obj-n :=
obj- :=
-# Core support for S5PC100 system
+# Core
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o
-obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
-obj-$(CONFIG_CPU_S5PC100) += dma.o
+obj-y += common.o clock.o
-# Helper and device support
-
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# device support
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += dma.o
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
# device support
+
obj-y += dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+
+obj-y += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5pc100.h>
+
+#include "common.h"
static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
--- /dev/null
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Common Codes for S5PC100
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/adc-core.h>
+#include <plat/ata-core.h>
+#include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC100_VA_OTHERS,
+ .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5pc100_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/*
+ * s5pc100_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pc100_map_io(void)
+{
+ /* initialise device information early */
+ s5pc100_default_sdhci0();
+ s5pc100_default_sdhci1();
+ s5pc100_default_sdhci2();
+
+ s3c_adc_setname("s3c64xx-adc");
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_onenand_setname("s5pc100-onenand");
+ s3c_fb_setname("s5pc100-fb");
+ s3c_cfcon_setname("s5pc100-pata");
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pc100_register_clocks();
+ s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+ u32 vic[] = {~0, ~0, ~0};
+
+ /* VIC0, VIC1, and VIC2 are fully populated. */
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pc100_sysclass = {
+ .name = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+ .cls = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+ return sysdev_class_register(&s5pc100_sysclass);
+}
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+ printk(KERN_INFO "S5PC100: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5pc100_idle;
+
+ return sysdev_register(&s5pc100_sysdev);
+}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5pc100/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6410/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/ata-core.h>
-#include <plat/iic-core.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/onenand-core.h>
-#include <plat/fb-core.h>
-
-#include <plat/s5pc100.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC100_VA_OTHERS,
- .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }
-};
-
-static void s5pc100_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-/* s5pc100_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s5pc100_map_io(void)
-{
- iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
-
- /* initialise device information early */
- s5pc100_default_sdhci0();
- s5pc100_default_sdhci1();
- s5pc100_default_sdhci2();
-
- s3c_adc_setname("s3c64xx-adc");
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_onenand_setname("s5pc100-onenand");
- s3c_fb_setname("s5pc100-fb");
- s3c_cfcon_setname("s5pc100-pata");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5pc100_register_clocks();
- s5pc100_setup_clocks();
-}
-
-void __init s5pc100_init_irq(void)
-{
- u32 vic[] = {~0, ~0, ~0};
-
- /* VIC0, VIC1, and VIC2 are fully populated. */
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct sysdev_class s5pc100_sysclass = {
- .name = "s5pc100-core",
-};
-
-static struct sys_device s5pc100_sysdev = {
- .cls = &s5pc100_sysclass,
-};
-
-static int __init s5pc100_core_init(void)
-{
- return sysdev_class_register(&s5pc100_sysclass);
-}
-
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
- printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pc100_idle;
-
- return sysdev_register(&s5pc100_sysdev);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/ata.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init smdkc100_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
#include <mach/regs-clock.h>
#include <plat/cpu.h>
-#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
#include <plat/exynos4.h>
/* table of supported CPUs */
-static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- }, {
.idcode = S5PV210_CPU_ID,
.idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff