- bool "SMDK2440"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select MACH_SMDK
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select CPU_S3C2440
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- default y if ARCH_S3C2440
- select S3C2440_XTAL_16934400
- select CPU_S3C2440
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- select CPU_S3C2442
-
-config MACH_AT2440EVB
- bool "Avantech AT2440EVB development board"
- select CPU_S3C2440
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
- bool "MINI2440 development board"
- select CPU_S3C2440
- select EEPROM_AT24
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_TRIGGER
- select LEDS_TRIGGER_BACKLIGHT
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
- available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
- bool "HP iPAQ rx1950"
- select CPU_S3C2442
- select S3C24XX_DCLK
- select PM_H1940 if PM
- select I2C
- select S3C2410_PWM
- select S3C_DEV_NAND
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C2440_XTAL_16934400
- help
- Say Y here if you're using HP iPAQ rx1950
-
-endmenu
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2440) += dsc.o
-obj-$(CONFIG_CPU_S3C2440) += irq.o
-obj-$(CONFIG_CPU_S3C2440) += clock.o
-obj-$(CONFIG_S3C2440_DMA) += dma.o
-
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div = (parent_rate / rate) / 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2440_camif_upll_round(clk, rate);
-
- camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
- if (rate != parent_rate) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
- .name = "camif",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
- .name = "camif-upll",
- .ops = &(struct clk_ops) {
- .set_rate = s3c2440_camif_upll_setrate,
- .round_rate = s3c2440_camif_upll_round,
- },
-};
-
-static struct clk s3c2440_clk_ac97 = {
- .name = "ac97",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
-{
- unsigned long ucon0, ucon1, ucon2, divisor;
-
- /* the fun of calculating the uart divisors on the s3c2440 */
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0)
- divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
- else if (ucon1 != 0)
- divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
- else if (ucon2 != 0)
- divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
- else
- /* manual calims 44, seems to be 9 */
- divisor = 9;
-
- return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
- .name = "fclk_n",
- .parent = &clk_f,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2440_fclk_n_getrate,
- },
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-};
-
-static int s3c2440_clk_add(struct device *dev)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2440_clk_cam.parent = clock_h;
- s3c2440_clk_ac97.parent = clock_p;
- s3c2440_clk_cam_upll.parent = clock_upll;
- s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
- s3c24xx_register_clock(&s3c2440_clk_ac97);
- s3c24xx_register_clock(&s3c2440_clk_cam);
- s3c24xx_register_clock(&s3c2440_clk_cam_upll);
- clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
- clk_disable(&s3c2440_clk_ac97);
- clk_disable(&s3c2440_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
+++ /dev/null
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S3C2440 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
-#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-
-void s3c2440_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
- [DMACH_XD0] = {
- .name = "xdreq0",
- .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
- },
- [DMACH_XD1] = {
- .name = "xdreq1",
- .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
- },
- [DMACH_SDI] = {
- .name = "sdi",
- .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
- .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- },
- [DMACH_SPI0] = {
- .name = "spi0",
- .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- },
- [DMACH_SPI1] = {
- .name = "spi1",
- .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- },
- [DMACH_UART0] = {
- .name = "uart0",
- .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- },
- [DMACH_UART1] = {
- .name = "uart1",
- .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- },
- [DMACH_UART2] = {
- .name = "uart2",
- .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- },
- [DMACH_TIMER] = {
- .name = "timer",
- .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
- },
- [DMACH_I2S_IN] = {
- .name = "i2s-sdi",
- .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- },
- [DMACH_I2S_OUT] = {
- .name = "i2s-sdo",
- .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- },
- [DMACH_PCM_IN] = {
- .name = "pcm-in",
- .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
- .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- },
- [DMACH_PCM_OUT] = {
- .name = "pcm-out",
- .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
- .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- },
- [DMACH_MIC_IN] = {
- .name = "mic-in",
- .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
- .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- },
- [DMACH_USB_EP1] = {
- .name = "usb-ep1",
- .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
- },
- [DMACH_USB_EP2] = {
- .name = "usb-ep2",
- .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
- },
- [DMACH_USB_EP3] = {
- .name = "usb-ep3",
- .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
- },
- [DMACH_USB_EP4] = {
- .name = "usb-ep4",
- .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
- },
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
- struct s3c24xx_dma_map *map)
-{
- chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
- .select = s3c2440_dma_select,
- .dcon_mask = 7 << 24,
- .map = s3c2440_dma_mappings,
- .map_size = ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
- .channels = {
- [DMACH_SDI] = {
- .list = {
- [0] = 3 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- [2] = 1 | DMA_CH_VALID,
- [3] = 0 | DMA_CH_VALID,
- },
- },
- [DMACH_I2S_IN] = {
- .list = {
- [0] = 1 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- },
- },
- [DMACH_I2S_OUT] = {
- .list = {
- [0] = 2 | DMA_CH_VALID,
- [1] = 1 | DMA_CH_VALID,
- },
- },
- [DMACH_PCM_IN] = {
- .list = {
- [0] = 2 | DMA_CH_VALID,
- [1] = 1 | DMA_CH_VALID,
- },
- },
- [DMACH_PCM_OUT] = {
- .list = {
- [0] = 1 | DMA_CH_VALID,
- [1] = 3 | DMA_CH_VALID,
- },
- },
- [DMACH_MIC_IN] = {
- .list = {
- [0] = 3 | DMA_CH_VALID,
- [1] = 2 | DMA_CH_VALID,
- },
- },
- },
-};
-
-static int __init s3c2440_dma_add(struct device *dev)
-{
- s3c2410_dma_init();
- s3c24xx_dma_order_set(&s3c2440_dma_order);
- return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct subsys_interface s3c2440_dma_interface = {
- .name = "s3c2440_dma",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
- return subsys_interface_register(&s3c2440_dma_interface);
-}
-
-arch_initcall(s3c2440_dma_init);
-
+++ /dev/null
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV 0x00000310
-#define GTA02v2_SYSTEM_REV 0x00000320
-#define GTA02v3_SYSTEM_REV 0x00000330
-#define GTA02v4_SYSTEM_REV 0x00000340
-#define GTA02v5_SYSTEM_REV 0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV 0x00000360
-
-#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
-#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
-#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
-
-#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
-#define GTA02_GPIO_IO1 S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-
-#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
-#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
-#define GTA02_IRQ_MODEM IRQ_EINT1
-#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
-#define GTA02_IRQ_AUX IRQ_EINT6
-#define GTA02_IRQ_nHOLD IRQ_EINT7
-#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#define GTA02_IRQ_3D IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
-
-#endif /* _GTA02_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-anubis.c
- *
- * Copyright 2003-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
-
-#include "common.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
- /* ISA IO areas */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- },
-
- /* we could possibly compress the next set down into a set of smaller tables
- * pagetables, but that would mean using an L2 section, and it still means
- * we cannot actually feed the same register to an LDR due to 16K spacing
- */
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)ANUBIS_VA_CTRL1,
- .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)ANUBIS_VA_IDREG,
- .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(ANUBIS_VA_CTRL1);
- tmp &= ~ANUBIS_CTRL1_NANDSEL;
- tmp |= slot;
-
- pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
- __raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(anubis_nand_sets),
- .sets = anubis_nand_sets,
- .select_chip = anubis_nand_select,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
- .ioport_shift = 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
- {
- .start = S3C2410_CS3,
- .end = S3C2410_CS3 + (8*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = S3C2410_CS3 + (1<<26) + (6*32),
- .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_IDE0,
- .end = IRQ_IDE0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device anubis_device_ide0 = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_ide0_resource),
- .resource = anubis_ide0_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-static struct resource anubis_ide1_resource[] = {
- {
- .start = S3C2410_CS4,
- .end = S3C2410_CS4 + (8*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = S3C2410_CS4 + (1<<26) + (6*32),
- .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_IDE0,
- .end = IRQ_IDE0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device anubis_device_ide1 = {
- .name = "pata_platform",
- .id = 1,
- .num_resources = ARRAY_SIZE(anubis_ide1_resource),
- .resource = anubis_ide1_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2,
- .dcr_val = 0x48,
- .rcr_val = 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
- [0] = {
- .start = S3C2410_CS5,
- .end = S3C2410_CS5 + (0x20 * 0x20) -1,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = IRQ_ASIX,
- .end = IRQ_ASIX,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device anubis_device_asix = {
- .name = "ax88796",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_asix_resource),
- .resource = anubis_asix_resource,
- .dev = {
- .platform_data = &anubis_asix_platdata,
- }
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
- [0] = {
- .start = S3C2410_CS2,
- .end = S3C2410_CS2 + SZ_8M,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C2410_CS2 + SZ_64M - SZ_2M,
- .end = S3C2410_CS2 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_EINT0,
- .end = IRQ_EINT0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
- .gpio_high = {
- .set = 0x3F000000, /* 24bit panel */
- .mask = 0x0,
- },
- .misc_timing = {
- .set = 0x010100, /* SDRAM timing */
- .mask = 0x1F1F00,
- },
- .misc_control = {
- .set = SM501_MISC_PNL_24BIT,
- .mask = 0,
- },
-
- .devices = SM501_USE_GPIO,
-
- /* set the SDRAM and bus clocks */
- .mclk = 72 * MHZ,
- .m1xclk = 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
- [0] = {
- .bus_num = 1,
- .pin_scl = 44,
- .pin_sda = 45,
- },
- [1] = {
- .bus_num = 2,
- .pin_scl = 40,
- .pin_sda = 41,
- },
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
- .init = &anubis_sm501_initdata,
- .gpio_base = -1,
- .gpio_i2c = anubis_sm501_gpio_i2c,
- .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
- .name = "sm501",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_sm501_resource),
- .resource = anubis_sm501_resource,
- .dev = {
- .platform_data = &anubis_sm501_platdata,
- },
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &anubis_device_ide0,
- &anubis_device_ide1,
- &anubis_device_asix,
- &anubis_device_sm501,
-};
-
-static struct clk *anubis_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- }
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
- .have_mic = 1,
- .have_lout = 1,
- .output_cdclk = 1,
- .use_mpllin = 1,
- .amp_gpio = S3C2410_GPB(2),
- .amp_gain[0] = S3C2410_GPD(10),
- .amp_gain[1] = S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
- s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
- printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
- __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
- anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
- anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
- } else {
- /* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
- }
-}
-
-static void __init anubis_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&anubis_nand_info);
- simtec_audio_add(NULL, false, &anubis_audio);
-
- platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
- i2c_register_board_info(0, anubis_i2c_devs,
- ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = anubis_map_io,
- .init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- * and modifications by SBZ <sbz@spgui.org> and
- * Weibing <http://weibing.blogbus.com>
- *
- * For product information, visit http://www.arm.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/mci.h>
-
-#include "common.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
- /* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "Kernel",
- .size = SZ_2M,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "Root",
- .offset = SZ_256K + SZ_2M,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
- .partitions = at2440evb_default_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
- .sets = at2440evb_nand_sets,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
- [0] = {
- .start = S3C2410_CS3,
- .end = S3C2410_CS3 + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = S3C2410_CS3 + 4,
- .end = S3C2410_CS3 + 7,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .start = IRQ_EINT7,
- .end = IRQ_EINT7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
- .resource = at2440evb_dm9k_resource,
- .dev = {
- .platform_data = &at2440evb_dm9k_pdata,
- },
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- .gpio_detect = S3C2410_GPG(10),
-};
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 800,
- .height = 480,
-
- .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
- .xres = 800,
- .yres = 480,
- .bpp = 16,
- .left_margin = 88,
- .right_margin = 40,
- .hsync_len = 128,
- .upper_margin = 32,
- .lower_margin = 11,
- .vsync_len = 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
- .displays = &at2440evb_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_lcd,
- &at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
- s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_clocks(16934400);
- s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-}
-
-static void __init at2440evb_init(void)
-{
- s3c24xx_fb_set_platdata(&at2440evb_fb_info);
- s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
- s3c_nand_set_platdata(&at2440evb_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
- .atag_offset = 0x100,
- .map_io = at2440evb_map_io,
- .init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
- *
- * Copyright (C) 2006-2009 by Openmoko, Inc.
- * Authors: Harald Welte <laforge@openmoko.org>
- * Andy Green <andy@openmoko.org>
- * Werner Almesberger <werner@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-
-#include <plat/usb-control.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
-
-#include "common.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
- long delay = 0;
- char led;
-
- led = (state) ? 1 : 0;
- gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
- return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
- {
- .virtual = 0xe0000000,
- .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
- int ma;
-
- /* Interpret charger type */
- if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
- /*
- * Sanity - stop GPO driving out now that we have a 1A charger
- * GPO controls USB Host power generation on GTA02
- */
- pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
- ma = 1000;
- } else
- ma = 100;
-
- pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
- if (gta02_usb_vbus_draw) {
- pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
- return;
- }
-
-#ifdef CONFIG_PCF50633_ADC
- pcf50633_adc_async_read(gta02_pcf,
- PCF50633_ADCC1_MUX_ADCIN1,
- PCF50633_ADCC1_AVERAGE_16,
- gta02_configure_pmu_for_charger,
- NULL);
-#else
- /*
- * If the PCF50633 ADC is disabled we fallback to a
- * 100mA limit for safety.
- */
- pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
- if (irq == PCF50633_IRQ_USBINS) {
- schedule_delayed_work(>a02_charger_work,
- GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
- return;
- }
-
- if (irq == PCF50633_IRQ_USBREM) {
- cancel_delayed_work_sync(>a02_charger_work);
- gta02_usb_vbus_draw = 0;
- }
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
- if (!gta02_pcf)
- return;
-
- gta02_usb_vbus_draw = ma;
-
- schedule_delayed_work(>a02_charger_work,
- GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback NULL
-#define gta02_udc_vbus_draw NULL
-#endif
-
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
-static char *gta02_batteries[] = {
- "battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
- .default_brightness = 0x3f,
- .default_brightness_limit = 0,
- .ramp_time = 5,
-};
-
-struct pcf50633_platform_data gta02_pcf_pdata = {
- .resumers = {
- [0] = PCF50633_INT1_USBINS |
- PCF50633_INT1_USBREM |
- PCF50633_INT1_ALARM,
- [1] = PCF50633_INT2_ONKEYF,
- [2] = PCF50633_INT3_ONKEY1S,
- [3] = PCF50633_INT4_LOWSYS |
- PCF50633_INT4_LOWBAT |
- PCF50633_INT4_HIGHTMP,
- },
-
- .batteries = gta02_batteries,
- .num_batteries = ARRAY_SIZE(gta02_batteries),
-
- .charger_reference_current_ma = 1000,
-
- .backlight_data = >a02_backlight_data,
-
- .reg_init_data = {
- [PCF50633_REGULATOR_AUTO] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_DOWN1] = {
- .constraints = {
- .min_uV = 1300000,
- .max_uV = 1600000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_DOWN2] = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- },
- },
- [PCF50633_REGULATOR_HCLDO] = {
- .constraints = {
- .min_uV = 2000000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- },
- [PCF50633_REGULATOR_LDO1] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO2] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO3] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO4] = {
- .constraints = {
- .min_uV = 3200000,
- .max_uV = 3200000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO5] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO6] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- },
- },
- [PCF50633_REGULATOR_MEMLDO] = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- },
- },
-
- },
- .probe_done = gta02_pmu_attach_child_devices,
- .mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
- .width = 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
- .start = GTA02_FLASH_BASE,
- .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = >a02_nor_flash_data,
- },
- .resource = >a02_nor_flash_resource,
- .num_resources = 1,
-};
-
-
-struct platform_device s3c24xx_pwm_device = {
- .name = "s3c24xx_pwm",
- .num_resources = 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
- .name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pcf50633", 0x73),
- .irq = GTA02_IRQ_PCF50633,
- .platform_data = >a02_pcf_pdata,
- },
- {
- I2C_BOARD_INFO("wm8753", 0x1a),
- },
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
- [0] = {
- /*
- * This name is also hard-coded in the boot loaders, so
- * changing it would would require all users to upgrade
- * their boot loaders, some of which are stored in a NOR
- * that is considered to be immutable.
- */
- .name = "neo1973-nand",
- .nr_chips = 1,
- .flash_bbt = 1,
- },
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
- .tacls = 0,
- .twrph0 = 25,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(gta02_nand_sets),
- .sets = gta02_nand_sets,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
- .vbus_draw = gta02_udc_vbus_draw,
- .pullup_pin = GTA02_GPIO_USB_PULLUP,
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
- .port[0] = {
- .flags = S3C_HCDFLG_USED,
- },
- .port[1] = {
- .flags = 0,
- },
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
- .delay = 10000,
- .presc = 0xff, /* slow as we can go */
- .oversampling_shift = 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
- {
- .gpio = GTA02_GPIO_AUX_KEY,
- .code = KEY_PHONE,
- .desc = "Aux",
- .type = EV_KEY,
- .debounce_interval = 100,
- },
- {
- .gpio = GTA02_GPIO_HOLD_KEY,
- .code = KEY_PAUSE,
- .desc = "Hold",
- .type = EV_KEY,
- .debounce_interval = 100,
- },
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
- .buttons = gta02_buttons,
- .nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = >a02_buttons_pdata,
- },
-};
-
-static void __init gta02_map_io(void)
-{
- s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_sdi,
- &s3c_device_usbgadget,
- &s3c_device_nand,
- >a02_nor_flash,
- &s3c24xx_pwm_device,
- &s3c_device_iis,
- &samsung_asoc_dma,
- &s3c_device_i2c0,
- >a02_dfbmcs320_device,
- >a02_buttons_device,
- &s3c_device_adc,
- &s3c_device_ts,
-};
-
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device. Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent. This makes them get suspended and
- * resumed with their parent the pcf50633 still around. All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
- int n;
-
- /* Grab a copy of the now probed PMU pointer. */
- gta02_pcf = pcf;
-
- for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
- gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
- platform_add_devices(gta02_devices_pmu_children,
- ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
-static void gta02_poweroff(void)
-{
- pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
- /* Set the panic callback to turn AUX LED on or off. */
- panic_blink = gta02_panic_blink;
-
- s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
- INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
-#endif
-
- s3c24xx_udc_set_platdata(>a02_udc_cfg);
- s3c24xx_ts_set_platdata(>a02_ts_info);
- s3c_ohci_set_platdata(>a02_usb_info);
- s3c_nand_set_platdata(>a02_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
- platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
- pm_power_off = gta02_poweroff;
-
- regulator_has_full_constraints();
-}
-
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
- /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .atag_offset = 0x100,
- .map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
- .init_machine = gta02_machine_init,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- * and modifications by SBZ <sbz@spgui.org> and
- * Weibing <http://weibing.blogbus.com> and
- * Michel Pollet <buserror@gmail.com>
- *
- * For product information, visit http://code.google.com/p/mini2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/i2c/at24.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "common.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
- /* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPC(5),
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
- .width = _xres, \
- .xres = _xres, \
- .height = _yres, \
- .yres = _yres, \
- .left_margin = margin_left, \
- .right_margin = margin_right, \
- .upper_margin = margin_top, \
- .lower_margin = margin_bottom, \
- .hsync_len = hsync, \
- .vsync_len = vsync, \
- .pixclock = ((_clock*100000000000LL) / \
- ((refresh) * \
- (hsync + margin_left + _xres + margin_right) * \
- (vsync + margin_top + _yres + margin_bottom))), \
- .bpp = 16,\
- .type = (S3C2410_LCDCON1_TFT16BPP |\
- S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
- [0] = { /* mini2440 + 3.5" TFT + touchscreen */
- _LCD_DECLARE(
- 7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
- 320, 4, 4, 2, /* y timing */
- 60), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_PWREN),
- },
- [1] = { /* mini2440 + 7" TFT + touchscreen */
- _LCD_DECLARE(
- 10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
- 480, 29, 3, 3, /* y timing */
- 50), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN),
- },
- /* The VGA shield can outout at several resolutions. All share
- * the same timings, however, anything smaller than 1024x768
- * will only be displayed in the top left corner of a 1024x768
- * XGA output unless you add optional dip switches to the shield.
- * Therefore timings for other resolutions have been omitted here.
- */
- [2] = {
- _LCD_DECLARE(
- 10,
- 1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
- 24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP),
- },
- /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
- [3] = {
- _LCD_DECLARE(
- /* clock */
- 7,
- /* xres, margin_right, margin_left, hsync */
- 320, 68, 66, 4,
- /* yres, margin_top, margin_bottom, vsync */
- 240, 4, 4, 9,
- /* refresh rate */
- 60),
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVCLK |
- S3C2410_LCDCON5_HWSWP),
- },
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
- .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
- .num_displays = 1,
- .default_display = 0,
-
- /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
- * and disable the pull down resistors on pins we are using for LCD
- * data. */
-
- .gpcup = (0xf << 1) | (0x3f << 10),
-
- .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
- S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
- S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
- S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
- S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
-
- .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
- S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
- S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
- S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
- S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
- .gpdup = (0x3f << 2) | (0x3f << 10),
-
- .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
- S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
- S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
- S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
- S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
- S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
- .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
- S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
- S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
- S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
- S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
- S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-};
-
-/* MMC/SD */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
- [0] = {
- .name = "u-boot",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "u-boot-env",
- .size = SZ_128K,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "kernel",
- /* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
- .size = 0x00500000,
- .offset = SZ_256K + SZ_128K,
- },
- [3] = {
- .name = "root",
- .offset = SZ_256K + SZ_128K + 0x00500000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
- .partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
- },
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
- .tacls = 0,
- .twrph0 = 25,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
- .sets = mini2440_nand_sets,
- .ignore_unset_ecc = 1,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
- [0] = {
- .start = MACH_MINI2440_DM9K_BASE,
- .end = MACH_MINI2440_DM9K_BASE + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = MACH_MINI2440_DM9K_BASE + 4,
- .end = MACH_MINI2440_DM9K_BASE + 7,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .start = IRQ_EINT7,
- .end = IRQ_EINT7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
- .resource = mini2440_dm9k_resource,
- .dev = {
- .platform_data = &mini2440_dm9k_pdata,
- },
-};
-
-/* CON5
- * +--+ /-----\
- * | | | |
- * | | | BAT |
- * | | \_____/
- * | |
- * | | +----+ +----+
- * | | | K5 | | K1 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K4 | | K2 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K6 | | K3 |
- * | | +----+ +----+
- * .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
- {
- .gpio = S3C2410_GPG(0), /* K1 */
- .code = KEY_F1,
- .desc = "Button 1",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(3), /* K2 */
- .code = KEY_F2,
- .desc = "Button 2",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(5), /* K3 */
- .code = KEY_F3,
- .desc = "Button 3",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(6), /* K4 */
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(7), /* K5 */
- .code = KEY_F5,
- .desc = "Button 5",
- .active_low = 1,
- },
-#if 0
- /* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
- {
- .gpio = S3C2410_GPG(11), /* K6 */
- .code = KEY_F6,
- .desc = "Button 6",
- .active_low = 1,
- },
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
- .buttons = mini2440_buttons,
- .nbuttons = ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mini2440_button_data,
- }
-};
-
-/* LEDS */
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
- .name = "led1",
- .gpio = S3C2410_GPB(5),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
- .name = "led2",
- .gpio = S3C2410_GPB(6),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
- .name = "led3",
- .gpio = S3C2410_GPB(7),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
- .name = "led4",
- .gpio = S3C2410_GPB(8),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .def_trigger = "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
- .name = "backlight",
- .gpio = S3C2410_GPG(4),
- .def_trigger = "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &mini2440_led1_pdata,
- },
-};
-
-static struct platform_device mini2440_led2 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &mini2440_led2_pdata,
- },
-};
-
-static struct platform_device mini2440_led3 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &mini2440_led3_pdata,
- },
-};
-
-static struct platform_device mini2440_led4 = {
- .name = "s3c24xx_led",
- .id = 4,
- .dev = {
- .platform_data = &mini2440_led4_pdata,
- },
-};
-
-static struct platform_device mini2440_led_backlight = {
- .name = "s3c24xx_led",
- .id = 5,
- .dev = {
- .platform_data = &mini2440_led_backlight_pdata,
- },
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
- .l3_clk = S3C2410_GPB(4),
- .l3_mode = S3C2410_GPB(2),
- .l3_data = S3C2410_GPB(3),
- .model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
- .name = "s3c24xx_uda134x",
- .id = 0,
- .dev = {
- .platform_data = &mini2440_audio_pins,
- },
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c08 = {
- .byte_len = SZ_8K / 8,
- .page_size = 16,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("24c08", 0x50),
- .platform_data = &at24c08,
- },
-};
-
-static struct platform_device uda1340_codec = {
- .name = "uda134x-codec",
- .id = -1,
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &mini2440_device_eth,
- &mini2440_led1,
- &mini2440_led2,
- &mini2440_led3,
- &mini2440_led4,
- &mini2440_button_device,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_iis,
- &uda1340_codec,
- &mini2440_audio,
- &samsung_asoc_dma,
-};
-
-static void __init mini2440_map_io(void)
-{
- s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
- if (str)
- strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
- return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
- int count;
- int done;
- int lcd_index;
- struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
-{
- const char * fp = features_str;
-
- features->count = 0;
- features->done = 0;
- features->lcd_index = -1;
-
- while (*fp) {
- char f = *fp++;
-
- switch (f) {
- case '0'...'9': /* tft screen */
- if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
- } else {
- int li = f - '0';
- if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n", f);
- else {
- features->optional[features->count++] =
- &s3c_device_lcd;
- features->lcd_index = li;
- }
- }
- features->done |= FEATURE_SCREEN;
- break;
- case 'b':
- if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
- else {
- features->optional[features->count++] =
- &mini2440_led_backlight;
- }
- features->done |= FEATURE_BACKLIGHT;
- break;
- case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
- break;
- case 'c':
- if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
- else
- features->optional[features->count++] =
- &s3c_device_camif;
- features->done |= FEATURE_CAMERA;
- break;
- }
- }
-}
-
-static void __init mini2440_init(void)
-{
- struct mini2440_features_t features = { 0 };
- int i;
-
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
- mini2440_features_str);
-
- /* Parse the feature string */
- mini2440_parse_features(&features, mini2440_features_str);
-
- /* turn LCD on */
- s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
- /* Turn the backlight early on */
- WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
- gpio_direction_output(S3C2410_GPG(4), 1);
-
- /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
- s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
- s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
- s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
-
- /* mark the key as input, without pullups (there is one on the board) */
- for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
- s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
- }
- if (features.lcd_index != -1) {
- int li;
-
- mini2440_fb_info.displays =
- &mini2440_lcd_cfg[features.lcd_index];
-
- printk(KERN_INFO "MINI2440: LCD");
- for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
- if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- else
- printk(" %d:%dx%d", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- printk("\n");
- s3c24xx_fb_set_platdata(&mini2440_fb_info);
- }
-
- s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
- s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
- s3c_nand_set_platdata(&mini2440_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- i2c_register_board_info(0, mini2440_i2c_devs,
- ARRAY_SIZE(mini2440_i2c_devs));
-
- platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
- if (features.count) /* the optional features */
- platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
- /* Maintainer: Michel Pollet <buserror@gmail.com> */
- .atag_offset = 0x100,
- .map_io = mini2440_map_io,
- .init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
- *
- * Copyright (c) 2004 Nex Vision
- * Guillaume GOURAT <guillaume.gourat@nexvision.tv>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 15-10-2004 GG Created initial version
- * 12-03-2005 BJD Updated for release
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
- /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
- [0] = {
- .start = S3C2410_CS0,
- .end = S3C2410_CS0 + (8*1024*1024) - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct map_info nexcoder_nor_map = {
- .bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
- .name = "mtd-flash",
- .id = -1,
- .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
- .resource = nexcoder_nor_resource,
- .dev =
- {
- .platform_data = &nexcoder_nor_map,
- }
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &s3c_device_camif,
- &s3c_device_spi0,
- &s3c_device_spi1,
- &nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
- // Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
- s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
- s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
- // Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
- s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
- s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
-}
-
-static void __init nexcoder_map_io(void)
-{
- s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-
- nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
- /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .atag_offset = 0x100,
- .map_io = nexcoder_map_io,
- .init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
- *
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Osiris Dynamic Voltage Scaling support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/cpu-freq.h>
-
-#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
- unsigned vregs1 = 0, vdcdc2 = 0;
-
- if (!on) {
- vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
- vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
- }
-
- dvs_en = on;
- vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
- vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
- tps65010_config_vregs1(vregs1);
- tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
- /* at the moment, we assume ARMCLK = HCLK => DVS */
- return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct cpufreq_freqs *cf = data;
- struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
- bool old_dvs = is_dvs(&freqs->old);
- bool new_dvs = is_dvs(&freqs->new);
- int ret = 0;
-
- if (!dvs_en)
- return 0;
-
- printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
- freqs->old.armclk, freqs->old.hclk,
- freqs->new.armclk, freqs->new.hclk);
-
- switch (val) {
- case CPUFREQ_PRECHANGE:
- if (old_dvs & !new_dvs ||
- cur_dvs & !new_dvs) {
- pr_debug("%s: exiting dvs\n", __func__);
- cur_dvs = false;
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- }
- break;
- case CPUFREQ_POSTCHANGE:
- if (!old_dvs & new_dvs ||
- !cur_dvs & new_dvs) {
- pr_debug("entering dvs\n");
- cur_dvs = true;
- gpio_set_value(OSIRIS_GPIO_DVS, 0);
- }
- break;
- }
-
- return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
- .notifier_call = osiris_dvs_notify,
-};
-
-static int __devinit osiris_dvs_probe(struct platform_device *pdev)
-{
- int ret;
-
- dev_info(&pdev->dev, "initialising\n");
-
- ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
- if (ret) {
- dev_err(&pdev->dev, "cannot claim gpio\n");
- goto err_nogpio;
- }
-
- /* start with dvs disabled */
- gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
- ret = cpufreq_register_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (ret) {
- dev_err(&pdev->dev, "failed to register with cpufreq\n");
- goto err_nofreq;
- }
-
- osiris_dvs_tps_setdvs(true);
-
- return 0;
-
-err_nofreq:
- gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
- return ret;
-}
-
-static int __devexit osiris_dvs_remove(struct platform_device *pdev)
-{
- dev_info(&pdev->dev, "exiting\n");
-
- /* disable any current dvs */
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
-
- cpufreq_unregister_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-
- gpio_free(OSIRIS_GPIO_DVS);
-
- return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
- cur_dvs = false;
-
- return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
- osiris_dvs_tps_setdvs(true);
- return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
- .suspend = osiris_dvs_suspend,
- .resume = osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
- .probe = osiris_dvs_probe,
- .remove = __devexit_p(osiris_dvs_remove),
- .driver = {
- .name = "osiris-dvs",
- .owner = THIS_MODULE,
- .pm = &osiris_dvs_pm,
- },
-};
-
-static int __init osiris_dvs_init(void)
-{
- return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
- platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
- * Copyright (c) 2005-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
- /* ISA IO areas (may be over-written later) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- },
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)OSIRIS_VA_CTRL0,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL1,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL2,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_IDREG,
- .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- }
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(OSIRIS_VA_CTRL0);
- tmp &= ~OSIRIS_CTRL0_NANDSEL;
- tmp |= slot;
-
- pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
- .tacls = 25,
- .twrph0 = 60,
- .twrph1 = 60,
- .nr_sets = ARRAY_SIZE(osiris_nand_sets),
- .sets = osiris_nand_sets,
- .select_chip = osiris_nand_select,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
- [0] = {
- .start = 0x0f000000,
- .end = 0x0f100000,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x0c000000,
- .end = 0x0c100000,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device osiris_pcmcia = {
- .name = "osiris-pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
- .resource = osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
- unsigned int tmp;
-
- pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
- tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
- /* ensure correct NAND slot is selected on resume */
- if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
- tmp |= 2;
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
- /* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
- return 0;
-}
-
-static void osiris_pm_resume(void)
-{
- if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
- __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
- __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
- .suspend = osiris_pm_suspend,
- .resume = osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
- /* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
- .name = "osiris-dvs",
- .id = -1,
- .dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
- osiris_tps_device.dev.parent = &client->dev;
- return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
- platform_device_unregister(&osiris_tps_device);
- return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
- .base = -1, /* GPIO can go anywhere at the moment */
- .setup = osiris_tps_setup,
- .teardown = osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- .platform_data = &osiris_tps_board,
- },
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
- &s3c_device_i2c0,
- &s3c_device_wdt,
- &s3c_device_nand,
- &osiris_pcmcia,
-};
-
-static struct clk *osiris_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
- .refresh = 7800, /* refresh period is 7.8usec */
- .auto_io = 1,
- .need_io = 1,
-};
-
-static void __init osiris_map_io(void)
-{
- unsigned long flags;
-
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
- s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_clocks(0);
- s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
- printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
- __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
- osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
- osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
- } else {
- /* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
- }
-
- /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
- local_irq_save(flags);
- __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
- local_irq_restore(flags);
-}
-
-static void __init osiris_init(void)
-{
- register_syscore_ops(&osiris_pm_syscore_ops);
-
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&osiris_nand_info);
-
- s3c_cpufreq_setboard(&osiris_cpufreq);
-
- i2c_register_board_info(0, osiris_i2c_devs,
- ARRAY_SIZE(osiris_i2c_devs));
-
- platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
- .init_machine = osiris_init,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
- * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
- * Copyright (c) 2007-2010 Vasily Khoruzhick
- *
- * based on smdk2440 written by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-#include <plat/ts.h>
-
-#include <sound/uda1380.h>
-
-#include "common.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0xf1,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
-};
-
-static struct s3c2410fb_display rx1950_display = {
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
-
- .pixclock = 260000,
- .left_margin = 10,
- .right_margin = 20,
- .hsync_len = 10,
- .upper_margin = 2,
- .lower_margin = 2,
- .vsync_len = 2,
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVCLK |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_HWSWP |
- (0x02 << 13) |
- (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
- return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
- return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
- "main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = rx1950_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = rx1950_supplicants,
- .num_supplicants = ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
- [0] = {
- .name = "ac",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
- IORESOURCE_IRQ_HIGHEDGE,
- .start = IRQ_EINT2,
- .end = IRQ_EINT2,
- },
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data =
- &power_supply_info,
- },
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
- { .volt = 4100, .cur = 156, .level = 100},
- { .volt = 4050, .cur = 156, .level = 95},
- { .volt = 4025, .cur = 141, .level = 90},
- { .volt = 3995, .cur = 144, .level = 85},
- { .volt = 3957, .cur = 162, .level = 80},
- { .volt = 3931, .cur = 147, .level = 75},
- { .volt = 3902, .cur = 147, .level = 70},
- { .volt = 3863, .cur = 153, .level = 65},
- { .volt = 3838, .cur = 150, .level = 60},
- { .volt = 3800, .cur = 153, .level = 55},
- { .volt = 3765, .cur = 153, .level = 50},
- { .volt = 3748, .cur = 172, .level = 45},
- { .volt = 3740, .cur = 153, .level = 40},
- { .volt = 3714, .cur = 175, .level = 35},
- { .volt = 3710, .cur = 156, .level = 30},
- { .volt = 3963, .cur = 156, .level = 25},
- { .volt = 3672, .cur = 178, .level = 20},
- { .volt = 3651, .cur = 178, .level = 15},
- { .volt = 3629, .cur = 178, .level = 10},
- { .volt = 3612, .cur = 162, .level = 5},
- { .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
- { .volt = 4200, .cur = 0, .level = 100},
- { .volt = 4190, .cur = 0, .level = 99},
- { .volt = 4178, .cur = 0, .level = 95},
- { .volt = 4110, .cur = 0, .level = 70},
- { .volt = 4076, .cur = 0, .level = 65},
- { .volt = 4046, .cur = 0, .level = 60},
- { .volt = 4021, .cur = 0, .level = 55},
- { .volt = 3999, .cur = 0, .level = 50},
- { .volt = 3982, .cur = 0, .level = 45},
- { .volt = 3965, .cur = 0, .level = 40},
- { .volt = 3957, .cur = 0, .level = 35},
- { .volt = 3948, .cur = 0, .level = 30},
- { .volt = 3936, .cur = 0, .level = 25},
- { .volt = 3927, .cur = 0, .level = 20},
- { .volt = 3906, .cur = 0, .level = 15},
- { .volt = 3880, .cur = 0, .level = 10},
- { .volt = 3829, .cur = 0, .level = 5},
- { .volt = 3820, .cur = 0, .level = 0},
-};
-
-int rx1950_bat_init(void)
-{
- int ret;
-
- ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
- if (ret)
- goto err_gpio1;
- ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
- if (ret)
- goto err_gpio2;
-
- return 0;
-
-err_gpio2:
- gpio_free(S3C2410_GPJ(2));
-err_gpio1:
- return ret;
-}
-
-void rx1950_bat_exit(void)
-{
- gpio_free(S3C2410_GPJ(2));
- gpio_free(S3C2410_GPJ(3));
-}
-
-void rx1950_enable_charger(void)
-{
- gpio_direction_output(S3C2410_GPJ(2), 1);
- gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-void rx1950_disable_charger(void)
-{
- gpio_direction_output(S3C2410_GPJ(2), 0);
- gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(unsigned gpio, int state,
- unsigned long *delay_on, unsigned long *delay_off)
-{
- int blink_gpio, check_gpio;
-
- switch (gpio) {
- case S3C2410_GPA(6):
- blink_gpio = S3C2410_GPA(4);
- check_gpio = S3C2410_GPA(3);
- break;
- case S3C2410_GPA(7):
- blink_gpio = S3C2410_GPA(3);
- check_gpio = S3C2410_GPA(4);
- break;
- default:
- return -EINVAL;
- break;
- }
-
- if (delay_on && delay_off && !*delay_on && !*delay_off)
- *delay_on = *delay_off = 500;
-
- spin_lock(&rx1950_blink_spin);
-
- switch (state) {
- case GPIO_LED_NO_BLINK_LOW:
- case GPIO_LED_NO_BLINK_HIGH:
- if (!gpio_get_value(check_gpio))
- gpio_set_value(S3C2410_GPJ(6), 0);
- gpio_set_value(blink_gpio, 0);
- gpio_set_value(gpio, state);
- break;
- case GPIO_LED_BLINK:
- gpio_set_value(gpio, 0);
- gpio_set_value(S3C2410_GPJ(6), 1);
- gpio_set_value(blink_gpio, 1);
- break;
- }
-
- spin_unlock(&rx1950_blink_spin);
-
- return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
- {
- .name = "Green",
- .default_trigger = "main-battery-full",
- .gpio = S3C2410_GPA(6),
- .retain_state_suspended = 1,
- },
- {
- .name = "Red",
- .default_trigger
- = "main-battery-charging-blink-full-solid",
- .gpio = S3C2410_GPA(7),
- .retain_state_suspended = 1,
- },
- {
- .name = "Blue",
- .default_trigger = "rx1950-acx-mem",
- .gpio = S3C2410_GPA(11),
- .retain_state_suspended = 1,
- },
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
- .num_leds = ARRAY_SIZE(rx1950_leds_desc),
- .leds = rx1950_leds_desc,
- .gpio_blink_set = rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rx1950_leds_pdata,
- },
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
- .init = rx1950_bat_init,
- .exit = rx1950_bat_exit,
- .enable_charger = rx1950_enable_charger,
- .disable_charger = rx1950_disable_charger,
- .gpio_charge_finished = S3C2410_GPF(3),
- .lut_noac = bat_lut_noac,
- .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
- .lut_acin = bat_lut_acin,
- .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
- .volt_channel = 0,
- .current_channel = 1,
- .volt_mult = 4235,
- .current_mult = 2900,
- .internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
- .name = "s3c-adc-battery",
- .id = -1,
- .dev = {
- .parent = &s3c_device_adc.dev,
- .platform_data = &rx1950_bat_cfg,
- },
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
- .displays = &rx1950_display,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0x02,
- .gpccon = 0xaa9556a9,
- .gpccon_mask = 0xffc003fc,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
-
- .gpdcon = 0xaa90aaa1,
- .gpdcon_mask = 0xffc0fff0,
- .gpdup = 0x0000fcfd,
- .gpdup_mask = 0xffffffff,
-
-};
-
-static struct pwm_device *lcd_pwm;
-
-void rx1950_lcd_power(int enable)
-{
- int i;
- static int enabled;
- if (enabled == enable)
- return;
- if (!enable) {
-
- /* GPC11-GPC15->OUTPUT */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPC(i), 1);
-
- /* Wait a bit here... */
- mdelay(100);
-
- /* GPD2-GPD7->OUTPUT */
- /* GPD11-GPD15->OUTPUT */
- /* GPD2-GPD7->1, GPD11-GPD15->1 */
- for (i = 2; i < 8; i++)
- gpio_direction_output(S3C2410_GPD(i), 1);
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPD(i), 1);
-
- /* Wait a bit here...*/
- mdelay(100);
-
- /* GPB0->OUTPUT, GPB0->0 */
- gpio_direction_output(S3C2410_GPB(0), 0);
-
- /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
- for (i = 1; i < 5; i++)
- gpio_direction_output(S3C2410_GPC(i), 0);
-
- /* GPC15-GPC11->0 */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPC(i), 0);
-
- /* GPD15-GPD11->0, GPD2->GPD7->0 */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPD(i), 0);
-
- for (i = 2; i < 8; i++)
- gpio_direction_output(S3C2410_GPD(i), 0);
-
- /* GPC6->0, GPC7->0, GPC5->0 */
- gpio_direction_output(S3C2410_GPC(6), 0);
- gpio_direction_output(S3C2410_GPC(7), 0);
- gpio_direction_output(S3C2410_GPC(5), 0);
-
- /* GPB1->OUTPUT, GPB1->0 */
- gpio_direction_output(S3C2410_GPB(1), 0);
- pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
- pwm_disable(lcd_pwm);
-
- /* GPC0->0, GPC10->0 */
- gpio_direction_output(S3C2410_GPC(0), 0);
- gpio_direction_output(S3C2410_GPC(10), 0);
- } else {
- pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
- pwm_enable(lcd_pwm);
-
- gpio_direction_output(S3C2410_GPC(0), 1);
- gpio_direction_output(S3C2410_GPC(5), 1);
-
- s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
- gpio_direction_output(S3C2410_GPC(7), 1);
-
- for (i = 1; i < 5; i++)
- s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
- for (i = 11; i < 16; i++)
- s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
- for (i = 2; i < 8; i++)
- s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
- for (i = 11; i < 16; i++)
- s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
- gpio_direction_output(S3C2410_GPC(10), 1);
- gpio_direction_output(S3C2410_GPC(6), 1);
- }
- enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
- static int enabled;
- if (enabled == enable)
- return;
- if (!enable) {
- gpio_direction_output(S3C2410_GPB(0), 0);
- } else {
- /* LED driver need a "push" to power on */
- gpio_direction_output(S3C2410_GPB(0), 1);
- /* Warm up backlight for one period of PWM.
- * Without this trick its almost impossible to
- * enable backlight with low brightness value
- */
- ndelay(48000);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
- }
- enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
- WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
- lcd_pwm = pwm_request(1, "RX1950 LCD");
- if (IS_ERR(lcd_pwm)) {
- dev_err(dev, "Unable to request PWM for LCD power!\n");
- return PTR_ERR(lcd_pwm);
- }
-
- rx1950_lcd_power(1);
- rx1950_bl_power(1);
-
- return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
- rx1950_bl_power(0);
- rx1950_lcd_power(0);
-
- pwm_free(lcd_pwm);
- gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
- if (!brightness) {
- rx1950_bl_power(0);
- rx1950_lcd_power(0);
- } else {
- rx1950_lcd_power(1);
- rx1950_bl_power(1);
- }
- return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
- .pwm_id = 0,
- .max_brightness = 24,
- .dft_brightness = 4,
- .pwm_period_ns = 48000,
- .init = rx1950_backlight_init,
- .notify = rx1950_backlight_notify,
- .exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[0].dev,
- .platform_data = &rx1950_backlight_data,
- },
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
- switch (power_mode) {
- case MMC_POWER_OFF:
- gpio_direction_output(S3C2410_GPJ(1), 0);
- break;
- case MMC_POWER_UP:
- case MMC_POWER_ON:
- gpio_direction_output(S3C2410_GPJ(1), 1);
- break;
- default:
- break;
- }
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPF(5),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = rx1950_set_mmc_power,
- .ocr_avail = MMC_VDD_32_33,
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
- [0] = {
- .name = "Boot0",
- .offset = 0,
- .size = 0x4000,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "Boot1",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x40000,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x300000,
- .mask_flags = 0,
- },
- [3] = {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
- [0] = {
- .name = "Internal",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
- .partitions = rx1950_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
- .tacls = 25,
- .twrph0 = 50,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
- .sets = rx1950_nand_sets,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = S3C2410_GPJ(5),
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
- {
- .code = KEY_POWER,
- .gpio = S3C2410_GPF(0),
- .active_low = 1,
- .desc = "Power button",
- .wakeup = 1,
- },
- {
- .code = KEY_F5,
- .gpio = S3C2410_GPF(7),
- .active_low = 1,
- .desc = "Record button",
- },
- {
- .code = KEY_F1,
- .gpio = S3C2410_GPG(0),
- .active_low = 1,
- .desc = "Calendar button",
- },
- {
- .code = KEY_F2,
- .gpio = S3C2410_GPG(2),
- .active_low = 1,
- .desc = "Contacts button",
- },
- {
- .code = KEY_F3,
- .gpio = S3C2410_GPG(3),
- .active_low = 1,
- .desc = "Mail button",
- },
- {
- .code = KEY_F4,
- .gpio = S3C2410_GPG(7),
- .active_low = 1,
- .desc = "WLAN button",
- },
- {
- .code = KEY_LEFT,
- .gpio = S3C2410_GPG(10),
- .active_low = 1,
- .desc = "Left button",
- },
- {
- .code = KEY_RIGHT,
- .gpio = S3C2410_GPG(11),
- .active_low = 1,
- .desc = "Right button",
- },
- {
- .code = KEY_UP,
- .gpio = S3C2410_GPG(4),
- .active_low = 1,
- .desc = "Up button",
- },
- {
- .code = KEY_DOWN,
- .gpio = S3C2410_GPG(6),
- .active_low = 1,
- .desc = "Down button",
- },
- {
- .code = KEY_ENTER,
- .gpio = S3C2410_GPG(9),
- .active_low = 1,
- .desc = "Ok button"
- },
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
- .buttons = rx1950_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
- .name = "gpio-keys",
- .dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
- .gpio_power = S3C2410_GPJ(0),
- .gpio_reset = S3C2410_GPD(0),
- .dac_clk = UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
- {
- I2C_BOARD_INFO("uda1380", 0x1a),
- .platform_data = &uda1380_info,
- },
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &samsung_asoc_dma,
- &s3c_device_usbgadget,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_adc,
- &s3c_device_ts,
- &s3c_device_timer[0],
- &s3c_device_timer[1],
- &rx1950_backlight,
- &rx1950_device_gpiokeys,
- &power_supply,
- &rx1950_battery,
- &rx1950_leds,
-};
-
-static struct clk *rx1950_clocks[] __initdata = {
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
-};
-
-static void __init rx1950_map_io(void)
-{
- s3c24xx_clkout0.parent = &clk_h;
- s3c24xx_clkout1.parent = &clk_f;
-
- s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
- s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
- s3c24xx_init_clocks(16934000);
- s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
-
- /* setup PM */
-
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
- s3c_pm_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
- int i;
-
- s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
- s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
- s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
- s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&rx1950_nand_info);
-
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- /* mmc power is disabled by default */
- WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
- gpio_direction_output(S3C2410_GPJ(1), 0);
-
- for (i = 0; i < 8; i++)
- WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
- for (i = 10; i < 16; i++)
- WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
- for (i = 2; i < 8; i++)
- WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
- for (i = 11; i < 16; i++)
- WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
- WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
- WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
- WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
- WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
- gpio_direction_output(S3C2410_GPA(3), 0);
- gpio_direction_output(S3C2410_GPA(4), 0);
- gpio_direction_output(S3C2410_GPJ(6), 0);
-
- platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
- i2c_register_board_info(0, rx1950_i2c_devices,
- ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
- memblock_reserve(0x30003000, 0x1000);
- memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
- /* Maintainers: Vasily Khoruzhick */
- .atag_offset = 0x100,
- .map_io = rx1950_map_io,
- .reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
- .init_machine = rx1950_init_machine,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/rx3715.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/h1940.h>
-#include <plat/nand.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
- /* dump ISA space somewhere unused */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x00,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .uart_flags = UPF_CONS_FLOW,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- }
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
- .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
-
- .pixclock = 260000,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 36,
- .right_margin = 36,
- .hsync_len = 8,
- .upper_margin = 6,
- .lower_margin = 7,
- .vsync_len = 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
- .displays = &rx3715_lcdcfg,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0xf82,
-
- .gpccon = 0xaa955699,
- .gpccon_mask = 0xffc003cc,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
-
- .gpdcon = 0xaa95aaa1,
- .gpdcon_mask = 0xffc0fff0,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
- [0] = {
- .name = "Whole Flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
- [0] = {
- .name = "Internal",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
- .partitions = rx3715_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
- .tacls = 25,
- .twrph0 = 50,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
- .sets = rx3715_nand_sets,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
- s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_clocks(16934000);
- s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
- memblock_reserve(0x30003000, 0x1000);
- memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
- s3c_pm_init();
-
- s3c_nand_set_platdata(&rx3715_nand_info);
- s3c24xx_fb_set_platdata(&rx3715_fb_info);
- platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
- .map_io = rx3715_map_io,
- .reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
- .init_machine = rx3715_init_machine,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-#include "common.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
- /* ISA IO Space map (memory space selected by A24) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- }
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 240,
- .height = 320,
-
- .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 20,
- .right_margin = 8,
- .hsync_len = 4,
- .upper_margin = 8,
- .lower_margin = 7,
- .vsync_len = 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
- .displays = &smdk2440_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-
-#if 0
- /* currently setup by downloader */
- .gpccon = 0xaa940659,
- .gpccon_mask = 0xffffffff,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpdcon = 0xaa84aaa0,
- .gpdcon_mask = 0xffffffff,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
-#endif
-
- .lpcsel = ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
- s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_clocks(16934400);
- s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-}
-
-static void __init smdk2440_machine_init(void)
-{
- s3c24xx_fb_set_platdata(&smdk2440_fb_info);
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .init_irq = s3c24xx_init_irq,
- .map_io = smdk2440_map_io,
- .init_machine = smdk2440_machine_init,
- .timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/s3c2440.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-#include <plat/watchdog-reset.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct device s3c2440_dev = {
- .bus = &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
- printk("S3C2440: Initialising architecture\n");
-
- /* change irq for watchdog */
-
- s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
- s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
-
- /* register suspend/resume handlers */
-
-#ifdef CONFIG_PM
- register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
- register_syscore_ops(&s3c244x_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
- /* register our system device for everything else */
-
- return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
- s3c244x_map_io();
-
- s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
-
-void s3c2440_restart(char mode, const char *cmd)
-{
- if (mode == 's') {
- soft_restart(0);
- }
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 core and lock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
-
- if (div == 3)
- return parent_rate / 3;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div /= 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2442_camif_upll_round(clk, rate);
-
- camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
- if (rate == parent_rate) {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
- } else if ((parent_rate / rate) == 3) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
- } else {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
- },
-};
-
-static int s3c2442_clk_add(struct device *dev)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2442_clk_cam.parent = clock_h;
- s3c2442_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2442_clk_cam);
- s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
- clk_disable(&s3c2442_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
-static struct device s3c2442_dev = {
- .bus = &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
- printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM
- register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
- register_syscore_ops(&s3c244x_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
- return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
- s3c244x_map_io();
-
- s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
- s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long camdivn;
- unsigned long dvs;
-
- if (parent == &clk_f)
- dvs = 0;
- else if (parent == &clk_h)
- dvs = S3C2440_CAMDIVN_DVSEN;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- camdivn = __raw_readl(S3C2440_CAMDIVN);
- camdivn &= ~S3C2440_CAMDIVN_DVSEN;
- camdivn |= dvs;
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2440_setparent_armclk,
- },
-};
-
-static int s3c244x_clk_add(struct device *dev)
-{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
- struct clk *clock_upll;
- int ret;
-
- printk("S3C244X: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
- clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
- ret = s3c24xx_register_clock(&clk_arm);
- if (ret < 0) {
- printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
- return ret;
- }
-
- clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
- return -ENOENT;
- }
-
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- spin_lock(&clocks_lock);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- spin_unlock(&clocks_lock);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
- IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
- /* register our io-tables */
-
- iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
- /* rename any peripherals used differing from the s3c2410 */
-
- s3c_device_sdi.name = "s3c2440-sdi";
- s3c_device_i2c0.name = "s3c2440-i2c";
- s3c_nand_setname("s3c2440-nand");
- s3c_device_ts.name = "s3c2440-ts";
- s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long clkdiv;
- unsigned long camdiv;
- unsigned long xtal;
- unsigned long hclk, fclk, pclk;
- int hdiv = 1;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- /* work out clock scalings */
-
- switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
- case S3C2440_CLKDIVN_HDIVN_1:
- hdiv = 1;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 2;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_4_8:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_3_6:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
- break;
- }
-
- hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brief summary of clocks, etc */
-
- printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them, and to add new ones after the initialisation
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c244x_setup_clocks();
- s3c2410_baseclk_add();
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
- .name = "s3c2440-core",
- .dev_name = "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
- .name = "s3c2442-core",
- .dev_name = "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
- return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
- return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM
-static struct sleep_save s3c244x_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
- s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-static void s3c244x_resume(void)
-{
- s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume NULL
-#endif
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume,
-};
help
Support for the S3C2416 SoC from the S3C24XX line
+config CPU_S3C2440
+ bool "SAMSUNG S3C2440"
+ select CPU_ARM920T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select S3C2440_DMA if S3C24XX_DMA
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+ bool "SAMSUNG S3C2442"
+ select CPU_ARM920T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+ def_bool y
+ depends on CPU_S3C2440 || CPU_S3C2442
+
if CPU_S3C2410
config S3C2410_DMA
bool
- depends on S3C24XX_DMA && CPU_S3C2410
- default y if CPU_S3C2410
+ depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
endif # CPU_S3C2416
+if CPU_S3C2440
+
+config S3C2440_DMA
+ bool
+ help
+ Support for S3C2440 specific DMA code5A
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select S3C24XX_DCLK
+ select PM_SIMTEC if PM
+ select HAVE_PATA_PLATFORM
+ select S3C24XX_GPIO_EXTRA64
+ select S3C2440_XTAL_12000000
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_AT2440EVB
+ bool "Avantech AT2440EVB development board"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+ bool "MINI2440 development board"
+ select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
+ select LEDS_TRIGGER_BACKLIGHT
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+ available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select S3C2440_XTAL_12000000
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C24XX_DCLK
+ select PM_SIMTEC if PM
+ select S3C24XX_GPIO_EXTRA128
+ select S3C2440_XTAL_12000000
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_OSIRIS_DVS
+ tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+ depends on MACH_OSIRIS
+ select TPS65010
+ help
+ Say Y/M here if you want to have dynamic voltage scaling support
+ on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+ The DVS driver alters the voltage supplied to the ARM core
+ depending on the frequency it is running at. The driver itself
+ does not do any of the frequency alteration, which is left up
+ to the cpufreq driver.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select S3C2440_XTAL_16934400
+ select PM_H1940 if PM
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select S3C2440_XTAL_16934400
+ select MACH_SMDK
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
+
+endif # CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+ bool "HP iPAQ rx1950"
+ select S3C24XX_DCLK
+ select PM_H1940 if PM
+ select I2C
+ select S3C2410_PWM
+ select S3C_DEV_NAND
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_16934400
+ help
+ Say Y here if you're using HP iPAQ rx1950
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+
+endif # CPU_S3C2440
+
endmenu # SAMSUNG S3C24XX SoCs Support
endif # ARCH_S3C24XX
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
+
#
# machine support
# following is ordered alphabetically by option text.
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
+
# common bits of machine support
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
# machine additions
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+
+#include <mach/hardware.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+
+/* S3C2440 extended clock support */
+
+static unsigned long s3c2440_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div = (parent_rate / rate) / 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2440_camif_upll_round(clk, rate);
+
+ camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
+
+ if (rate != parent_rate) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2440 clocks */
+
+static struct clk s3c2440_clk_cam = {
+ .name = "camif",
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2440_clk_cam_upll = {
+ .name = "camif-upll",
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2440_camif_upll_setrate,
+ .round_rate = s3c2440_camif_upll_round,
+ },
+};
+
+static struct clk s3c2440_clk_ac97 = {
+ .name = "ac97",
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
+{
+ unsigned long ucon0, ucon1, ucon2, divisor;
+
+ /* the fun of calculating the uart divisors on the s3c2440 */
+ ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+ ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+ ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+ ucon0 &= S3C2440_UCON0_DIVMASK;
+ ucon1 &= S3C2440_UCON1_DIVMASK;
+ ucon2 &= S3C2440_UCON2_DIVMASK;
+
+ if (ucon0 != 0)
+ divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
+ else if (ucon1 != 0)
+ divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
+ else if (ucon2 != 0)
+ divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
+ else
+ /* manual calims 44, seems to be 9 */
+ divisor = 9;
+
+ return clk_get_rate(clk->parent) / divisor;
+}
+
+static struct clk s3c2440_clk_fclk_n = {
+ .name = "fclk_n",
+ .parent = &clk_f,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2440_fclk_n_getrate,
+ },
+};
+
+static struct clk_lookup s3c2440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+};
+
+static int s3c2440_clk_add(struct device *dev)
+{
+ struct clk *clock_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ s3c2440_clk_cam.parent = clock_h;
+ s3c2440_clk_ac97.parent = clock_p;
+ s3c2440_clk_cam_upll.parent = clock_upll;
+ s3c24xx_register_clock(&s3c2440_clk_fclk_n);
+
+ s3c24xx_register_clock(&s3c2440_clk_ac97);
+ s3c24xx_register_clock(&s3c2440_clk_cam);
+ s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+ clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
+
+ clk_disable(&s3c2440_clk_ac97);
+ clk_disable(&s3c2440_clk_cam);
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_clk_interface = {
+ .name = "s3c2440_clk",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_clk_add,
+};
+
+static __init int s3c24xx_clk_init(void)
+{
+ return subsys_interface_register(&s3c2440_clk_interface);
+}
+
+arch_initcall(s3c24xx_clk_init);
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
+ *
+ * Copyright (c) 2004-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long camdivn;
+ unsigned long dvs;
+
+ if (parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2440_CAMDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ camdivn = __raw_readl(S3C2440_CAMDIVN);
+ camdivn &= ~S3C2440_CAMDIVN_DVSEN;
+ camdivn |= dvs;
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2440_setparent_armclk,
+ },
+};
+
+static int s3c244x_clk_add(struct device *dev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clock_upll;
+ int ret;
+
+ printk("S3C244X: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
+
+ ret = s3c24xx_register_clock(&clk_arm);
+ if (ret < 0) {
+ printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
+ return ret;
+ }
+
+ clock_upll = clk_get(NULL, "upll");
+ if (IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
+ return -ENOENT;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+ spin_lock(&clocks_lock);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ spin_unlock(&clocks_lock);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_clk_interface = {
+ .name = "s3c2440_clk",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_clk_add,
+};
+
+static int s3c2440_clk_init(void)
+{
+ return subsys_interface_register(&s3c2440_clk_interface);
+}
+
+arch_initcall(s3c2440_clk_init);
+
+static struct subsys_interface s3c2442_clk_interface = {
+ .name = "s3c2442_clk",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_clk_add,
+};
+
+static int s3c2442_clk_init(void)
+{
+ return subsys_interface_register(&s3c2442_clk_interface);
+}
+
+arch_initcall(s3c2442_clk_init);
#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
#define __ARCH_ARM_MACH_S3C2410_COMMON_H
+#ifdef CONFIG_CPU_S3C2410
void s3c2410_restart(char mode, const char *cmd);
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+void s3c2440_restart(char mode, const char *cmd);
+#endif
#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/dma.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+
+#include <plat/dma-s3c24xx.h>
+#include <plat/cpu.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
+#include <plat/regs-iis.h>
+#include <plat/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ },
+ [DMACH_PCM_IN] = {
+ .name = "pcm-in",
+ .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
+ .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
+ },
+ [DMACH_PCM_OUT] = {
+ .name = "pcm-out",
+ .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
+ },
+ [DMACH_MIC_IN] = {
+ .name = "mic-in",
+ .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
+};
+
+static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
+ .select = s3c2440_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2440_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2440_dma_mappings),
+};
+
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 1 | DMA_CH_VALID,
+ [3] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_OUT] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_IN] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_OUT] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 3 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_MIC_IN] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
+
+static int __init s3c2440_dma_add(struct device *dev)
+{
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2440_dma_order);
+ return s3c24xx_dma_init_map(&s3c2440_dma_sel);
+}
+
+static struct subsys_interface s3c2440_dma_interface = {
+ .name = "s3c2440_dma",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_dma_add,
+};
+
+static int __init s3c2440_dma_init(void)
+{
+ return subsys_interface_register(&s3c2440_dma_interface);
+}
+
+arch_initcall(s3c2440_dma_init);
+
--- /dev/null
+#ifndef _GTA02_H
+#define _GTA02_H
+
+#include <mach/regs-gpio.h>
+
+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
+#define GTA02v1_SYSTEM_REV 0x00000310
+#define GTA02v2_SYSTEM_REV 0x00000320
+#define GTA02v3_SYSTEM_REV 0x00000330
+#define GTA02v4_SYSTEM_REV 0x00000340
+#define GTA02v5_SYSTEM_REV 0x00000350
+/* since A7 is basically same as A6, we use A6 PCB ID */
+#define GTA02v6_SYSTEM_REV 0x00000360
+
+#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
+
+#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
+#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
+#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
+#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
+#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
+#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
+#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
+#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
+#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
+
+#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
+
+#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
+#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
+#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
+
+#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
+#define GTA02_GPIO_IO1 S3C2410_GPF(1)
+#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
+#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
+
+#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
+#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
+#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
+
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
+#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
+#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
+#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
+#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
+#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
+#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
+#define GTA02_IRQ_MODEM IRQ_EINT1
+#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
+#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
+#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
+#define GTA02_IRQ_AUX IRQ_EINT6
+#define GTA02_IRQ_nHOLD IRQ_EINT7
+#define GTA02_IRQ_PCF50633 IRQ_EINT9
+#define GTA02_IRQ_3D IRQ_EINT12
+#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
+#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
+
+/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
+#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
+#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
+#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
+#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
+#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
+
+int gta02_get_pcb_revision(void);
+
+#endif /* _GTA02_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/irq.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_WDT);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_AC97);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .irq_mask = s3c_irq_wdtac97_mask,
+ .irq_unmask = s3c_irq_wdtac97_unmask,
+ .irq_ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct device *dev)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static void
+s3c_irq_cam_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+ .irq_mask = s3c_irq_cam_mask,
+ .irq_unmask = s3c_irq_cam_unmask,
+ .irq_ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct device *dev)
+{
+ unsigned int irqno;
+
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+ return subsys_interface_register(&s3c2442_irq_interface);
+}
+
+arch_initcall(s3c2442_irq_init);
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
+ *
+ * Copyright 2003-2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <net/ax88796.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/audio-simtec.h>
+
+#include "common.h"
+
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)ANUBIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)ANUBIS_VA_IDREG,
+ .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+};
+
+/* IDE channels */
+
+static struct pata_platform_info anubis_ide_platdata = {
+ .ioport_shift = 5,
+};
+
+static struct resource anubis_ide0_resource[] = {
+ {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS3 + (1<<26) + (6*32),
+ .end = S3C2410_CS3 + (1<<26) + (7*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device anubis_device_ide0 = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_ide0_resource),
+ .resource = anubis_ide0_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+static struct resource anubis_ide1_resource[] = {
+ {
+ .start = S3C2410_CS4,
+ .end = S3C2410_CS4 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS4 + (1<<26) + (6*32),
+ .end = S3C2410_CS4 + (1<<26) + (7*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device anubis_device_ide1 = {
+ .name = "pata_platform",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(anubis_ide1_resource),
+ .resource = anubis_ide1_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5,
+ .end = S3C2410_CS5 + (0x20 * 0x20) -1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = IRQ_ASIX,
+ .end = IRQ_ASIX,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device anubis_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_asix_resource),
+ .resource = anubis_asix_resource,
+ .dev = {
+ .platform_data = &anubis_asix_platdata,
+ }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+ [0] = {
+ .start = S3C2410_CS2,
+ .end = S3C2410_CS2 + SZ_8M,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS2 + SZ_64M - SZ_2M,
+ .end = S3C2410_CS2 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT0,
+ .end = IRQ_EINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ .devices = SM501_USE_GPIO,
+
+ /* set the SDRAM and bus clocks */
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+ [0] = {
+ .bus_num = 1,
+ .pin_scl = 44,
+ .pin_sda = 45,
+ },
+ [1] = {
+ .bus_num = 2,
+ .pin_scl = 40,
+ .pin_sda = 41,
+ },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+ .init = &anubis_sm501_initdata,
+ .gpio_base = -1,
+ .gpio_i2c = anubis_sm501_gpio_i2c,
+ .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_sm501_resource),
+ .resource = anubis_sm501_resource,
+ .dev = {
+ .platform_data = &anubis_sm501_platdata,
+ },
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &anubis_device_ide0,
+ &anubis_device_ide1,
+ &anubis_device_asix,
+ &anubis_device_sm501,
+};
+
+static struct clk *anubis_clocks[] __initdata = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ }
+};
+
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+ .output_cdclk = 1,
+ .use_mpllin = 1,
+ .amp_gpio = S3C2410_GPB(2),
+ .amp_gain[0] = S3C2410_GPD(10),
+ .amp_gain[1] = S3C2410_GPD(11),
+};
+
+static void __init anubis_map_io(void)
+{
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = &clk_upll;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = &clk_upll;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
+
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+ printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+ __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+ anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+ anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+ } else {
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ }
+}
+
+static void __init anubis_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&anubis_nand_info);
+ simtec_audio_add(NULL, false, &anubis_audio);
+
+ platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+ i2c_register_board_info(0, anubis_i2c_devs,
+ ARRAY_SIZE(anubis_i2c_devs));
+}
+
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = anubis_map_io,
+ .init_machine = anubis_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ * and modifications by SBZ <sbz@spgui.org> and
+ * Weibing <http://weibing.blogbus.com>
+ *
+ * For product information, visit http://www.arm.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/mci.h>
+
+#include "common.h"
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+ /* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_2M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "Root",
+ .offset = SZ_256K + SZ_2M,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
+ .partitions = at2440evb_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
+ .sets = at2440evb_nand_sets,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+ [0] = {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS3 + 4,
+ .end = S3C2410_CS3 + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
+ .resource = at2440evb_dm9k_resource,
+ .dev = {
+ .platform_data = &at2440evb_dm9k_pdata,
+ },
+};
+
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
+ .gpio_detect = S3C2410_GPG(10),
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 800,
+ .height = 480,
+
+ .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
+ .xres = 800,
+ .yres = 480,
+ .bpp = 16,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .vsync_len = 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+ .displays = &at2440evb_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_lcd,
+ &at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+ s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+}
+
+static void __init at2440evb_init(void)
+{
+ s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
+ s3c_nand_set_platdata(&at2440evb_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+ .atag_offset = 0x100,
+ .map_io = at2440evb_map_io,
+ .init_machine = at2440evb_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+ *
+ * Copyright (C) 2006-2009 by Openmoko, Inc.
+ * Authors: Harald Welte <laforge@openmoko.org>
+ * Andy Green <andy@openmoko.org>
+ * Werner Almesberger <werner@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+
+#include <plat/usb-control.h>
+#include <mach/regs-mem.h>
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/ts.h>
+
+#include "common.h"
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called frequently when we paniced.
+ */
+
+static long gta02_panic_blink(int state)
+{
+ long delay = 0;
+ char led;
+
+ led = (state) ? 1 : 0;
+ gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+ return delay;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+ {
+ .virtual = 0xe0000000,
+ .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+ int ma;
+
+ /* Interpret charger type */
+ if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+ /*
+ * Sanity - stop GPO driving out now that we have a 1A charger
+ * GPO controls USB Host power generation on GTA02
+ */
+ pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+ ma = 1000;
+ } else
+ ma = 100;
+
+ pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+ if (gta02_usb_vbus_draw) {
+ pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+ return;
+ }
+
+#ifdef CONFIG_PCF50633_ADC
+ pcf50633_adc_async_read(gta02_pcf,
+ PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16,
+ gta02_configure_pmu_for_charger,
+ NULL);
+#else
+ /*
+ * If the PCF50633 ADC is disabled we fallback to a
+ * 100mA limit for safety.
+ */
+ pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+ if (irq == PCF50633_IRQ_USBINS) {
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+ return;
+ }
+
+ if (irq == PCF50633_IRQ_USBREM) {
+ cancel_delayed_work_sync(>a02_charger_work);
+ gta02_usb_vbus_draw = 0;
+ }
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+ if (!gta02_pcf)
+ return;
+
+ gta02_usb_vbus_draw = ma;
+
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback NULL
+#define gta02_udc_vbus_draw NULL
+#endif
+
+/*
+ * This is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+
+
+static char *gta02_batteries[] = {
+ "battery",
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+ .resumers = {
+ [0] = PCF50633_INT1_USBINS |
+ PCF50633_INT1_USBREM |
+ PCF50633_INT1_ALARM,
+ [1] = PCF50633_INT2_ONKEYF,
+ [2] = PCF50633_INT3_ONKEY1S,
+ [3] = PCF50633_INT4_LOWSYS |
+ PCF50633_INT4_LOWBAT |
+ PCF50633_INT4_HIGHTMP,
+ },
+
+ .batteries = gta02_batteries,
+ .num_batteries = ARRAY_SIZE(gta02_batteries),
+
+ .charger_reference_current_ma = 1000,
+
+ .backlight_data = >a02_backlight_data,
+
+ .reg_init_data = {
+ [PCF50633_REGULATOR_AUTO] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN1] = {
+ .constraints = {
+ .min_uV = 1300000,
+ .max_uV = 1600000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN2] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ },
+ [PCF50633_REGULATOR_HCLDO] = {
+ .constraints = {
+ .min_uV = 2000000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [PCF50633_REGULATOR_LDO1] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO2] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO3] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO4] = {
+ .constraints = {
+ .min_uV = 3200000,
+ .max_uV = 3200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO5] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO6] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+ [PCF50633_REGULATOR_MEMLDO] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+
+ },
+ .probe_done = gta02_pmu_attach_child_devices,
+ .mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+ .start = GTA02_FLASH_BASE,
+ .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = >a02_nor_flash_data,
+ },
+ .resource = >a02_nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+ .name = "s3c24xx_pwm",
+ .num_resources = 0,
+};
+
+static struct platform_device gta02_dfbmcs320_device = {
+ .name = "dfbmcs320",
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf50633", 0x73),
+ .irq = GTA02_IRQ_PCF50633,
+ .platform_data = >a02_pcf_pdata,
+ },
+ {
+ I2C_BOARD_INFO("wm8753", 0x1a),
+ },
+};
+
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
+ [0] = {
+ /*
+ * This name is also hard-coded in the boot loaders, so
+ * changing it would would require all users to upgrade
+ * their boot loaders, some of which are stored in a NOR
+ * that is considered to be immutable.
+ */
+ .name = "neo1973-nand",
+ .nr_chips = 1,
+ .flash_bbt = 1,
+ },
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(gta02_nand_sets),
+ .sets = gta02_nand_sets,
+};
+
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
+ .vbus_draw = gta02_udc_vbus_draw,
+ .pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .oversampling_shift = 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_buttons_pdata,
+ },
+};
+
+static void __init gta02_map_io(void)
+{
+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &s3c_device_nand,
+ >a02_nor_flash,
+ &s3c24xx_pwm_device,
+ &s3c_device_iis,
+ &samsung_asoc_dma,
+ &s3c_device_i2c0,
+ >a02_dfbmcs320_device,
+ >a02_buttons_device,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+/* These guys DO need to be children of PMU. */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+};
+
+
+/*
+ * This is called when pc50633 is probed, quite late in the day since it is an
+ * I2C bus device. Here we can define platform devices with the advantage that
+ * we can mark the pcf50633 as the parent. This makes them get suspended and
+ * resumed with their parent the pcf50633 still around. All devices whose
+ * operation depends on something from pcf50633 must have this relationship
+ * made explicit like this, or suspend and resume will become an unreliable
+ * hellworld.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+ int n;
+
+ /* Grab a copy of the now probed PMU pointer. */
+ gta02_pcf = pcf;
+
+ for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+ gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+ platform_add_devices(gta02_devices_pmu_children,
+ ARRAY_SIZE(gta02_devices_pmu_children));
+}
+
+static void gta02_poweroff(void)
+{
+ pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+ /* Set the panic callback to turn AUX LED on or off. */
+ panic_blink = gta02_panic_blink;
+
+ s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+ INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
+#endif
+
+ s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c24xx_ts_set_platdata(>a02_ts_info);
+ s3c_ohci_set_platdata(>a02_usb_info);
+ s3c_nand_set_platdata(>a02_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+ pm_power_off = gta02_poweroff;
+
+ regulator_has_full_constraints();
+}
+
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+ /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+ .atag_offset = 0x100,
+ .map_io = gta02_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = gta02_machine_init,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ * and modifications by SBZ <sbz@spgui.org> and
+ * Weibing <http://weibing.blogbus.com> and
+ * Michel Pollet <buserror@gmail.com>
+ *
+ * For product information, visit http://code.google.com/p/mini2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/i2c/at24.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/irqs.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+#include "common.h"
+
+#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc mini2440_iodesc[] __initdata = {
+ /* nothing to declare, move along */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+
+static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* USB device UDC support */
+
+static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPC(5),
+};
+
+
+/* LCD timing and setup */
+
+/*
+ * This macro simplifies the table bellow
+ */
+#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
+ _yres,margin_top,margin_bottom,vsync, refresh) \
+ .width = _xres, \
+ .xres = _xres, \
+ .height = _yres, \
+ .yres = _yres, \
+ .left_margin = margin_left, \
+ .right_margin = margin_right, \
+ .upper_margin = margin_top, \
+ .lower_margin = margin_bottom, \
+ .hsync_len = hsync, \
+ .vsync_len = vsync, \
+ .pixclock = ((_clock*100000000000LL) / \
+ ((refresh) * \
+ (hsync + margin_left + _xres + margin_right) * \
+ (vsync + margin_top + _yres + margin_bottom))), \
+ .bpp = 16,\
+ .type = (S3C2410_LCDCON1_TFT16BPP |\
+ S3C2410_LCDCON1_TFT)
+
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+ [0] = { /* mini2440 + 3.5" TFT + touchscreen */
+ _LCD_DECLARE(
+ 7, /* The 3.5 is quite fast */
+ 240, 21, 38, 6, /* x timing */
+ 320, 4, 4, 2, /* y timing */
+ 60), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+ [1] = { /* mini2440 + 7" TFT + touchscreen */
+ _LCD_DECLARE(
+ 10, /* the 7" runs slower */
+ 800, 40, 40, 48, /* x timing */
+ 480, 29, 3, 3, /* y timing */
+ 50), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN),
+ },
+ /* The VGA shield can outout at several resolutions. All share
+ * the same timings, however, anything smaller than 1024x768
+ * will only be displayed in the top left corner of a 1024x768
+ * XGA output unless you add optional dip switches to the shield.
+ * Therefore timings for other resolutions have been omitted here.
+ */
+ [2] = {
+ _LCD_DECLARE(
+ 10,
+ 1024, 1, 2, 2, /* y timing */
+ 768, 200, 16, 16, /* x timing */
+ 24), /* refresh rate, maximum stable,
+ tested with the FPGA shield */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP),
+ },
+ /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
+ [3] = {
+ _LCD_DECLARE(
+ /* clock */
+ 7,
+ /* xres, margin_right, margin_left, hsync */
+ 320, 68, 66, 4,
+ /* yres, margin_top, margin_bottom, vsync */
+ 240, 4, 4, 9,
+ /* refresh rate */
+ 60),
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_HWSWP),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+ .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
+ .num_displays = 1,
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data. */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* MMC/SD */
+
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+/* NAND Flash on MINI2440 board */
+
+static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+ [0] = {
+ .name = "u-boot",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "u-boot-env",
+ .size = SZ_128K,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "kernel",
+ /* 5 megabytes, for a kernel with no modules
+ * or a uImage with a ramdisk attached */
+ .size = 0x00500000,
+ .offset = SZ_256K + SZ_128K,
+ },
+ [3] = {
+ .name = "root",
+ .offset = SZ_256K + SZ_128K + 0x00500000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
+ .partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
+ },
+};
+
+static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
+ .sets = mini2440_nand_sets,
+ .ignore_unset_ecc = 1,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini2440_dm9k_resource[] = {
+ [0] = {
+ .start = MACH_MINI2440_DM9K_BASE,
+ .end = MACH_MINI2440_DM9K_BASE + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MACH_MINI2440_DM9K_BASE + 4,
+ .end = MACH_MINI2440_DM9K_BASE + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+/*
+ * The DM9000 has no eeprom, and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini2440_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
+ .resource = mini2440_dm9k_resource,
+ .dev = {
+ .platform_data = &mini2440_dm9k_pdata,
+ },
+};
+
+/* CON5
+ * +--+ /-----\
+ * | | | |
+ * | | | BAT |
+ * | | \_____/
+ * | |
+ * | | +----+ +----+
+ * | | | K5 | | K1 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K4 | | K2 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K6 | | K3 |
+ * | | +----+ +----+
+ * .....
+ */
+static struct gpio_keys_button mini2440_buttons[] = {
+ {
+ .gpio = S3C2410_GPG(0), /* K1 */
+ .code = KEY_F1,
+ .desc = "Button 1",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(3), /* K2 */
+ .code = KEY_F2,
+ .desc = "Button 2",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(5), /* K3 */
+ .code = KEY_F3,
+ .desc = "Button 3",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(6), /* K4 */
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(7), /* K5 */
+ .code = KEY_F5,
+ .desc = "Button 5",
+ .active_low = 1,
+ },
+#if 0
+ /* this pin is also known as TCLK1 and seems to already
+ * marked as "in use" somehow in the kernel -- possibly wrongly */
+ {
+ .gpio = S3C2410_GPG(11), /* K6 */
+ .code = KEY_F6,
+ .desc = "Button 6",
+ .active_low = 1,
+ },
+#endif
+};
+
+static struct gpio_keys_platform_data mini2440_button_data = {
+ .buttons = mini2440_buttons,
+ .nbuttons = ARRAY_SIZE(mini2440_buttons),
+};
+
+static struct platform_device mini2440_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mini2440_button_data,
+ }
+};
+
+/* LEDS */
+
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
+ .name = "led1",
+ .gpio = S3C2410_GPB(5),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "heartbeat",
+};
+
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
+ .name = "led2",
+ .gpio = S3C2410_GPB(6),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
+ .name = "led3",
+ .gpio = S3C2410_GPB(7),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "mmc0",
+};
+
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
+ .name = "led4",
+ .gpio = S3C2410_GPB(8),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
+ .name = "backlight",
+ .gpio = S3C2410_GPG(4),
+ .def_trigger = "backlight",
+};
+
+static struct platform_device mini2440_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &mini2440_led1_pdata,
+ },
+};
+
+static struct platform_device mini2440_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &mini2440_led2_pdata,
+ },
+};
+
+static struct platform_device mini2440_led3 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &mini2440_led3_pdata,
+ },
+};
+
+static struct platform_device mini2440_led4 = {
+ .name = "s3c24xx_led",
+ .id = 4,
+ .dev = {
+ .platform_data = &mini2440_led4_pdata,
+ },
+};
+
+static struct platform_device mini2440_led_backlight = {
+ .name = "s3c24xx_led",
+ .id = 5,
+ .dev = {
+ .platform_data = &mini2440_led_backlight_pdata,
+ },
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device mini2440_audio = {
+ .name = "s3c24xx_uda134x",
+ .id = 0,
+ .dev = {
+ .platform_data = &mini2440_audio_pins,
+ },
+};
+
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c08 = {
+ .byte_len = SZ_8K / 8,
+ .page_size = 16,
+};
+
+static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .platform_data = &at24c08,
+ },
+};
+
+static struct platform_device uda1340_codec = {
+ .name = "uda134x-codec",
+ .id = -1,
+};
+
+static struct platform_device *mini2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &mini2440_device_eth,
+ &mini2440_led1,
+ &mini2440_led2,
+ &mini2440_led3,
+ &mini2440_led4,
+ &mini2440_button_device,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_iis,
+ &uda1340_codec,
+ &mini2440_audio,
+ &samsung_asoc_dma,
+};
+
+static void __init mini2440_map_io(void)
+{
+ s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+}
+
+/*
+ * mini2440_features string
+ *
+ * t = Touchscreen present
+ * b = backlight control
+ * c = camera [TODO]
+ * 0-9 LCD configuration
+ *
+ */
+static char mini2440_features_str[12] __initdata = "0tb";
+
+static int __init mini2440_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+ return 1;
+}
+
+__setup("mini2440=", mini2440_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+#define FEATURE_BACKLIGHT (1 << 1)
+#define FEATURE_TOUCH (1 << 2)
+#define FEATURE_CAMERA (1 << 3)
+
+struct mini2440_features_t {
+ int count;
+ int done;
+ int lcd_index;
+ struct platform_device *optional[8];
+};
+
+static void __init mini2440_parse_features(
+ struct mini2440_features_t * features,
+ const char * features_str )
+{
+ const char * fp = features_str;
+
+ features->count = 0;
+ features->done = 0;
+ features->lcd_index = -1;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
+ printk(KERN_INFO "MINI2440: "
+ "'%c' out of range LCD mode\n", f);
+ else {
+ features->optional[features->count++] =
+ &s3c_device_lcd;
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ case 'b':
+ if (features->done & FEATURE_BACKLIGHT)
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "backlight already set\n", f);
+ else {
+ features->optional[features->count++] =
+ &mini2440_led_backlight;
+ }
+ features->done |= FEATURE_BACKLIGHT;
+ break;
+ case 't':
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "touchscreen not compiled in\n", f);
+ break;
+ case 'c':
+ if (features->done & FEATURE_CAMERA)
+ printk(KERN_INFO "MINI2440: '%c' ignored, "
+ "camera already registered\n", f);
+ else
+ features->optional[features->count++] =
+ &s3c_device_camif;
+ features->done |= FEATURE_CAMERA;
+ break;
+ }
+ }
+}
+
+static void __init mini2440_init(void)
+{
+ struct mini2440_features_t features = { 0 };
+ int i;
+
+ printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ mini2440_features_str);
+
+ /* Parse the feature string */
+ mini2440_parse_features(&features, mini2440_features_str);
+
+ /* turn LCD on */
+ s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+
+ /* Turn the backlight early on */
+ WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+ gpio_direction_output(S3C2410_GPG(4), 1);
+
+ /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+ s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+
+ /* mark the key as input, without pullups (there is one on the board) */
+ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
+ s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+ }
+ if (features.lcd_index != -1) {
+ int li;
+
+ mini2440_fb_info.displays =
+ &mini2440_lcd_cfg[features.lcd_index];
+
+ printk(KERN_INFO "MINI2440: LCD");
+ for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
+ if (li == features.lcd_index)
+ printk(" [%d:%dx%d]", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ else
+ printk(" %d:%dx%d", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ printk("\n");
+ s3c24xx_fb_set_platdata(&mini2440_fb_info);
+ }
+
+ s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
+ s3c_nand_set_platdata(&mini2440_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, mini2440_i2c_devs,
+ ARRAY_SIZE(mini2440_i2c_devs));
+
+ platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
+
+ if (features.count) /* the optional features */
+ platform_add_devices(features.optional, features.count);
+
+}
+
+
+MACHINE_START(MINI2440, "MINI2440")
+ /* Maintainer: Michel Pollet <buserror@gmail.com> */
+ .atag_offset = 0x100,
+ .map_io = mini2440_map_io,
+ .init_machine = mini2440_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+ *
+ * Copyright (c) 2004 Nex Vision
+ * Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 15-10-2004 GG Created initial version
+ * 12-03-2005 BJD Updated for release
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "common.h"
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+ [0] = {
+ .start = S3C2410_CS0,
+ .end = S3C2410_CS0 + (8*1024*1024) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct map_info nexcoder_nor_map = {
+ .bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+ .name = "mtd-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
+ .resource = nexcoder_nor_resource,
+ .dev =
+ {
+ .platform_data = &nexcoder_nor_map,
+ }
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_camif,
+ &s3c_device_spi0,
+ &s3c_device_spi1,
+ &nexcoder_device_nor,
+};
+
+static void __init nexcoder_sensorboard_init(void)
+{
+ // Initialize SCCB bus
+ s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+ s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+ s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+
+ // Power up the sensor board
+ s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+ s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+}
+
+static void __init nexcoder_map_io(void)
+{
+ s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+
+ nexcoder_sensorboard_init();
+}
+
+static void __init nexcoder_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+ /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+ .atag_offset = 0x100,
+ .map_io = nexcoder_map_io,
+ .init_machine = nexcoder_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+ unsigned vregs1 = 0, vdcdc2 = 0;
+
+ if (!on) {
+ vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+ vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
+ }
+
+ dvs_en = on;
+ vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+ vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+ tps65010_config_vregs1(vregs1);
+ tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+ /* at the moment, we assume ARMCLK = HCLK => DVS */
+ return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *cf = data;
+ struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+ bool old_dvs = is_dvs(&freqs->old);
+ bool new_dvs = is_dvs(&freqs->new);
+ int ret = 0;
+
+ if (!dvs_en)
+ return 0;
+
+ printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+ freqs->old.armclk, freqs->old.hclk,
+ freqs->new.armclk, freqs->new.hclk);
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (old_dvs & !new_dvs ||
+ cur_dvs & !new_dvs) {
+ pr_debug("%s: exiting dvs\n", __func__);
+ cur_dvs = false;
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if (!old_dvs & new_dvs ||
+ !cur_dvs & new_dvs) {
+ pr_debug("entering dvs\n");
+ cur_dvs = true;
+ gpio_set_value(OSIRIS_GPIO_DVS, 0);
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+ .notifier_call = osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ dev_info(&pdev->dev, "initialising\n");
+
+ ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim gpio\n");
+ goto err_nogpio;
+ }
+
+ /* start with dvs disabled */
+ gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+ ret = cpufreq_register_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register with cpufreq\n");
+ goto err_nofreq;
+ }
+
+ osiris_dvs_tps_setdvs(true);
+
+ return 0;
+
+err_nofreq:
+ gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+ return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "exiting\n");
+
+ /* disable any current dvs */
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+
+ cpufreq_unregister_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ gpio_free(OSIRIS_GPIO_DVS);
+
+ return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+ cur_dvs = false;
+
+ return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+ osiris_dvs_tps_setdvs(true);
+ return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+ .suspend = osiris_dvs_suspend,
+ .resume = osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+ .probe = osiris_dvs_probe,
+ .remove = __devexit_p(osiris_dvs_remove),
+ .driver = {
+ .name = "osiris-dvs",
+ .owner = THIS_MODULE,
+ .pm = &osiris_dvs_pm,
+ },
+};
+
+static int __init osiris_dvs_init(void)
+{
+ return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+ platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
+ *
+ * Copyright (c) 2005-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "common.h"
+
+/* onboard perihperal map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL0,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_IDREG,
+ .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ }
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp &= ~OSIRIS_CTRL0_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+}
+
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = {
+ .start = 0x0f000000,
+ .end = 0x0f100000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0c000000,
+ .end = 0x0c100000,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Osiris power management device */
+
+#ifdef CONFIG_PM
+static unsigned char pm_osiris_ctrl0;
+
+static int osiris_pm_suspend(void)
+{
+ unsigned int tmp;
+
+ pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+
+ return 0;
+}
+
+static void osiris_pm_resume(void)
+{
+ if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
+ __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define osiris_pm_suspend NULL
+#define osiris_pm_resume NULL
+#endif
+
+static struct syscore_ops osiris_pm_syscore_ops = {
+ .suspend = osiris_pm_suspend,
+ .resume = osiris_pm_resume,
+};
+
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+ /* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+ .name = "osiris-dvs",
+ .id = -1,
+ .dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+ osiris_tps_device.dev.parent = &client->dev;
+ return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+ platform_device_unregister(&osiris_tps_device);
+ return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+ .base = -1, /* GPIO can go anywhere at the moment */
+ .setup = osiris_tps_setup,
+ .teardown = osiris_tps_remove,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ .platform_data = &osiris_tps_board,
+ },
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_wdt,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] __initdata = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = &clk_upll;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = &clk_upll;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+ printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+ __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+ osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+ osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+ } else {
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ }
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+}
+
+static void __init osiris_init(void)
+{
+ register_syscore_ops(&osiris_pm_syscore_ops);
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&osiris_nand_info);
+
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
+ i2c_register_board_info(0, osiris_i2c_devs,
+ ARRAY_SIZE(osiris_i2c_devs));
+
+ platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = osiris_init,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/device.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#include <sound/uda1380.h>
+
+#include "common.h"
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0xf1,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+};
+
+static struct s3c2410fb_display rx1950_display = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .pixclock = 260000,
+ .left_margin = 10,
+ .right_margin = 20,
+ .hsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_HWSWP |
+ (0x02 << 13) |
+ (0x02 << 15),
+
+};
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+ return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+ "main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = rx1950_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = rx1950_supplicants,
+ .num_supplicants = ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
+ IORESOURCE_IRQ_HIGHEDGE,
+ .start = IRQ_EINT2,
+ .end = IRQ_EINT2,
+ },
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data =
+ &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+ { .volt = 4100, .cur = 156, .level = 100},
+ { .volt = 4050, .cur = 156, .level = 95},
+ { .volt = 4025, .cur = 141, .level = 90},
+ { .volt = 3995, .cur = 144, .level = 85},
+ { .volt = 3957, .cur = 162, .level = 80},
+ { .volt = 3931, .cur = 147, .level = 75},
+ { .volt = 3902, .cur = 147, .level = 70},
+ { .volt = 3863, .cur = 153, .level = 65},
+ { .volt = 3838, .cur = 150, .level = 60},
+ { .volt = 3800, .cur = 153, .level = 55},
+ { .volt = 3765, .cur = 153, .level = 50},
+ { .volt = 3748, .cur = 172, .level = 45},
+ { .volt = 3740, .cur = 153, .level = 40},
+ { .volt = 3714, .cur = 175, .level = 35},
+ { .volt = 3710, .cur = 156, .level = 30},
+ { .volt = 3963, .cur = 156, .level = 25},
+ { .volt = 3672, .cur = 178, .level = 20},
+ { .volt = 3651, .cur = 178, .level = 15},
+ { .volt = 3629, .cur = 178, .level = 10},
+ { .volt = 3612, .cur = 162, .level = 5},
+ { .volt = 3605, .cur = 162, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+ { .volt = 4200, .cur = 0, .level = 100},
+ { .volt = 4190, .cur = 0, .level = 99},
+ { .volt = 4178, .cur = 0, .level = 95},
+ { .volt = 4110, .cur = 0, .level = 70},
+ { .volt = 4076, .cur = 0, .level = 65},
+ { .volt = 4046, .cur = 0, .level = 60},
+ { .volt = 4021, .cur = 0, .level = 55},
+ { .volt = 3999, .cur = 0, .level = 50},
+ { .volt = 3982, .cur = 0, .level = 45},
+ { .volt = 3965, .cur = 0, .level = 40},
+ { .volt = 3957, .cur = 0, .level = 35},
+ { .volt = 3948, .cur = 0, .level = 30},
+ { .volt = 3936, .cur = 0, .level = 25},
+ { .volt = 3927, .cur = 0, .level = 20},
+ { .volt = 3906, .cur = 0, .level = 15},
+ { .volt = 3880, .cur = 0, .level = 10},
+ { .volt = 3829, .cur = 0, .level = 5},
+ { .volt = 3820, .cur = 0, .level = 0},
+};
+
+int rx1950_bat_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+ if (ret)
+ goto err_gpio1;
+ ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+ if (ret)
+ goto err_gpio2;
+
+ return 0;
+
+err_gpio2:
+ gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+ return ret;
+}
+
+void rx1950_bat_exit(void)
+{
+ gpio_free(S3C2410_GPJ(2));
+ gpio_free(S3C2410_GPJ(3));
+}
+
+void rx1950_enable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 1);
+ gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+void rx1950_disable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 0);
+ gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+DEFINE_SPINLOCK(rx1950_blink_spin);
+
+static int rx1950_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ int blink_gpio, check_gpio;
+
+ switch (gpio) {
+ case S3C2410_GPA(6):
+ blink_gpio = S3C2410_GPA(4);
+ check_gpio = S3C2410_GPA(3);
+ break;
+ case S3C2410_GPA(7):
+ blink_gpio = S3C2410_GPA(3);
+ check_gpio = S3C2410_GPA(4);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ spin_lock(&rx1950_blink_spin);
+
+ switch (state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ if (!gpio_get_value(check_gpio))
+ gpio_set_value(S3C2410_GPJ(6), 0);
+ gpio_set_value(blink_gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ gpio_set_value(gpio, 0);
+ gpio_set_value(S3C2410_GPJ(6), 1);
+ gpio_set_value(blink_gpio, 1);
+ break;
+ }
+
+ spin_unlock(&rx1950_blink_spin);
+
+ return 0;
+}
+
+static struct gpio_led rx1950_leds_desc[] = {
+ {
+ .name = "Green",
+ .default_trigger = "main-battery-full",
+ .gpio = S3C2410_GPA(6),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Red",
+ .default_trigger
+ = "main-battery-charging-blink-full-solid",
+ .gpio = S3C2410_GPA(7),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Blue",
+ .default_trigger = "rx1950-acx-mem",
+ .gpio = S3C2410_GPA(11),
+ .retain_state_suspended = 1,
+ },
+};
+
+static struct gpio_led_platform_data rx1950_leds_pdata = {
+ .num_leds = ARRAY_SIZE(rx1950_leds_desc),
+ .leds = rx1950_leds_desc,
+ .gpio_blink_set = rx1950_led_blink_set,
+};
+
+static struct platform_device rx1950_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rx1950_leds_pdata,
+ },
+};
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+ .init = rx1950_bat_init,
+ .exit = rx1950_bat_exit,
+ .enable_charger = rx1950_enable_charger,
+ .disable_charger = rx1950_disable_charger,
+ .gpio_charge_finished = S3C2410_GPF(3),
+ .lut_noac = bat_lut_noac,
+ .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+ .lut_acin = bat_lut_acin,
+ .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+ .volt_channel = 0,
+ .current_channel = 1,
+ .volt_mult = 4235,
+ .current_mult = 2900,
+ .internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+ .name = "s3c-adc-battery",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_adc.dev,
+ .platform_data = &rx1950_bat_cfg,
+ },
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+ .displays = &rx1950_display,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa9556a9,
+ .gpccon_mask = 0xffc003fc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa90aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000fcfd,
+ .gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+void rx1950_lcd_power(int enable)
+{
+ int i;
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+
+ /* GPC11-GPC15->OUTPUT */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 1);
+
+ /* Wait a bit here... */
+ mdelay(100);
+
+ /* GPD2-GPD7->OUTPUT */
+ /* GPD11-GPD15->OUTPUT */
+ /* GPD2-GPD7->1, GPD11-GPD15->1 */
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+
+ /* Wait a bit here...*/
+ mdelay(100);
+
+ /* GPB0->OUTPUT, GPB0->0 */
+ gpio_direction_output(S3C2410_GPB(0), 0);
+
+ /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+ for (i = 1; i < 5; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPC15-GPC11->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPD15-GPD11->0, GPD2->GPD7->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ /* GPC6->0, GPC7->0, GPC5->0 */
+ gpio_direction_output(S3C2410_GPC(6), 0);
+ gpio_direction_output(S3C2410_GPC(7), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+
+ /* GPB1->OUTPUT, GPB1->0 */
+ gpio_direction_output(S3C2410_GPB(1), 0);
+ pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+ pwm_disable(lcd_pwm);
+
+ /* GPC0->0, GPC10->0 */
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(10), 0);
+ } else {
+ pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+ pwm_enable(lcd_pwm);
+
+ gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_direction_output(S3C2410_GPC(5), 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+ gpio_direction_output(S3C2410_GPC(7), 1);
+
+ for (i = 1; i < 5; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 2; i < 8; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ gpio_direction_output(S3C2410_GPC(10), 1);
+ gpio_direction_output(S3C2410_GPC(6), 1);
+ }
+ enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ } else {
+ /* LED driver need a "push" to power on */
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ /* Warm up backlight for one period of PWM.
+ * Without this trick its almost impossible to
+ * enable backlight with low brightness value
+ */
+ ndelay(48000);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ }
+ enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+ WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+ lcd_pwm = pwm_request(1, "RX1950 LCD");
+ if (IS_ERR(lcd_pwm)) {
+ dev_err(dev, "Unable to request PWM for LCD power!\n");
+ return PTR_ERR(lcd_pwm);
+ }
+
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+
+ return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+
+ pwm_free(lcd_pwm);
+ gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+ } else {
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+ }
+ return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 24,
+ .dft_brightness = 4,
+ .pwm_period_ns = 48000,
+ .init = rx1950_backlight_init,
+ .notify = rx1950_backlight_notify,
+ .exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &rx1950_backlight_data,
+ },
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_direction_output(S3C2410_GPJ(1), 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPF(5),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = rx1950_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+ [0] = {
+ .name = "Boot0",
+ .offset = 0,
+ .size = 0x4000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x300000,
+ .mask_flags = 0,
+ },
+ [3] = {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+ .partitions = rx1950_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+ .sets = rx1950_nand_sets,
+};
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+ .pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S3C2410_GPF(0),
+ .active_low = 1,
+ .desc = "Power button",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_F5,
+ .gpio = S3C2410_GPF(7),
+ .active_low = 1,
+ .desc = "Record button",
+ },
+ {
+ .code = KEY_F1,
+ .gpio = S3C2410_GPG(0),
+ .active_low = 1,
+ .desc = "Calendar button",
+ },
+ {
+ .code = KEY_F2,
+ .gpio = S3C2410_GPG(2),
+ .active_low = 1,
+ .desc = "Contacts button",
+ },
+ {
+ .code = KEY_F3,
+ .gpio = S3C2410_GPG(3),
+ .active_low = 1,
+ .desc = "Mail button",
+ },
+ {
+ .code = KEY_F4,
+ .gpio = S3C2410_GPG(7),
+ .active_low = 1,
+ .desc = "WLAN button",
+ },
+ {
+ .code = KEY_LEFT,
+ .gpio = S3C2410_GPG(10),
+ .active_low = 1,
+ .desc = "Left button",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = S3C2410_GPG(11),
+ .active_low = 1,
+ .desc = "Right button",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = S3C2410_GPG(4),
+ .active_low = 1,
+ .desc = "Up button",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = S3C2410_GPG(6),
+ .active_low = 1,
+ .desc = "Down button",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = S3C2410_GPG(9),
+ .active_low = 1,
+ .desc = "Ok button"
+ },
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+ .buttons = rx1950_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = S3C2410_GPJ(0),
+ .gpio_reset = S3C2410_GPD(0),
+ .dac_clk = UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info rx1950_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x1a),
+ .platform_data = &uda1380_info,
+ },
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &samsung_asoc_dma,
+ &s3c_device_usbgadget,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c_device_timer[1],
+ &rx1950_backlight,
+ &rx1950_device_gpiokeys,
+ &power_supply,
+ &rx1950_battery,
+ &rx1950_leds,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+ s3c24xx_clkout0.parent = &clk_h;
+ s3c24xx_clkout1.parent = &clk_f;
+
+ s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+ s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+ s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+ int i;
+
+ s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+ s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+ s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&rx1950_nand_info);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ /* mmc power is disabled by default */
+ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+
+ for (i = 0; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 10; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 2; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ for (i = 11; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
+ WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
+ WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
+ gpio_direction_output(S3C2410_GPA(3), 0);
+ gpio_direction_output(S3C2410_GPA(4), 0);
+ gpio_direction_output(S3C2410_GPJ(6), 0);
+
+ platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+
+ i2c_register_board_info(0, rx1950_i2c_devices,
+ ARRAY_SIZE(rx1950_i2c_devices));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+ /* Maintainers: Vasily Khoruzhick */
+ .atag_offset = 0x100,
+ .map_io = rx1950_map_io,
+ .reserve = rx1950_reserve,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = rx1950_init_machine,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.handhelds.org/projects/rx3715.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/h1940.h>
+#include <plat/nand.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "common.h"
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+ /* dump ISA space somewhere unused */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x00,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ }
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 36,
+ .right_margin = 36,
+ .hsync_len = 8,
+ .upper_margin = 6,
+ .lower_margin = 7,
+ .vsync_len = 3,
+};
+
+static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
+
+ .displays = &rx3715_lcdcfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0xf82,
+
+ .gpccon = 0xaa955699,
+ .gpccon_mask = 0xffc003cc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa95aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+};
+
+static struct mtd_partition __initdata rx3715_nand_part[] = {
+ [0] = {
+ .name = "Whole Flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
+ .partitions = rx3715_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
+ .sets = rx3715_nand_sets,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_nand,
+};
+
+static void __init rx3715_map_io(void)
+{
+ s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init rx3715_init_irq(void)
+{
+ s3c24xx_init_irq();
+}
+
+static void __init rx3715_init_machine(void)
+{
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+ s3c_pm_init();
+
+ s3c_nand_set_platdata(&rx3715_nand_info);
+ s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
+}
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .map_io = rx3715_map_io,
+ .reserve = rx3715_reserve,
+ .init_irq = rx3715_init_irq,
+ .init_machine = rx3715_init_machine,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/fb.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/common-smdk.h>
+
+#include "common.h"
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 4,
+};
+
+static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
+ .displays = &smdk2440_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+};
+
+static void __init smdk2440_map_io(void)
+{
+ s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+}
+
+static void __init smdk2440_machine_init(void)
+{
+ s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2440_map_io,
+ .init_machine = smdk2440_machine_init,
+ .timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct device s3c2440_dev = {
+ .bus = &s3c2440_subsys,
+};
+
+int __init s3c2440_init(void)
+{
+ printk("S3C2440: Initialising architecture\n");
+
+ /* change irq for watchdog */
+
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
+ /* register suspend/resume handlers */
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ /* register our system device for everything else */
+
+ return device_register(&s3c2440_dev);
+}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+}
+
+void s3c2440_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2442 core and lock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ div = parent_rate / rate;
+
+ if (div == 3)
+ return parent_rate / 3;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div /= 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2442_camif_upll_round(clk, rate);
+
+ camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+ if (rate == parent_rate) {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+ } else if ((parent_rate / rate) == 3) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+ } else {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+ .name = "camif",
+ .id = -1,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+ },
+};
+
+static int s3c2442_clk_add(struct device *dev)
+{
+ struct clk *clock_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ s3c2442_clk_cam.parent = clock_h;
+ s3c2442_clk_cam_upll.parent = clock_upll;
+
+ s3c24xx_register_clock(&s3c2442_clk_cam);
+ s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+ clk_disable(&s3c2442_clk_cam);
+
+ return 0;
+}
+
+static struct subsys_interface s3c2442_clk_interface = {
+ .name = "s3c2442_clk",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+ return subsys_interface_register(&s3c2442_clk_interface);
+}
+
+arch_initcall(s3c2442_clk_init);
+
+
+static struct device s3c2442_dev = {
+ .bus = &s3c2442_subsys,
+};
+
+int __init s3c2442_init(void)
+{
+ printk("S3C2442: Initialising architecture\n");
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ return device_register(&s3c2442_dev);
+}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
+}
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/nand-core.h>
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+ /* register our io-tables */
+
+ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+ /* rename any peripherals used differing from the s3c2410 */
+
+ s3c_device_sdi.name = "s3c2440-sdi";
+ s3c_device_i2c0.name = "s3c2440-i2c";
+ s3c_nand_setname("s3c2440-nand");
+ s3c_device_ts.name = "s3c2440-ts";
+ s3c_device_usbgadget.name = "s3c2440-usbgadget";
+}
+
+void __init_or_cpufreq s3c244x_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long clkdiv;
+ unsigned long camdiv;
+ unsigned long xtal;
+ unsigned long hclk, fclk, pclk;
+ int hdiv = 1;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ /* work out clock scalings */
+
+ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+ case S3C2440_CLKDIVN_HDIVN_1:
+ hdiv = 1;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_2:
+ hdiv = 2;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_4_8:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_3_6:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+ break;
+ }
+
+ hclk = fclk / hdiv;
+ pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brief summary of clocks, etc */
+
+ printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+ /* initialise the clocks here, to allow other things like the
+ * console to use them, and to add new ones after the initialisation
+ */
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c244x_setup_clocks();
+ s3c2410_baseclk_add();
+}
+
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
+
+struct bus_type s3c2440_subsys = {
+ .name = "s3c2440-core",
+ .dev_name = "s3c2440-core",
+};
+
+struct bus_type s3c2442_subsys = {
+ .name = "s3c2442-core",
+ .dev_name = "s3c2442-core",
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+ return subsys_system_register(&s3c2440_subsys, NULL);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+ return subsys_system_register(&s3c2442_subsys, NULL);
+}
+
+core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff