00-INDEX
- this file (info on some of the filesystems supported by linux).
-Exporting
- - explanation of how to make filesystems exportable.
Locking
- info on locking rules as they pertain to Linux VFS.
9p.txt
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
-nfs41-server.txt
- - info on the Linux server implementation of NFSv4 minor version 1.
-nfs-rdma.txt
- - how to install and setup the Linux NFS/RDMA client and server software.
-nfsroot.txt
- - short guide on setting up a diskless box with NFS root filesystem.
+nfs/
+ - nfs-related documentation.
nilfs2.txt
- info and mount options for the NILFS2 filesystem.
ntfs.txt
+++ /dev/null
-
-Making Filesystems Exportable
-=============================
-
-Overview
---------
-
-All filesystem operations require a dentry (or two) as a starting
-point. Local applications have a reference-counted hold on suitable
-dentries via open file descriptors or cwd/root. However remote
-applications that access a filesystem via a remote filesystem protocol
-such as NFS may not be able to hold such a reference, and so need a
-different way to refer to a particular dentry. As the alternative
-form of reference needs to be stable across renames, truncates, and
-server-reboot (among other things, though these tend to be the most
-problematic), there is no simple answer like 'filename'.
-
-The mechanism discussed here allows each filesystem implementation to
-specify how to generate an opaque (outside of the filesystem) byte
-string for any dentry, and how to find an appropriate dentry for any
-given opaque byte string.
-This byte string will be called a "filehandle fragment" as it
-corresponds to part of an NFS filehandle.
-
-A filesystem which supports the mapping between filehandle fragments
-and dentries will be termed "exportable".
-
-
-
-Dcache Issues
--------------
-
-The dcache normally contains a proper prefix of any given filesystem
-tree. This means that if any filesystem object is in the dcache, then
-all of the ancestors of that filesystem object are also in the dcache.
-As normal access is by filename this prefix is created naturally and
-maintained easily (by each object maintaining a reference count on
-its parent).
-
-However when objects are included into the dcache by interpreting a
-filehandle fragment, there is no automatic creation of a path prefix
-for the object. This leads to two related but distinct features of
-the dcache that are not needed for normal filesystem access.
-
-1/ The dcache must sometimes contain objects that are not part of the
- proper prefix. i.e that are not connected to the root.
-2/ The dcache must be prepared for a newly found (via ->lookup) directory
- to already have a (non-connected) dentry, and must be able to move
- that dentry into place (based on the parent and name in the
- ->lookup). This is particularly needed for directories as
- it is a dcache invariant that directories only have one dentry.
-
-To implement these features, the dcache has:
-
-a/ A dentry flag DCACHE_DISCONNECTED which is set on
- any dentry that might not be part of the proper prefix.
- This is set when anonymous dentries are created, and cleared when a
- dentry is noticed to be a child of a dentry which is in the proper
- prefix.
-
-b/ A per-superblock list "s_anon" of dentries which are the roots of
- subtrees that are not in the proper prefix. These dentries, as
- well as the proper prefix, need to be released at unmount time. As
- these dentries will not be hashed, they are linked together on the
- d_hash list_head.
-
-c/ Helper routines to allocate anonymous dentries, and to help attach
- loose directory dentries at lookup time. They are:
- d_alloc_anon(inode) will return a dentry for the given inode.
- If the inode already has a dentry, one of those is returned.
- If it doesn't, a new anonymous (IS_ROOT and
- DCACHE_DISCONNECTED) dentry is allocated and attached.
- In the case of a directory, care is taken that only one dentry
- can ever be attached.
- d_splice_alias(inode, dentry) will make sure that there is a
- dentry with the same name and parent as the given dentry, and
- which refers to the given inode.
- If the inode is a directory and already has a dentry, then that
- dentry is d_moved over the given dentry.
- If the passed dentry gets attached, care is taken that this is
- mutually exclusive to a d_alloc_anon operation.
- If the passed dentry is used, NULL is returned, else the used
- dentry is returned. This corresponds to the calling pattern of
- ->lookup.
-
-
-Filesystem Issues
------------------
-
-For a filesystem to be exportable it must:
-
- 1/ provide the filehandle fragment routines described below.
- 2/ make sure that d_splice_alias is used rather than d_add
- when ->lookup finds an inode for a given parent and name.
- Typically the ->lookup routine will end with a:
-
- return d_splice_alias(inode, dentry);
- }
-
-
-
- A file system implementation declares that instances of the filesystem
-are exportable by setting the s_export_op field in the struct
-super_block. This field must point to a "struct export_operations"
-struct which has the following members:
-
- encode_fh (optional)
- Takes a dentry and creates a filehandle fragment which can later be used
- to find or create a dentry for the same object. The default
- implementation creates a filehandle fragment that encodes a 32bit inode
- and generation number for the inode encoded, and if necessary the
- same information for the parent.
-
- fh_to_dentry (mandatory)
- Given a filehandle fragment, this should find the implied object and
- create a dentry for it (possibly with d_alloc_anon).
-
- fh_to_parent (optional but strongly recommended)
- Given a filehandle fragment, this should find the parent of the
- implied object and create a dentry for it (possibly with d_alloc_anon).
- May fail if the filehandle fragment is too small.
-
- get_parent (optional but strongly recommended)
- When given a dentry for a directory, this should return a dentry for
- the parent. Quite possibly the parent dentry will have been allocated
- by d_alloc_anon. The default get_parent function just returns an error
- so any filehandle lookup that requires finding a parent will fail.
- ->lookup("..") is *not* used as a default as it can leave ".." entries
- in the dcache which are too messy to work with.
-
- get_name (optional)
- When given a parent dentry and a child dentry, this should find a name
- in the directory identified by the parent dentry, which leads to the
- object identified by the child dentry. If no get_name function is
- supplied, a default implementation is provided which uses vfs_readdir
- to find potential names, and matches inode numbers to find the correct
- match.
-
-
-A filehandle fragment consists of an array of 1 or more 4byte words,
-together with a one byte "type".
-The decode_fh routine should not depend on the stated size that is
-passed to it. This size may be larger than the original filehandle
-generated by encode_fh, in which case it will have been padded with
-nuls. Rather, the encode_fh routine should choose a "type" which
-indicates the decode_fh how much of the filehandle is valid, and how
-it should be interpreted.
+++ /dev/null
-################################################################################
-# #
-# NFS/RDMA README #
-# #
-################################################################################
-
- Author: NetApp and Open Grid Computing
- Date: May 29, 2008
-
-Table of Contents
-~~~~~~~~~~~~~~~~~
- - Overview
- - Getting Help
- - Installation
- - Check RDMA and NFS Setup
- - NFS/RDMA Setup
-
-Overview
-~~~~~~~~
-
- This document describes how to install and setup the Linux NFS/RDMA client
- and server software.
-
- The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server
- was first included in the following release, Linux 2.6.25.
-
- In our testing, we have obtained excellent performance results (full 10Gbit
- wire bandwidth at minimal client CPU) under many workloads. The code passes
- the full Connectathon test suite and operates over both Infiniband and iWARP
- RDMA adapters.
-
-Getting Help
-~~~~~~~~~~~~
-
- If you get stuck, you can ask questions on the
-
- nfs-rdma-devel@lists.sourceforge.net
-
- mailing list.
-
-Installation
-~~~~~~~~~~~~
-
- These instructions are a step by step guide to building a machine for
- use with NFS/RDMA.
-
- - Install an RDMA device
-
- Any device supported by the drivers in drivers/infiniband/hw is acceptable.
-
- Testing has been performed using several Mellanox-based IB cards, the
- Ammasso AMS1100 iWARP adapter, and the Chelsio cxgb3 iWARP adapter.
-
- - Install a Linux distribution and tools
-
- The first kernel release to contain both the NFS/RDMA client and server was
- Linux 2.6.25 Therefore, a distribution compatible with this and subsequent
- Linux kernel release should be installed.
-
- The procedures described in this document have been tested with
- distributions from Red Hat's Fedora Project (http://fedora.redhat.com/).
-
- - Install nfs-utils-1.1.2 or greater on the client
-
- An NFS/RDMA mount point can be obtained by using the mount.nfs command in
- nfs-utils-1.1.2 or greater (nfs-utils-1.1.1 was the first nfs-utils
- version with support for NFS/RDMA mounts, but for various reasons we
- recommend using nfs-utils-1.1.2 or greater). To see which version of
- mount.nfs you are using, type:
-
- $ /sbin/mount.nfs -V
-
- If the version is less than 1.1.2 or the command does not exist,
- you should install the latest version of nfs-utils.
-
- Download the latest package from:
-
- http://www.kernel.org/pub/linux/utils/nfs
-
- Uncompress the package and follow the installation instructions.
-
- If you will not need the idmapper and gssd executables (you do not need
- these to create an NFS/RDMA enabled mount command), the installation
- process can be simplified by disabling these features when running
- configure:
-
- $ ./configure --disable-gss --disable-nfsv4
-
- To build nfs-utils you will need the tcp_wrappers package installed. For
- more information on this see the package's README and INSTALL files.
-
- After building the nfs-utils package, there will be a mount.nfs binary in
- the utils/mount directory. This binary can be used to initiate NFS v2, v3,
- or v4 mounts. To initiate a v4 mount, the binary must be called
- mount.nfs4. The standard technique is to create a symlink called
- mount.nfs4 to mount.nfs.
-
- This mount.nfs binary should be installed at /sbin/mount.nfs as follows:
-
- $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
-
- In this location, mount.nfs will be invoked automatically for NFS mounts
- by the system mount command.
-
- NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
- on the NFS client machine. You do not need this specific version of
- nfs-utils on the server. Furthermore, only the mount.nfs command from
- nfs-utils-1.1.2 is needed on the client.
-
- - Install a Linux kernel with NFS/RDMA
-
- The NFS/RDMA client and server are both included in the mainline Linux
- kernel version 2.6.25 and later. This and other versions of the 2.6 Linux
- kernel can be found at:
-
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/
-
- Download the sources and place them in an appropriate location.
-
- - Configure the RDMA stack
-
- Make sure your kernel configuration has RDMA support enabled. Under
- Device Drivers -> InfiniBand support, update the kernel configuration
- to enable InfiniBand support [NOTE: the option name is misleading. Enabling
- InfiniBand support is required for all RDMA devices (IB, iWARP, etc.)].
-
- Enable the appropriate IB HCA support (mlx4, mthca, ehca, ipath, etc.) or
- iWARP adapter support (amso, cxgb3, etc.).
-
- If you are using InfiniBand, be sure to enable IP-over-InfiniBand support.
-
- - Configure the NFS client and server
-
- Your kernel configuration must also have NFS file system support and/or
- NFS server support enabled. These and other NFS related configuration
- options can be found under File Systems -> Network File Systems.
-
- - Build, install, reboot
-
- The NFS/RDMA code will be enabled automatically if NFS and RDMA
- are turned on. The NFS/RDMA client and server are configured via the hidden
- SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
- value of SUNRPC_XPRT_RDMA will be:
-
- - N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
- and server will not be built
- - M if both SUNRPC and INFINIBAND are on (M or Y) and at least one is M,
- in this case the NFS/RDMA client and server will be built as modules
- - Y if both SUNRPC and INFINIBAND are Y, in this case the NFS/RDMA client
- and server will be built into the kernel
-
- Therefore, if you have followed the steps above and turned no NFS and RDMA,
- the NFS/RDMA client and server will be built.
-
- Build a new kernel, install it, boot it.
-
-Check RDMA and NFS Setup
-~~~~~~~~~~~~~~~~~~~~~~~~
-
- Before configuring the NFS/RDMA software, it is a good idea to test
- your new kernel to ensure that the kernel is working correctly.
- In particular, it is a good idea to verify that the RDMA stack
- is functioning as expected and standard NFS over TCP/IP and/or UDP/IP
- is working properly.
-
- - Check RDMA Setup
-
- If you built the RDMA components as modules, load them at
- this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel
- card:
-
- $ modprobe ib_mthca
- $ modprobe ib_ipoib
-
- If you are using InfiniBand, make sure there is a Subnet Manager (SM)
- running on the network. If your IB switch has an embedded SM, you can
- use it. Otherwise, you will need to run an SM, such as OpenSM, on one
- of your end nodes.
-
- If an SM is running on your network, you should see the following:
-
- $ cat /sys/class/infiniband/driverX/ports/1/state
- 4: ACTIVE
-
- where driverX is mthca0, ipath5, ehca3, etc.
-
- To further test the InfiniBand software stack, use IPoIB (this
- assumes you have two IB hosts named host1 and host2):
-
- host1$ ifconfig ib0 a.b.c.x
- host2$ ifconfig ib0 a.b.c.y
- host1$ ping a.b.c.y
- host2$ ping a.b.c.x
-
- For other device types, follow the appropriate procedures.
-
- - Check NFS Setup
-
- For the NFS components enabled above (client and/or server),
- test their functionality over standard Ethernet using TCP/IP or UDP/IP.
-
-NFS/RDMA Setup
-~~~~~~~~~~~~~~
-
- We recommend that you use two machines, one to act as the client and
- one to act as the server.
-
- One time configuration:
-
- - On the server system, configure the /etc/exports file and
- start the NFS/RDMA server.
-
- Exports entries with the following formats have been tested:
-
- /vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash)
- /vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash)
-
- The IP address(es) is(are) the client's IPoIB address for an InfiniBand
- HCA or the cleint's iWARP address(es) for an RNIC.
-
- NOTE: The "insecure" option must be used because the NFS/RDMA client does
- not use a reserved port.
-
- Each time a machine boots:
-
- - Load and configure the RDMA drivers
-
- For InfiniBand using a Mellanox adapter:
-
- $ modprobe ib_mthca
- $ modprobe ib_ipoib
- $ ifconfig ib0 a.b.c.d
-
- NOTE: use unique addresses for the client and server
-
- - Start the NFS server
-
- If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA transport module:
-
- $ modprobe svcrdma
-
- Regardless of how the server was built (module or built-in), start the
- server:
-
- $ /etc/init.d/nfs start
-
- or
-
- $ service nfs start
-
- Instruct the server to listen on the RDMA transport:
-
- $ echo rdma 20049 > /proc/fs/nfsd/portlist
-
- - On the client system
-
- If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA client module:
-
- $ modprobe xprtrdma.ko
-
- Regardless of how the client was built (module or built-in), use this
- command to mount the NFS/RDMA server:
-
- $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
-
- To verify that the mount is using RDMA, run "cat /proc/mounts" and check
- the "proto" field for the given mount.
-
- Congratulations! You're using NFS/RDMA!
+++ /dev/null
-
-The NFS client
-==============
-
-The NFS version 2 protocol was first documented in RFC1094 (March 1989).
-Since then two more major releases of NFS have been published, with NFSv3
-being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
-2003).
-
-The Linux NFS client currently supports all the above published versions,
-and work is in progress on adding support for minor version 1 of the NFSv4
-protocol.
-
-The purpose of this document is to provide information on some of the
-upcall interfaces that are used in order to provide the NFS client with
-some of the information that it requires in order to fully comply with
-the NFS spec.
-
-The DNS resolver
-================
-
-NFSv4 allows for one server to refer the NFS client to data that has been
-migrated onto another server by means of the special "fs_locations"
-attribute. See
- http://tools.ietf.org/html/rfc3530#section-6
-and
- http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
-
-The fs_locations information can take the form of either an ip address and
-a path, or a DNS hostname and a path. The latter requires the NFS client to
-do a DNS lookup in order to mount the new volume, and hence the need for an
-upcall to allow userland to provide this service.
-
-Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
-/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
-
- (1) The process checks the dns_resolve cache to see if it contains a
- valid entry. If so, it returns that entry and exits.
-
- (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
- (may be changed using the 'nfs.cache_getent' kernel boot parameter)
- is run, with two arguments:
- - the cache name, "dns_resolve"
- - the hostname to resolve
-
- (3) After looking up the corresponding ip address, the helper script
- writes the result into the rpc_pipefs pseudo-file
- '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
- in the following (text) format:
-
- "<ip address> <hostname> <ttl>\n"
-
- Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
- (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
- <hostname> is identical to the second argument of the helper
- script, and <ttl> is the 'time to live' of this cache entry (in
- units of seconds).
-
- Note: If <ip address> is invalid, say the string "0", then a negative
- entry is created, which will cause the kernel to treat the hostname
- as having no valid DNS translation.
-
-
-
-
-A basic sample /sbin/nfs_cache_getent
-=====================================
-
-#!/bin/bash
-#
-ttl=600
-#
-cut=/usr/bin/cut
-getent=/usr/bin/getent
-rpc_pipefs=/var/lib/nfs/rpc_pipefs
-#
-die()
-{
- echo "Usage: $0 cache_name entry_name"
- exit 1
-}
-
-[ $# -lt 2 ] && die
-cachename="$1"
-cache_path=${rpc_pipefs}/cache/${cachename}/channel
-
-case "${cachename}" in
- dns_resolve)
- name="$2"
- result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
- [ -z "${result}" ] && result="0"
- ;;
- *)
- die
- ;;
-esac
-echo "${result} ${name} ${ttl}" >${cache_path}
-
--- /dev/null
+00-INDEX
+ - this file (nfs-related documentation).
+Exporting
+ - explanation of how to make filesystems exportable.
+nfs.txt
+ - nfs client, and DNS resolution for fs_locations.
+nfs41-server.txt
+ - info on the Linux server implementation of NFSv4 minor version 1.
+nfs-rdma.txt
+ - how to install and setup the Linux NFS/RDMA client and server software
+nfsroot.txt
+ - short guide on setting up a diskless box with NFS root filesystem.
--- /dev/null
+
+Making Filesystems Exportable
+=============================
+
+Overview
+--------
+
+All filesystem operations require a dentry (or two) as a starting
+point. Local applications have a reference-counted hold on suitable
+dentries via open file descriptors or cwd/root. However remote
+applications that access a filesystem via a remote filesystem protocol
+such as NFS may not be able to hold such a reference, and so need a
+different way to refer to a particular dentry. As the alternative
+form of reference needs to be stable across renames, truncates, and
+server-reboot (among other things, though these tend to be the most
+problematic), there is no simple answer like 'filename'.
+
+The mechanism discussed here allows each filesystem implementation to
+specify how to generate an opaque (outside of the filesystem) byte
+string for any dentry, and how to find an appropriate dentry for any
+given opaque byte string.
+This byte string will be called a "filehandle fragment" as it
+corresponds to part of an NFS filehandle.
+
+A filesystem which supports the mapping between filehandle fragments
+and dentries will be termed "exportable".
+
+
+
+Dcache Issues
+-------------
+
+The dcache normally contains a proper prefix of any given filesystem
+tree. This means that if any filesystem object is in the dcache, then
+all of the ancestors of that filesystem object are also in the dcache.
+As normal access is by filename this prefix is created naturally and
+maintained easily (by each object maintaining a reference count on
+its parent).
+
+However when objects are included into the dcache by interpreting a
+filehandle fragment, there is no automatic creation of a path prefix
+for the object. This leads to two related but distinct features of
+the dcache that are not needed for normal filesystem access.
+
+1/ The dcache must sometimes contain objects that are not part of the
+ proper prefix. i.e that are not connected to the root.
+2/ The dcache must be prepared for a newly found (via ->lookup) directory
+ to already have a (non-connected) dentry, and must be able to move
+ that dentry into place (based on the parent and name in the
+ ->lookup). This is particularly needed for directories as
+ it is a dcache invariant that directories only have one dentry.
+
+To implement these features, the dcache has:
+
+a/ A dentry flag DCACHE_DISCONNECTED which is set on
+ any dentry that might not be part of the proper prefix.
+ This is set when anonymous dentries are created, and cleared when a
+ dentry is noticed to be a child of a dentry which is in the proper
+ prefix.
+
+b/ A per-superblock list "s_anon" of dentries which are the roots of
+ subtrees that are not in the proper prefix. These dentries, as
+ well as the proper prefix, need to be released at unmount time. As
+ these dentries will not be hashed, they are linked together on the
+ d_hash list_head.
+
+c/ Helper routines to allocate anonymous dentries, and to help attach
+ loose directory dentries at lookup time. They are:
+ d_alloc_anon(inode) will return a dentry for the given inode.
+ If the inode already has a dentry, one of those is returned.
+ If it doesn't, a new anonymous (IS_ROOT and
+ DCACHE_DISCONNECTED) dentry is allocated and attached.
+ In the case of a directory, care is taken that only one dentry
+ can ever be attached.
+ d_splice_alias(inode, dentry) will make sure that there is a
+ dentry with the same name and parent as the given dentry, and
+ which refers to the given inode.
+ If the inode is a directory and already has a dentry, then that
+ dentry is d_moved over the given dentry.
+ If the passed dentry gets attached, care is taken that this is
+ mutually exclusive to a d_alloc_anon operation.
+ If the passed dentry is used, NULL is returned, else the used
+ dentry is returned. This corresponds to the calling pattern of
+ ->lookup.
+
+
+Filesystem Issues
+-----------------
+
+For a filesystem to be exportable it must:
+
+ 1/ provide the filehandle fragment routines described below.
+ 2/ make sure that d_splice_alias is used rather than d_add
+ when ->lookup finds an inode for a given parent and name.
+ Typically the ->lookup routine will end with a:
+
+ return d_splice_alias(inode, dentry);
+ }
+
+
+
+ A file system implementation declares that instances of the filesystem
+are exportable by setting the s_export_op field in the struct
+super_block. This field must point to a "struct export_operations"
+struct which has the following members:
+
+ encode_fh (optional)
+ Takes a dentry and creates a filehandle fragment which can later be used
+ to find or create a dentry for the same object. The default
+ implementation creates a filehandle fragment that encodes a 32bit inode
+ and generation number for the inode encoded, and if necessary the
+ same information for the parent.
+
+ fh_to_dentry (mandatory)
+ Given a filehandle fragment, this should find the implied object and
+ create a dentry for it (possibly with d_alloc_anon).
+
+ fh_to_parent (optional but strongly recommended)
+ Given a filehandle fragment, this should find the parent of the
+ implied object and create a dentry for it (possibly with d_alloc_anon).
+ May fail if the filehandle fragment is too small.
+
+ get_parent (optional but strongly recommended)
+ When given a dentry for a directory, this should return a dentry for
+ the parent. Quite possibly the parent dentry will have been allocated
+ by d_alloc_anon. The default get_parent function just returns an error
+ so any filehandle lookup that requires finding a parent will fail.
+ ->lookup("..") is *not* used as a default as it can leave ".." entries
+ in the dcache which are too messy to work with.
+
+ get_name (optional)
+ When given a parent dentry and a child dentry, this should find a name
+ in the directory identified by the parent dentry, which leads to the
+ object identified by the child dentry. If no get_name function is
+ supplied, a default implementation is provided which uses vfs_readdir
+ to find potential names, and matches inode numbers to find the correct
+ match.
+
+
+A filehandle fragment consists of an array of 1 or more 4byte words,
+together with a one byte "type".
+The decode_fh routine should not depend on the stated size that is
+passed to it. This size may be larger than the original filehandle
+generated by encode_fh, in which case it will have been padded with
+nuls. Rather, the encode_fh routine should choose a "type" which
+indicates the decode_fh how much of the filehandle is valid, and how
+it should be interpreted.
--- /dev/null
+################################################################################
+# #
+# NFS/RDMA README #
+# #
+################################################################################
+
+ Author: NetApp and Open Grid Computing
+ Date: May 29, 2008
+
+Table of Contents
+~~~~~~~~~~~~~~~~~
+ - Overview
+ - Getting Help
+ - Installation
+ - Check RDMA and NFS Setup
+ - NFS/RDMA Setup
+
+Overview
+~~~~~~~~
+
+ This document describes how to install and setup the Linux NFS/RDMA client
+ and server software.
+
+ The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server
+ was first included in the following release, Linux 2.6.25.
+
+ In our testing, we have obtained excellent performance results (full 10Gbit
+ wire bandwidth at minimal client CPU) under many workloads. The code passes
+ the full Connectathon test suite and operates over both Infiniband and iWARP
+ RDMA adapters.
+
+Getting Help
+~~~~~~~~~~~~
+
+ If you get stuck, you can ask questions on the
+
+ nfs-rdma-devel@lists.sourceforge.net
+
+ mailing list.
+
+Installation
+~~~~~~~~~~~~
+
+ These instructions are a step by step guide to building a machine for
+ use with NFS/RDMA.
+
+ - Install an RDMA device
+
+ Any device supported by the drivers in drivers/infiniband/hw is acceptable.
+
+ Testing has been performed using several Mellanox-based IB cards, the
+ Ammasso AMS1100 iWARP adapter, and the Chelsio cxgb3 iWARP adapter.
+
+ - Install a Linux distribution and tools
+
+ The first kernel release to contain both the NFS/RDMA client and server was
+ Linux 2.6.25 Therefore, a distribution compatible with this and subsequent
+ Linux kernel release should be installed.
+
+ The procedures described in this document have been tested with
+ distributions from Red Hat's Fedora Project (http://fedora.redhat.com/).
+
+ - Install nfs-utils-1.1.2 or greater on the client
+
+ An NFS/RDMA mount point can be obtained by using the mount.nfs command in
+ nfs-utils-1.1.2 or greater (nfs-utils-1.1.1 was the first nfs-utils
+ version with support for NFS/RDMA mounts, but for various reasons we
+ recommend using nfs-utils-1.1.2 or greater). To see which version of
+ mount.nfs you are using, type:
+
+ $ /sbin/mount.nfs -V
+
+ If the version is less than 1.1.2 or the command does not exist,
+ you should install the latest version of nfs-utils.
+
+ Download the latest package from:
+
+ http://www.kernel.org/pub/linux/utils/nfs
+
+ Uncompress the package and follow the installation instructions.
+
+ If you will not need the idmapper and gssd executables (you do not need
+ these to create an NFS/RDMA enabled mount command), the installation
+ process can be simplified by disabling these features when running
+ configure:
+
+ $ ./configure --disable-gss --disable-nfsv4
+
+ To build nfs-utils you will need the tcp_wrappers package installed. For
+ more information on this see the package's README and INSTALL files.
+
+ After building the nfs-utils package, there will be a mount.nfs binary in
+ the utils/mount directory. This binary can be used to initiate NFS v2, v3,
+ or v4 mounts. To initiate a v4 mount, the binary must be called
+ mount.nfs4. The standard technique is to create a symlink called
+ mount.nfs4 to mount.nfs.
+
+ This mount.nfs binary should be installed at /sbin/mount.nfs as follows:
+
+ $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
+
+ In this location, mount.nfs will be invoked automatically for NFS mounts
+ by the system mount command.
+
+ NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
+ on the NFS client machine. You do not need this specific version of
+ nfs-utils on the server. Furthermore, only the mount.nfs command from
+ nfs-utils-1.1.2 is needed on the client.
+
+ - Install a Linux kernel with NFS/RDMA
+
+ The NFS/RDMA client and server are both included in the mainline Linux
+ kernel version 2.6.25 and later. This and other versions of the 2.6 Linux
+ kernel can be found at:
+
+ ftp://ftp.kernel.org/pub/linux/kernel/v2.6/
+
+ Download the sources and place them in an appropriate location.
+
+ - Configure the RDMA stack
+
+ Make sure your kernel configuration has RDMA support enabled. Under
+ Device Drivers -> InfiniBand support, update the kernel configuration
+ to enable InfiniBand support [NOTE: the option name is misleading. Enabling
+ InfiniBand support is required for all RDMA devices (IB, iWARP, etc.)].
+
+ Enable the appropriate IB HCA support (mlx4, mthca, ehca, ipath, etc.) or
+ iWARP adapter support (amso, cxgb3, etc.).
+
+ If you are using InfiniBand, be sure to enable IP-over-InfiniBand support.
+
+ - Configure the NFS client and server
+
+ Your kernel configuration must also have NFS file system support and/or
+ NFS server support enabled. These and other NFS related configuration
+ options can be found under File Systems -> Network File Systems.
+
+ - Build, install, reboot
+
+ The NFS/RDMA code will be enabled automatically if NFS and RDMA
+ are turned on. The NFS/RDMA client and server are configured via the hidden
+ SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
+ value of SUNRPC_XPRT_RDMA will be:
+
+ - N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
+ and server will not be built
+ - M if both SUNRPC and INFINIBAND are on (M or Y) and at least one is M,
+ in this case the NFS/RDMA client and server will be built as modules
+ - Y if both SUNRPC and INFINIBAND are Y, in this case the NFS/RDMA client
+ and server will be built into the kernel
+
+ Therefore, if you have followed the steps above and turned no NFS and RDMA,
+ the NFS/RDMA client and server will be built.
+
+ Build a new kernel, install it, boot it.
+
+Check RDMA and NFS Setup
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Before configuring the NFS/RDMA software, it is a good idea to test
+ your new kernel to ensure that the kernel is working correctly.
+ In particular, it is a good idea to verify that the RDMA stack
+ is functioning as expected and standard NFS over TCP/IP and/or UDP/IP
+ is working properly.
+
+ - Check RDMA Setup
+
+ If you built the RDMA components as modules, load them at
+ this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel
+ card:
+
+ $ modprobe ib_mthca
+ $ modprobe ib_ipoib
+
+ If you are using InfiniBand, make sure there is a Subnet Manager (SM)
+ running on the network. If your IB switch has an embedded SM, you can
+ use it. Otherwise, you will need to run an SM, such as OpenSM, on one
+ of your end nodes.
+
+ If an SM is running on your network, you should see the following:
+
+ $ cat /sys/class/infiniband/driverX/ports/1/state
+ 4: ACTIVE
+
+ where driverX is mthca0, ipath5, ehca3, etc.
+
+ To further test the InfiniBand software stack, use IPoIB (this
+ assumes you have two IB hosts named host1 and host2):
+
+ host1$ ifconfig ib0 a.b.c.x
+ host2$ ifconfig ib0 a.b.c.y
+ host1$ ping a.b.c.y
+ host2$ ping a.b.c.x
+
+ For other device types, follow the appropriate procedures.
+
+ - Check NFS Setup
+
+ For the NFS components enabled above (client and/or server),
+ test their functionality over standard Ethernet using TCP/IP or UDP/IP.
+
+NFS/RDMA Setup
+~~~~~~~~~~~~~~
+
+ We recommend that you use two machines, one to act as the client and
+ one to act as the server.
+
+ One time configuration:
+
+ - On the server system, configure the /etc/exports file and
+ start the NFS/RDMA server.
+
+ Exports entries with the following formats have been tested:
+
+ /vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash)
+ /vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash)
+
+ The IP address(es) is(are) the client's IPoIB address for an InfiniBand
+ HCA or the cleint's iWARP address(es) for an RNIC.
+
+ NOTE: The "insecure" option must be used because the NFS/RDMA client does
+ not use a reserved port.
+
+ Each time a machine boots:
+
+ - Load and configure the RDMA drivers
+
+ For InfiniBand using a Mellanox adapter:
+
+ $ modprobe ib_mthca
+ $ modprobe ib_ipoib
+ $ ifconfig ib0 a.b.c.d
+
+ NOTE: use unique addresses for the client and server
+
+ - Start the NFS server
+
+ If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+ kernel config), load the RDMA transport module:
+
+ $ modprobe svcrdma
+
+ Regardless of how the server was built (module or built-in), start the
+ server:
+
+ $ /etc/init.d/nfs start
+
+ or
+
+ $ service nfs start
+
+ Instruct the server to listen on the RDMA transport:
+
+ $ echo rdma 20049 > /proc/fs/nfsd/portlist
+
+ - On the client system
+
+ If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+ kernel config), load the RDMA client module:
+
+ $ modprobe xprtrdma.ko
+
+ Regardless of how the client was built (module or built-in), use this
+ command to mount the NFS/RDMA server:
+
+ $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
+
+ To verify that the mount is using RDMA, run "cat /proc/mounts" and check
+ the "proto" field for the given mount.
+
+ Congratulations! You're using NFS/RDMA!
--- /dev/null
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+ http://tools.ietf.org/html/rfc3530#section-6
+and
+ http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+ (1) The process checks the dns_resolve cache to see if it contains a
+ valid entry. If so, it returns that entry and exits.
+
+ (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+ (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+ is run, with two arguments:
+ - the cache name, "dns_resolve"
+ - the hostname to resolve
+
+ (3) After looking up the corresponding ip address, the helper script
+ writes the result into the rpc_pipefs pseudo-file
+ '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+ in the following (text) format:
+
+ "<ip address> <hostname> <ttl>\n"
+
+ Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+ (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+ <hostname> is identical to the second argument of the helper
+ script, and <ttl> is the 'time to live' of this cache entry (in
+ units of seconds).
+
+ Note: If <ip address> is invalid, say the string "0", then a negative
+ entry is created, which will cause the kernel to treat the hostname
+ as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+ echo "Usage: $0 cache_name entry_name"
+ exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+ dns_resolve)
+ name="$2"
+ result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+ [ -z "${result}" ] && result="0"
+ ;;
+ *)
+ die
+ ;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+
--- /dev/null
+NFSv4.1 Server Implementation
+
+Server support for minorversion 1 can be controlled using the
+/proc/fs/nfsd/versions control file. The string output returned
+by reading this file will contain either "+4.1" or "-4.1"
+correspondingly.
+
+Currently, server support for minorversion 1 is disabled by default.
+It can be enabled at run time by writing the string "+4.1" to
+the /proc/fs/nfsd/versions control file. Note that to write this
+control file, the nfsd service must be taken down. Use your user-mode
+nfs-utils to set this up; see rpc.nfsd(8)
+
+(Warning: older servers will interpret "+4.1" and "-4.1" as "+4" and
+"-4", respectively. Therefore, code meant to work on both new and old
+kernels must turn 4.1 on or off *before* turning support for version 4
+on or off; rpc.nfsd does this correctly.)
+
+The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based
+on the latest NFSv4.1 Internet Draft:
+http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29
+
+From the many new features in NFSv4.1 the current implementation
+focuses on the mandatory-to-implement NFSv4.1 Sessions, providing
+"exactly once" semantics and better control and throttling of the
+resources allocated for each client.
+
+Other NFSv4.1 features, Parallel NFS operations in particular,
+are still under development out of tree.
+See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design
+for more information.
+
+The current implementation is intended for developers only: while it
+does support ordinary file operations on clients we have tested against
+(including the linux client), it is incomplete in ways which may limit
+features unexpectedly, cause known bugs in rare cases, or cause
+interoperability problems with future clients. Known issues:
+
+ - gss support is questionable: currently mounts with kerberos
+ from a linux client are possible, but we aren't really
+ conformant with the spec (for example, we don't use kerberos
+ on the backchannel correctly).
+ - no trunking support: no clients currently take advantage of
+ trunking, but this is a mandatory feature, and its use is
+ recommended to clients in a number of places. (E.g. to ensure
+ timely renewal in case an existing connection's retry timeouts
+ have gotten too long; see section 8.3 of the draft.)
+ Therefore, lack of this feature may cause future clients to
+ fail.
+ - Incomplete backchannel support: incomplete backchannel gss
+ support and no support for BACKCHANNEL_CTL mean that
+ callbacks (hence delegations and layouts) may not be
+ available and clients confused by the incomplete
+ implementation may fail.
+ - Server reboot recovery is unsupported; if the server reboots,
+ clients may fail.
+ - We do not support SSV, which provides security for shared
+ client-server state (thus preventing unauthorized tampering
+ with locks and opens, for example). It is mandatory for
+ servers to support this, though no clients use it yet.
+ - Mandatory operations which we do not support, such as
+ DESTROY_CLIENTID, FREE_STATEID, SECINFO_NO_NAME, and
+ TEST_STATEID, are not currently used by clients, but will be
+ (and the spec recommends their uses in common cases), and
+ clients should not be expected to know how to recover from the
+ case where they are not supported. This will eventually cause
+ interoperability failures.
+
+In addition, some limitations are inherited from the current NFSv4
+implementation:
+
+ - Incomplete delegation enforcement: if a file is renamed or
+ unlinked, a client holding a delegation may continue to
+ indefinitely allow opens of the file under the old name.
+
+The table below, taken from the NFSv4.1 document, lists
+the operations that are mandatory to implement (REQ), optional
+(OPT), and NFSv4.0 operations that are required not to implement (MNI)
+in minor version 1. The first column indicates the operations that
+are not supported yet by the linux server implementation.
+
+The OPTIONAL features identified and their abbreviations are as follows:
+ pNFS Parallel NFS
+ FDELG File Delegations
+ DDELG Directory Delegations
+
+The following abbreviations indicate the linux server implementation status.
+ I Implemented NFSv4.1 operations.
+ NS Not Supported.
+ NS* unimplemented optional feature.
+ P pNFS features implemented out of tree.
+ PNS pNFS features that are not supported yet (out of tree).
+
+Operations
+
+ +----------------------+------------+--------------+----------------+
+ | Operation | REQ, REC, | Feature | Definition |
+ | | OPT, or | (REQ, REC, | |
+ | | MNI | or OPT) | |
+ +----------------------+------------+--------------+----------------+
+ | ACCESS | REQ | | Section 18.1 |
+NS | BACKCHANNEL_CTL | REQ | | Section 18.33 |
+NS | BIND_CONN_TO_SESSION | REQ | | Section 18.34 |
+ | CLOSE | REQ | | Section 18.2 |
+ | COMMIT | REQ | | Section 18.3 |
+ | CREATE | REQ | | Section 18.4 |
+I | CREATE_SESSION | REQ | | Section 18.36 |
+NS*| DELEGPURGE | OPT | FDELG (REQ) | Section 18.5 |
+ | DELEGRETURN | OPT | FDELG, | Section 18.6 |
+ | | | DDELG, pNFS | |
+ | | | (REQ) | |
+NS | DESTROY_CLIENTID | REQ | | Section 18.50 |
+I | DESTROY_SESSION | REQ | | Section 18.37 |
+I | EXCHANGE_ID | REQ | | Section 18.35 |
+NS | FREE_STATEID | REQ | | Section 18.38 |
+ | GETATTR | REQ | | Section 18.7 |
+P | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 |
+P | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 |
+ | GETFH | REQ | | Section 18.8 |
+NS*| GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 |
+P | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 |
+P | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 |
+P | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 |
+ | LINK | OPT | | Section 18.9 |
+ | LOCK | REQ | | Section 18.10 |
+ | LOCKT | REQ | | Section 18.11 |
+ | LOCKU | REQ | | Section 18.12 |
+ | LOOKUP | REQ | | Section 18.13 |
+ | LOOKUPP | REQ | | Section 18.14 |
+ | NVERIFY | REQ | | Section 18.15 |
+ | OPEN | REQ | | Section 18.16 |
+NS*| OPENATTR | OPT | | Section 18.17 |
+ | OPEN_CONFIRM | MNI | | N/A |
+ | OPEN_DOWNGRADE | REQ | | Section 18.18 |
+ | PUTFH | REQ | | Section 18.19 |
+ | PUTPUBFH | REQ | | Section 18.20 |
+ | PUTROOTFH | REQ | | Section 18.21 |
+ | READ | REQ | | Section 18.22 |
+ | READDIR | REQ | | Section 18.23 |
+ | READLINK | OPT | | Section 18.24 |
+NS | RECLAIM_COMPLETE | REQ | | Section 18.51 |
+ | RELEASE_LOCKOWNER | MNI | | N/A |
+ | REMOVE | REQ | | Section 18.25 |
+ | RENAME | REQ | | Section 18.26 |
+ | RENEW | MNI | | N/A |
+ | RESTOREFH | REQ | | Section 18.27 |
+ | SAVEFH | REQ | | Section 18.28 |
+ | SECINFO | REQ | | Section 18.29 |
+NS | SECINFO_NO_NAME | REC | pNFS files | Section 18.45, |
+ | | | layout (REQ) | Section 13.12 |
+I | SEQUENCE | REQ | | Section 18.46 |
+ | SETATTR | REQ | | Section 18.30 |
+ | SETCLIENTID | MNI | | N/A |
+ | SETCLIENTID_CONFIRM | MNI | | N/A |
+NS | SET_SSV | REQ | | Section 18.47 |
+NS | TEST_STATEID | REQ | | Section 18.48 |
+ | VERIFY | REQ | | Section 18.31 |
+NS*| WANT_DELEGATION | OPT | FDELG (OPT) | Section 18.49 |
+ | WRITE | REQ | | Section 18.32 |
+
+Callback Operations
+
+ +-------------------------+-----------+-------------+---------------+
+ | Operation | REQ, REC, | Feature | Definition |
+ | | OPT, or | (REQ, REC, | |
+ | | MNI | or OPT) | |
+ +-------------------------+-----------+-------------+---------------+
+ | CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 |
+P | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 |
+NS*| CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 |
+P | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 |
+NS*| CB_NOTIFY_LOCK | OPT | | Section 20.11 |
+NS*| CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 |
+ | CB_RECALL | OPT | FDELG, | Section 20.2 |
+ | | | DDELG, pNFS | |
+ | | | (REQ) | |
+NS*| CB_RECALL_ANY | OPT | FDELG, | Section 20.6 |
+ | | | DDELG, pNFS | |
+ | | | (REQ) | |
+NS | CB_RECALL_SLOT | REQ | | Section 20.8 |
+NS*| CB_RECALLABLE_OBJ_AVAIL | OPT | DDELG, pNFS | Section 20.7 |
+ | | | (REQ) | |
+I | CB_SEQUENCE | OPT | FDELG, | Section 20.9 |
+ | | | DDELG, pNFS | |
+ | | | (REQ) | |
+NS*| CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 |
+ | | | DDELG, pNFS | |
+ | | | (REQ) | |
+ +-------------------------+-----------+-------------+---------------+
+
+Implementation notes:
+
+DELEGPURGE:
+* mandatory only for servers that support CLAIM_DELEGATE_PREV and/or
+ CLAIM_DELEG_PREV_FH (which allows clients to keep delegations that
+ persist across client reboots). Thus we need not implement this for
+ now.
+
+EXCHANGE_ID:
+* only SP4_NONE state protection supported
+* implementation ids are ignored
+
+CREATE_SESSION:
+* backchannel attributes are ignored
+* backchannel security parameters are ignored
+
+SEQUENCE:
+* no support for dynamic slot table renegotiation (optional)
+
+nfsv4.1 COMPOUND rules:
+The following cases aren't supported yet:
+* Enforcing of NFS4ERR_NOT_ONLY_OP for: BIND_CONN_TO_SESSION, CREATE_SESSION,
+ DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID.
+* DESTROY_SESSION MUST be the final operation in the COMPOUND request.
+
+Nonstandard compound limitations:
+* No support for a sessions fore channel RPC compound that requires both a
+ ca_maxrequestsize request and a ca_maxresponsesize reply, so we may
+ fail to live up to the promise we made in CREATE_SESSION fore channel
+ negotiation.
+* No more than one IO operation (read, write, readdir) allowed per
+ compound.
--- /dev/null
+Mounting the root filesystem via NFS (nfsroot)
+===============================================
+
+Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
+Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
+Updated 2006 by Horms <horms@verge.net.au>
+
+
+
+In order to use a diskless system, such as an X-terminal or printer server
+for example, it is necessary for the root filesystem to be present on a
+non-disk device. This may be an initramfs (see Documentation/filesystems/
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a
+filesystem mounted via NFS. The following text describes on how to use NFS
+for the root filesystem. For the rest of this text 'client' means the
+diskless system, and 'server' means the NFS server.
+
+
+
+
+1.) Enabling nfsroot capabilities
+ -----------------------------
+
+In order to use nfsroot, NFS client support needs to be selected as
+built-in during configuration. Once this has been selected, the nfsroot
+option will become available, which should also be selected.
+
+In the networking options, kernel level autoconfiguration can be selected,
+along with the types of autoconfiguration to support. Selecting all of
+DHCP, BOOTP and RARP is safe.
+
+
+
+
+2.) Kernel command line
+ -------------------
+
+When the kernel has been loaded by a boot loader (see below) it needs to be
+told what root fs device to use. And in the case of nfsroot, where to find
+both the server and the name of the directory on the server to mount as root.
+This can be established using the following kernel command line parameters:
+
+
+root=/dev/nfs
+
+ This is necessary to enable the pseudo-NFS-device. Note that it's not a
+ real device but just a synonym to tell the kernel to use NFS instead of
+ a real device.
+
+
+nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
+
+ If the `nfsroot' parameter is NOT given on the command line,
+ the default "/tftpboot/%s" will be used.
+
+ <server-ip> Specifies the IP address of the NFS server.
+ The default address is determined by the `ip' parameter
+ (see below). This parameter allows the use of different
+ servers for IP autoconfiguration and NFS.
+
+ <root-dir> Name of the directory on the server to mount as root.
+ If there is a "%s" token in the string, it will be
+ replaced by the ASCII-representation of the client's
+ IP address.
+
+ <nfs-options> Standard NFS options. All options are separated by commas.
+ The following defaults are used:
+ port = as given by server portmap daemon
+ rsize = 4096
+ wsize = 4096
+ timeo = 7
+ retrans = 3
+ acregmin = 3
+ acregmax = 60
+ acdirmin = 30
+ acdirmax = 60
+ flags = hard, nointr, noposix, cto, ac
+
+
+ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
+
+ This parameter tells the kernel how to configure IP addresses of devices
+ and also how to set up the IP routing table. It was originally called
+ `nfsaddrs', but now the boot-time IP configuration works independently of
+ NFS, so it was renamed to `ip' and the old name remained as an alias for
+ compatibility reasons.
+
+ If this parameter is missing from the kernel command line, all fields are
+ assumed to be empty, and the defaults mentioned below apply. In general
+ this means that the kernel tries to configure everything using
+ autoconfiguration.
+
+ The <autoconf> parameter can appear alone as the value to the `ip'
+ parameter (without all the ':' characters before). If the value is
+ "ip=off" or "ip=none", no autoconfiguration will take place, otherwise
+ autoconfiguration will take place. The most common way to use this
+ is "ip=dhcp".
+
+ <client-ip> IP address of the client.
+
+ Default: Determined using autoconfiguration.
+
+ <server-ip> IP address of the NFS server. If RARP is used to determine
+ the client address and this parameter is NOT empty only
+ replies from the specified server are accepted.
+
+ Only required for NFS root. That is autoconfiguration
+ will not be triggered if it is missing and NFS root is not
+ in operation.
+
+ Default: Determined using autoconfiguration.
+ The address of the autoconfiguration server is used.
+
+ <gw-ip> IP address of a gateway if the server is on a different subnet.
+
+ Default: Determined using autoconfiguration.
+
+ <netmask> Netmask for local network interface. If unspecified
+ the netmask is derived from the client IP address assuming
+ classful addressing.
+
+ Default: Determined using autoconfiguration.
+
+ <hostname> Name of the client. May be supplied by autoconfiguration,
+ but its absence will not trigger autoconfiguration.
+
+ Default: Client IP address is used in ASCII notation.
+
+ <device> Name of network device to use.
+
+ Default: If the host only has one device, it is used.
+ Otherwise the device is determined using
+ autoconfiguration. This is done by sending
+ autoconfiguration requests out of all devices,
+ and using the device that received the first reply.
+
+ <autoconf> Method to use for autoconfiguration. In the case of options
+ which specify multiple autoconfiguration protocols,
+ requests are sent using all protocols, and the first one
+ to reply is used.
+
+ Only autoconfiguration protocols that have been compiled
+ into the kernel will be used, regardless of the value of
+ this option.
+
+ off or none: don't use autoconfiguration
+ (do static IP assignment instead)
+ on or any: use any protocol available in the kernel
+ (default)
+ dhcp: use DHCP
+ bootp: use BOOTP
+ rarp: use RARP
+ both: use both BOOTP and RARP but not DHCP
+ (old option kept for backwards compatibility)
+
+ Default: any
+
+
+
+
+3.) Boot Loader
+ ----------
+
+To get the kernel into memory different approaches can be used.
+They depend on various facilities being available:
+
+
+3.1) Booting from a floppy using syslinux
+
+ When building kernels, an easy way to create a boot floppy that uses
+ syslinux is to use the zdisk or bzdisk make targets which use zimage
+ and bzimage images respectively. Both targets accept the
+ FDARGS parameter which can be used to set the kernel command line.
+
+ e.g.
+ make bzdisk FDARGS="root=/dev/nfs"
+
+ Note that the user running this command will need to have
+ access to the floppy drive device, /dev/fd0
+
+ For more information on syslinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
+
+ N.B: Previously it was possible to write a kernel directly to
+ a floppy using dd, configure the boot device using rdev, and
+ boot using the resulting floppy. Linux no longer supports this
+ method of booting.
+
+3.2) Booting from a cdrom using isolinux
+
+ When building kernels, an easy way to create a bootable cdrom that
+ uses isolinux is to use the isoimage target which uses a bzimage
+ image. Like zdisk and bzdisk, this target accepts the FDARGS
+ parameter which can be used to set the kernel command line.
+
+ e.g.
+ make isoimage FDARGS="root=/dev/nfs"
+
+ The resulting iso image will be arch/<ARCH>/boot/image.iso
+ This can be written to a cdrom using a variety of tools including
+ cdrecord.
+
+ e.g.
+ cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
+
+ For more information on isolinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
+
+3.2) Using LILO
+ When using LILO all the necessary command line parameters may be
+ specified using the 'append=' directive in the LILO configuration
+ file.
+
+ However, to use the 'root=' directive you also need to create
+ a dummy root device, which may be removed after LILO is run.
+
+ mknod /dev/boot255 c 0 255
+
+ For information on configuring LILO, please refer to its documentation.
+
+3.3) Using GRUB
+ When using GRUB, kernel parameter are simply appended after the kernel
+ specification: kernel <kernel> <parameters>
+
+3.4) Using loadlin
+ loadlin may be used to boot Linux from a DOS command prompt without
+ requiring a local hard disk to mount as root. This has not been
+ thoroughly tested by the authors of this document, but in general
+ it should be possible configure the kernel command line similarly
+ to the configuration of LILO.
+
+ Please refer to the loadlin documentation for further information.
+
+3.5) Using a boot ROM
+ This is probably the most elegant way of booting a diskless client.
+ With a boot ROM the kernel is loaded using the TFTP protocol. The
+ authors of this document are not aware of any no commercial boot
+ ROMs that support booting Linux over the network. However, there
+ are two free implementations of a boot ROM, netboot-nfs and
+ etherboot, both of which are available on sunsite.unc.edu, and both
+ of which contain everything you need to boot a diskless Linux client.
+
+3.6) Using pxelinux
+ Pxelinux may be used to boot linux using the PXE boot loader
+ which is present on many modern network cards.
+
+ When using pxelinux, the kernel image is specified using
+ "kernel <relative-path-below /tftpboot>". The nfsroot parameters
+ are passed to the kernel by adding them to the "append" line.
+ It is common to use serial console in conjunction with pxeliunx,
+ see Documentation/serial-console.txt for more information.
+
+ For more information on isolinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
+
+
+
+
+4.) Credits
+ -------
+
+ The nfsroot code in the kernel and the RARP support have been written
+ by Gero Kuhlmann <gero@gkminix.han.de>.
+
+ The rest of the IP layer autoconfiguration code has been written
+ by Martin Mares <mj@atrey.karlin.mff.cuni.cz>.
+
+ In order to write the initial version of nfsroot I would like to thank
+ Jens-Uwe Mager <jum@anubis.han.de> for his help.
+++ /dev/null
-NFSv4.1 Server Implementation
-
-Server support for minorversion 1 can be controlled using the
-/proc/fs/nfsd/versions control file. The string output returned
-by reading this file will contain either "+4.1" or "-4.1"
-correspondingly.
-
-Currently, server support for minorversion 1 is disabled by default.
-It can be enabled at run time by writing the string "+4.1" to
-the /proc/fs/nfsd/versions control file. Note that to write this
-control file, the nfsd service must be taken down. Use your user-mode
-nfs-utils to set this up; see rpc.nfsd(8)
-
-(Warning: older servers will interpret "+4.1" and "-4.1" as "+4" and
-"-4", respectively. Therefore, code meant to work on both new and old
-kernels must turn 4.1 on or off *before* turning support for version 4
-on or off; rpc.nfsd does this correctly.)
-
-The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based
-on the latest NFSv4.1 Internet Draft:
-http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29
-
-From the many new features in NFSv4.1 the current implementation
-focuses on the mandatory-to-implement NFSv4.1 Sessions, providing
-"exactly once" semantics and better control and throttling of the
-resources allocated for each client.
-
-Other NFSv4.1 features, Parallel NFS operations in particular,
-are still under development out of tree.
-See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design
-for more information.
-
-The current implementation is intended for developers only: while it
-does support ordinary file operations on clients we have tested against
-(including the linux client), it is incomplete in ways which may limit
-features unexpectedly, cause known bugs in rare cases, or cause
-interoperability problems with future clients. Known issues:
-
- - gss support is questionable: currently mounts with kerberos
- from a linux client are possible, but we aren't really
- conformant with the spec (for example, we don't use kerberos
- on the backchannel correctly).
- - no trunking support: no clients currently take advantage of
- trunking, but this is a mandatory feature, and its use is
- recommended to clients in a number of places. (E.g. to ensure
- timely renewal in case an existing connection's retry timeouts
- have gotten too long; see section 8.3 of the draft.)
- Therefore, lack of this feature may cause future clients to
- fail.
- - Incomplete backchannel support: incomplete backchannel gss
- support and no support for BACKCHANNEL_CTL mean that
- callbacks (hence delegations and layouts) may not be
- available and clients confused by the incomplete
- implementation may fail.
- - Server reboot recovery is unsupported; if the server reboots,
- clients may fail.
- - We do not support SSV, which provides security for shared
- client-server state (thus preventing unauthorized tampering
- with locks and opens, for example). It is mandatory for
- servers to support this, though no clients use it yet.
- - Mandatory operations which we do not support, such as
- DESTROY_CLIENTID, FREE_STATEID, SECINFO_NO_NAME, and
- TEST_STATEID, are not currently used by clients, but will be
- (and the spec recommends their uses in common cases), and
- clients should not be expected to know how to recover from the
- case where they are not supported. This will eventually cause
- interoperability failures.
-
-In addition, some limitations are inherited from the current NFSv4
-implementation:
-
- - Incomplete delegation enforcement: if a file is renamed or
- unlinked, a client holding a delegation may continue to
- indefinitely allow opens of the file under the old name.
-
-The table below, taken from the NFSv4.1 document, lists
-the operations that are mandatory to implement (REQ), optional
-(OPT), and NFSv4.0 operations that are required not to implement (MNI)
-in minor version 1. The first column indicates the operations that
-are not supported yet by the linux server implementation.
-
-The OPTIONAL features identified and their abbreviations are as follows:
- pNFS Parallel NFS
- FDELG File Delegations
- DDELG Directory Delegations
-
-The following abbreviations indicate the linux server implementation status.
- I Implemented NFSv4.1 operations.
- NS Not Supported.
- NS* unimplemented optional feature.
- P pNFS features implemented out of tree.
- PNS pNFS features that are not supported yet (out of tree).
-
-Operations
-
- +----------------------+------------+--------------+----------------+
- | Operation | REQ, REC, | Feature | Definition |
- | | OPT, or | (REQ, REC, | |
- | | MNI | or OPT) | |
- +----------------------+------------+--------------+----------------+
- | ACCESS | REQ | | Section 18.1 |
-NS | BACKCHANNEL_CTL | REQ | | Section 18.33 |
-NS | BIND_CONN_TO_SESSION | REQ | | Section 18.34 |
- | CLOSE | REQ | | Section 18.2 |
- | COMMIT | REQ | | Section 18.3 |
- | CREATE | REQ | | Section 18.4 |
-I | CREATE_SESSION | REQ | | Section 18.36 |
-NS*| DELEGPURGE | OPT | FDELG (REQ) | Section 18.5 |
- | DELEGRETURN | OPT | FDELG, | Section 18.6 |
- | | | DDELG, pNFS | |
- | | | (REQ) | |
-NS | DESTROY_CLIENTID | REQ | | Section 18.50 |
-I | DESTROY_SESSION | REQ | | Section 18.37 |
-I | EXCHANGE_ID | REQ | | Section 18.35 |
-NS | FREE_STATEID | REQ | | Section 18.38 |
- | GETATTR | REQ | | Section 18.7 |
-P | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 |
-P | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 |
- | GETFH | REQ | | Section 18.8 |
-NS*| GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 |
-P | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 |
-P | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 |
-P | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 |
- | LINK | OPT | | Section 18.9 |
- | LOCK | REQ | | Section 18.10 |
- | LOCKT | REQ | | Section 18.11 |
- | LOCKU | REQ | | Section 18.12 |
- | LOOKUP | REQ | | Section 18.13 |
- | LOOKUPP | REQ | | Section 18.14 |
- | NVERIFY | REQ | | Section 18.15 |
- | OPEN | REQ | | Section 18.16 |
-NS*| OPENATTR | OPT | | Section 18.17 |
- | OPEN_CONFIRM | MNI | | N/A |
- | OPEN_DOWNGRADE | REQ | | Section 18.18 |
- | PUTFH | REQ | | Section 18.19 |
- | PUTPUBFH | REQ | | Section 18.20 |
- | PUTROOTFH | REQ | | Section 18.21 |
- | READ | REQ | | Section 18.22 |
- | READDIR | REQ | | Section 18.23 |
- | READLINK | OPT | | Section 18.24 |
-NS | RECLAIM_COMPLETE | REQ | | Section 18.51 |
- | RELEASE_LOCKOWNER | MNI | | N/A |
- | REMOVE | REQ | | Section 18.25 |
- | RENAME | REQ | | Section 18.26 |
- | RENEW | MNI | | N/A |
- | RESTOREFH | REQ | | Section 18.27 |
- | SAVEFH | REQ | | Section 18.28 |
- | SECINFO | REQ | | Section 18.29 |
-NS | SECINFO_NO_NAME | REC | pNFS files | Section 18.45, |
- | | | layout (REQ) | Section 13.12 |
-I | SEQUENCE | REQ | | Section 18.46 |
- | SETATTR | REQ | | Section 18.30 |
- | SETCLIENTID | MNI | | N/A |
- | SETCLIENTID_CONFIRM | MNI | | N/A |
-NS | SET_SSV | REQ | | Section 18.47 |
-NS | TEST_STATEID | REQ | | Section 18.48 |
- | VERIFY | REQ | | Section 18.31 |
-NS*| WANT_DELEGATION | OPT | FDELG (OPT) | Section 18.49 |
- | WRITE | REQ | | Section 18.32 |
-
-Callback Operations
-
- +-------------------------+-----------+-------------+---------------+
- | Operation | REQ, REC, | Feature | Definition |
- | | OPT, or | (REQ, REC, | |
- | | MNI | or OPT) | |
- +-------------------------+-----------+-------------+---------------+
- | CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 |
-P | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 |
-NS*| CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 |
-P | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 |
-NS*| CB_NOTIFY_LOCK | OPT | | Section 20.11 |
-NS*| CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 |
- | CB_RECALL | OPT | FDELG, | Section 20.2 |
- | | | DDELG, pNFS | |
- | | | (REQ) | |
-NS*| CB_RECALL_ANY | OPT | FDELG, | Section 20.6 |
- | | | DDELG, pNFS | |
- | | | (REQ) | |
-NS | CB_RECALL_SLOT | REQ | | Section 20.8 |
-NS*| CB_RECALLABLE_OBJ_AVAIL | OPT | DDELG, pNFS | Section 20.7 |
- | | | (REQ) | |
-I | CB_SEQUENCE | OPT | FDELG, | Section 20.9 |
- | | | DDELG, pNFS | |
- | | | (REQ) | |
-NS*| CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 |
- | | | DDELG, pNFS | |
- | | | (REQ) | |
- +-------------------------+-----------+-------------+---------------+
-
-Implementation notes:
-
-DELEGPURGE:
-* mandatory only for servers that support CLAIM_DELEGATE_PREV and/or
- CLAIM_DELEG_PREV_FH (which allows clients to keep delegations that
- persist across client reboots). Thus we need not implement this for
- now.
-
-EXCHANGE_ID:
-* only SP4_NONE state protection supported
-* implementation ids are ignored
-
-CREATE_SESSION:
-* backchannel attributes are ignored
-* backchannel security parameters are ignored
-
-SEQUENCE:
-* no support for dynamic slot table renegotiation (optional)
-
-nfsv4.1 COMPOUND rules:
-The following cases aren't supported yet:
-* Enforcing of NFS4ERR_NOT_ONLY_OP for: BIND_CONN_TO_SESSION, CREATE_SESSION,
- DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID.
-* DESTROY_SESSION MUST be the final operation in the COMPOUND request.
-
-Nonstandard compound limitations:
-* No support for a sessions fore channel RPC compound that requires both a
- ca_maxrequestsize request and a ca_maxresponsesize reply, so we may
- fail to live up to the promise we made in CREATE_SESSION fore channel
- negotiation.
-* No more than one IO operation (read, write, readdir) allowed per
- compound.
+++ /dev/null
-Mounting the root filesystem via NFS (nfsroot)
-===============================================
-
-Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
-Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
-Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
-Updated 2006 by Horms <horms@verge.net.au>
-
-
-
-In order to use a diskless system, such as an X-terminal or printer server
-for example, it is necessary for the root filesystem to be present on a
-non-disk device. This may be an initramfs (see Documentation/filesystems/
-ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a
-filesystem mounted via NFS. The following text describes on how to use NFS
-for the root filesystem. For the rest of this text 'client' means the
-diskless system, and 'server' means the NFS server.
-
-
-
-
-1.) Enabling nfsroot capabilities
- -----------------------------
-
-In order to use nfsroot, NFS client support needs to be selected as
-built-in during configuration. Once this has been selected, the nfsroot
-option will become available, which should also be selected.
-
-In the networking options, kernel level autoconfiguration can be selected,
-along with the types of autoconfiguration to support. Selecting all of
-DHCP, BOOTP and RARP is safe.
-
-
-
-
-2.) Kernel command line
- -------------------
-
-When the kernel has been loaded by a boot loader (see below) it needs to be
-told what root fs device to use. And in the case of nfsroot, where to find
-both the server and the name of the directory on the server to mount as root.
-This can be established using the following kernel command line parameters:
-
-
-root=/dev/nfs
-
- This is necessary to enable the pseudo-NFS-device. Note that it's not a
- real device but just a synonym to tell the kernel to use NFS instead of
- a real device.
-
-
-nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
-
- If the `nfsroot' parameter is NOT given on the command line,
- the default "/tftpboot/%s" will be used.
-
- <server-ip> Specifies the IP address of the NFS server.
- The default address is determined by the `ip' parameter
- (see below). This parameter allows the use of different
- servers for IP autoconfiguration and NFS.
-
- <root-dir> Name of the directory on the server to mount as root.
- If there is a "%s" token in the string, it will be
- replaced by the ASCII-representation of the client's
- IP address.
-
- <nfs-options> Standard NFS options. All options are separated by commas.
- The following defaults are used:
- port = as given by server portmap daemon
- rsize = 4096
- wsize = 4096
- timeo = 7
- retrans = 3
- acregmin = 3
- acregmax = 60
- acdirmin = 30
- acdirmax = 60
- flags = hard, nointr, noposix, cto, ac
-
-
-ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
-
- This parameter tells the kernel how to configure IP addresses of devices
- and also how to set up the IP routing table. It was originally called
- `nfsaddrs', but now the boot-time IP configuration works independently of
- NFS, so it was renamed to `ip' and the old name remained as an alias for
- compatibility reasons.
-
- If this parameter is missing from the kernel command line, all fields are
- assumed to be empty, and the defaults mentioned below apply. In general
- this means that the kernel tries to configure everything using
- autoconfiguration.
-
- The <autoconf> parameter can appear alone as the value to the `ip'
- parameter (without all the ':' characters before). If the value is
- "ip=off" or "ip=none", no autoconfiguration will take place, otherwise
- autoconfiguration will take place. The most common way to use this
- is "ip=dhcp".
-
- <client-ip> IP address of the client.
-
- Default: Determined using autoconfiguration.
-
- <server-ip> IP address of the NFS server. If RARP is used to determine
- the client address and this parameter is NOT empty only
- replies from the specified server are accepted.
-
- Only required for NFS root. That is autoconfiguration
- will not be triggered if it is missing and NFS root is not
- in operation.
-
- Default: Determined using autoconfiguration.
- The address of the autoconfiguration server is used.
-
- <gw-ip> IP address of a gateway if the server is on a different subnet.
-
- Default: Determined using autoconfiguration.
-
- <netmask> Netmask for local network interface. If unspecified
- the netmask is derived from the client IP address assuming
- classful addressing.
-
- Default: Determined using autoconfiguration.
-
- <hostname> Name of the client. May be supplied by autoconfiguration,
- but its absence will not trigger autoconfiguration.
-
- Default: Client IP address is used in ASCII notation.
-
- <device> Name of network device to use.
-
- Default: If the host only has one device, it is used.
- Otherwise the device is determined using
- autoconfiguration. This is done by sending
- autoconfiguration requests out of all devices,
- and using the device that received the first reply.
-
- <autoconf> Method to use for autoconfiguration. In the case of options
- which specify multiple autoconfiguration protocols,
- requests are sent using all protocols, and the first one
- to reply is used.
-
- Only autoconfiguration protocols that have been compiled
- into the kernel will be used, regardless of the value of
- this option.
-
- off or none: don't use autoconfiguration
- (do static IP assignment instead)
- on or any: use any protocol available in the kernel
- (default)
- dhcp: use DHCP
- bootp: use BOOTP
- rarp: use RARP
- both: use both BOOTP and RARP but not DHCP
- (old option kept for backwards compatibility)
-
- Default: any
-
-
-
-
-3.) Boot Loader
- ----------
-
-To get the kernel into memory different approaches can be used.
-They depend on various facilities being available:
-
-
-3.1) Booting from a floppy using syslinux
-
- When building kernels, an easy way to create a boot floppy that uses
- syslinux is to use the zdisk or bzdisk make targets which use zimage
- and bzimage images respectively. Both targets accept the
- FDARGS parameter which can be used to set the kernel command line.
-
- e.g.
- make bzdisk FDARGS="root=/dev/nfs"
-
- Note that the user running this command will need to have
- access to the floppy drive device, /dev/fd0
-
- For more information on syslinux, including how to create bootdisks
- for prebuilt kernels, see http://syslinux.zytor.com/
-
- N.B: Previously it was possible to write a kernel directly to
- a floppy using dd, configure the boot device using rdev, and
- boot using the resulting floppy. Linux no longer supports this
- method of booting.
-
-3.2) Booting from a cdrom using isolinux
-
- When building kernels, an easy way to create a bootable cdrom that
- uses isolinux is to use the isoimage target which uses a bzimage
- image. Like zdisk and bzdisk, this target accepts the FDARGS
- parameter which can be used to set the kernel command line.
-
- e.g.
- make isoimage FDARGS="root=/dev/nfs"
-
- The resulting iso image will be arch/<ARCH>/boot/image.iso
- This can be written to a cdrom using a variety of tools including
- cdrecord.
-
- e.g.
- cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
-
- For more information on isolinux, including how to create bootdisks
- for prebuilt kernels, see http://syslinux.zytor.com/
-
-3.2) Using LILO
- When using LILO all the necessary command line parameters may be
- specified using the 'append=' directive in the LILO configuration
- file.
-
- However, to use the 'root=' directive you also need to create
- a dummy root device, which may be removed after LILO is run.
-
- mknod /dev/boot255 c 0 255
-
- For information on configuring LILO, please refer to its documentation.
-
-3.3) Using GRUB
- When using GRUB, kernel parameter are simply appended after the kernel
- specification: kernel <kernel> <parameters>
-
-3.4) Using loadlin
- loadlin may be used to boot Linux from a DOS command prompt without
- requiring a local hard disk to mount as root. This has not been
- thoroughly tested by the authors of this document, but in general
- it should be possible configure the kernel command line similarly
- to the configuration of LILO.
-
- Please refer to the loadlin documentation for further information.
-
-3.5) Using a boot ROM
- This is probably the most elegant way of booting a diskless client.
- With a boot ROM the kernel is loaded using the TFTP protocol. The
- authors of this document are not aware of any no commercial boot
- ROMs that support booting Linux over the network. However, there
- are two free implementations of a boot ROM, netboot-nfs and
- etherboot, both of which are available on sunsite.unc.edu, and both
- of which contain everything you need to boot a diskless Linux client.
-
-3.6) Using pxelinux
- Pxelinux may be used to boot linux using the PXE boot loader
- which is present on many modern network cards.
-
- When using pxelinux, the kernel image is specified using
- "kernel <relative-path-below /tftpboot>". The nfsroot parameters
- are passed to the kernel by adding them to the "append" line.
- It is common to use serial console in conjunction with pxeliunx,
- see Documentation/serial-console.txt for more information.
-
- For more information on isolinux, including how to create bootdisks
- for prebuilt kernels, see http://syslinux.zytor.com/
-
-
-
-
-4.) Credits
- -------
-
- The nfsroot code in the kernel and the RARP support have been written
- by Gero Kuhlmann <gero@gkminix.han.de>.
-
- The rest of the IP layer autoconfiguration code has been written
- by Martin Mares <mj@atrey.karlin.mff.cuni.cz>.
-
- In order to write the initial version of nfsroot I would like to thank
- Jens-Uwe Mager <jum@anubis.han.de> for his help.
New super_block field "struct export_operations *s_export_op" for
explicit support for exporting, e.g. via NFS. The structure is fully
documented at its declaration in include/linux/fs.h, and in
-Documentation/filesystems/Exporting.
+Documentation/filesystems/nfs/Exporting.
Briefly it allows for the definition of decode_fh and encode_fh operations
to encode and decode filehandles, and allows the filesystem to use
No delay
ip= [IP_PNP]
- See Documentation/filesystems/nfsroot.txt.
+ See Documentation/filesystems/nfs/nfsroot.txt.
ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
See comment before ip2_setup() in
going to be removed in 2.6.29.
nfsaddrs= [NFS]
- See Documentation/filesystems/nfsroot.txt.
+ See Documentation/filesystems/nfs/nfsroot.txt.
nfsroot= [NFS] nfs root filesystem for disk-less boxes.
- See Documentation/filesystems/nfsroot.txt.
+ See Documentation/filesystems/nfs/nfsroot.txt.
nfs.callback_tcpport=
[NFS] set the TCP port on which the NFSv4 callback
*/
/*
- * See Documentation/filesystems/Exporting
+ * See Documentation/filesystems/nfs/Exporting
* and examples in fs/exportfs
*
* Since cifs is a network file system, an "fsid" must be included for
* and for mapping back from file handles to dentries.
*
* For details on why we do all the strange and hairy things in here
- * take a look at Documentation/filesystems/Exporting.
+ * take a look at Documentation/filesystems/nfs/Exporting.
*/
#include <linux/exportfs.h>
#include <linux/fs.h>
*
* The following files are helpful:
*
- * Documentation/filesystems/Exporting
+ * Documentation/filesystems/nfs/Exporting
* fs/exportfs/expfs.c.
*/
If you want your system to mount its root file system via NFS,
choose Y here. This is common practice for managing systems
without local permanent storage. For details, read
- <file:Documentation/filesystems/nfsroot.txt>.
+ <file:Documentation/filesystems/nfs/nfsroot.txt>.
Most people say N here.
* @get_name: find the name for a given inode in a given directory
* @get_parent: find the parent of a given directory
*
- * See Documentation/filesystems/Exporting for details on how to use
+ * See Documentation/filesystems/nfs/Exporting for details on how to use
* this interface correctly.
*
* encode_fh:
If unsure, say Y. Note that if you want to use DHCP, a DHCP server
must be operating on your network. Read
- <file:Documentation/filesystems/nfsroot.txt> for details.
+ <file:Documentation/filesystems/nfs/nfsroot.txt> for details.
config IP_PNP_BOOTP
bool "IP: BOOTP support"
does BOOTP itself, providing all necessary information on the kernel
command line, you can say N here. If unsure, say Y. Note that if you
want to use BOOTP, a BOOTP server must be operating on your network.
- Read <file:Documentation/filesystems/nfsroot.txt> for details.
+ Read <file:Documentation/filesystems/nfs/nfsroot.txt> for details.
config IP_PNP_RARP
bool "IP: RARP support"
older protocol which is being obsoleted by BOOTP and DHCP), say Y
here. Note that if you want to use RARP, a RARP server must be
operating on your network. Read
- <file:Documentation/filesystems/nfsroot.txt> for details.
+ <file:Documentation/filesystems/nfs/nfsroot.txt> for details.
# not yet ready..
# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
/*
* Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- * command line parameter. See Documentation/filesystems/nfsroot.txt.
+ * command line parameter. See Documentation/filesystems/nfs/nfsroot.txt.
*/
static int __init ic_proto_name(char *name)
{
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff